3Com S7906E Command Reference Manual page 1952

Parameters
destination { dest dest-prefix |
dest/dest-prefix | any }
dscp dscp
logging
fragment
time-range time-range-name
If the protocol argument is set to tcp or udp, you may define the parameters in the following table.
Function
Specifies a destination IPv6
address.
Specifies a DSCP preference
Specifies to log matched
packets
Specifies that the rule applies
to only IP fragments.
Specifies the time range in
which the rule can take effect.
1-28
Description
The dest and dest-prefix
arguments specify a
destination IPv6 address, and
its prefix length in the range 1 to
128.
The any keyword indicates any
IPv6 destination address.
The dscp argument can be a
number in the range 0 to 63, or
in words, af11(10), af12(12),
af13(14), af21(18), af22(20),
af23(22), af31(26), af32(28),
af33(30), af41(34), af42(36),
af43(38), cs1(8), cs2(16),
cs3(24), cs4(32), cs5(40),
cs6(48), cs7(56), default(0), or
ef(46).
––
––
The time-range-name
argument comprises 1 to 32
characters. It is case
insensitive and must start with
an English letter. To avoid
confusion, this name cannot be
all.