Peer Preferred-Value (Bgp-Vpnv4 Subaddress Family View) - 3Com S7906E Command Reference Manual

Examples
# In BGP-VPNv4 subaddress family view, configure the device to use the local address as the next hop
of a route when advertising it to peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer test next-hop-local
# In BGP-L2VPN address family view, configure the device to use the local address as the next hop of
a route when advertising it to peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] l2vpn-family
[Sysname-bgp-af-l2vpn] peer test next-hop-local

peer preferred-value (BGP-VPNv4 subaddress family view)

Syntax
peer { group-name | ip-address } preferred-value value
undo peer { group-name | ip-address } preferred-value
View
BGP-VPNv4 subaddress family view
Default Level
2: System level
Parameters
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: IP address of the peer.
value: Preferred value to be specified, in the range 0 to 65535.
Description
Use the peer preferred-value command to specify the preferred value for the routes received from the
specified peer/peer group.
Use the undo peer preferred-value command to restore the default.
By default, the preferred value for the routes received from a peer/peer group is 0.
Examples
# Set the preferred value for the routes received from peer 131.108.1.1 to 50.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer 131.108.1.1 preferred-value 50
1-43