Display Portal Server Statistics - 3Com S7906E Command Reference Manual

6300 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

Table 1-5 display portal server command output description
Field
1)
aaa
IP
Key
Port
URL

display portal server statistics

Syntax
display portal server statistics { all | interface interface-type interface-number }
View
Any view
Default Level
1: Monitor level
Parameters
all: Specifies all interfaces.
interface interface-type interface-number: Specifies an interface by its type and name.
Description
Use the display portal server statistics command to display portal server statistics on a specified
interface or all interfaces.
Note that with the all keyword specified, the command displays portal server statistics by interface
and therefore statistics about a portal server referenced by more than one interface may be displayed
repeatedly.
Examples
# Display portal server statistics on Vlan-interface 2.
<Sysname> display portal server statistics interface Vlan-interface 2
---------------Interface: Vlan-interface2----------------------
Server name: st
Invalid packets: 0
Pkt-Name
REQ_CHALLENGE
ACK_CHALLENGE
REQ_AUTH
Number of the portal server
Name of the portal server
IP address of the portal server
Key for portal authentication
Not configured will be displayed if no key is configured.
Listening port on the portal server
Address the packets are to be redirected to
Not configured will be displayed if no address is configured.
Total
Discard Checkerr
3
0
3
0
3
0
1-9
Description
0
0
0

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents