3Com S7906E Command Reference Manual page 1619

group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
Description
Use the display bgp vpnv4 group command to display information about a specified or all BGP
VPNv4 peer groups.
Examples
# Display information about BGP VPNv4 peer group a for VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 group a
BGP peer-group is a
remote AS number not specified
Type : external
Maximum allowed prefix number: 150000
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 99
No routing policy is configured
Members:
Peer V
10.1.1.1 4
Table 1-2 display bgp vpnv4 group command output description
BGP peer-group
remote AS number
Type
Maximum allowed prefix number
Threshold
Configured hold timer value
Keepalive timer value
Peer Preferred Value
No routing policy is configured
Peer
V
AS
MsgRcvd
MsgSent
OutQ
AS MsgRcvd MsgSent
200 18 21
Field
OutQ PrefRcv Up/Down
0 1 00:12:58 Established
Description
Name of the BGP peer group
Number of the remote AS
Type of the BGP peer group
Maximum number of routes that the VPN instance
supports
Threshold value
Setting of the hold timer
Keepalive interval
Weight for the routes from the peer
Whether the VPN instance is configured with a routing
policy
IP address of the peer
Version of BGP that the peer runs
AS number of the peer group
Number of messages received
Number of messages sent
Number of messages waiting to be sent to the peer
1-7
State