3Com S7906E Command Reference Manual page 2009

View
Any view
Default Level
0: Visit level (in user view)
2: System level (in other views)
Parameters
None
Description
Use the quit command to exit to a lower-level view. If the current view is user view, the quit command
terminates the current connection and exit the device.
Examples
# Switch from Ethernet 2/0/1 interface view to system view, and then to user view.
[Sysname-Ethernet2/0/1] quit
[Sysname] quit
<Sysname>
return
Syntax
return
View
Any view except user view
Default Level
2: System level
Parameters
None
Description
Use the return command to return to user view from current view, as you do with the hot key Ctrl+Z.
Related commands: quit.
Examples
# Return to user view from Ethernet2/0/1 view.
[Sysname-Ethernet2/0/1] return
<Sysname>
1-18