Port Priority Configuration Commands; Qos Priority - 3Com S7906E Command Reference Manual

View
System view
Default Level
2: System Level
Parameters
dot1p-lp: Specifies the 802.1p precedence-to-local precedence mapping table.
dot1p-dp: Specifies the 802.1p precedence-to-drop precedence mapping table.
dscp-dp: Specifies the DSCP-to-drop precedence mapping table.
dscp-dot1p: Specifies the DSCP-to-802.1p precedence mapping table.
dscp-dscp: Specifies the DSCP-to-DSCP mapping table.
Description
Use the qos map-table command to enter specific priority mapping table view.
Related commands: display qos map-table.
Examples
# Enter 802.1p precedence-to-drop precedence mapping table view.
<Sysname> system-view
[Sysname] qos map-table dot1p-dp
[Sysname-maptbl-dot1p-dp]

Port Priority Configuration Commands

qos priority

Syntax
qos priority priority-value
undo qos priority
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
priority-value: Port priority to be configured. This argument is in the range 0 to 7.
Description
Use the qos priority command to set the port priority for a port.
Use the undo qos priority command to restore the default port priority.
By default, the port priority is 0.
5-3