Display Mpls L2Vpn Forwarding-Info - 3Com S7906E Command Reference Manual

Table 1-18 mpls l2vpn connection summary command output description
Field
connections
No.
vpn-name
local-num
remote-num
unknown-num
up-num
total-num

display mpls l2vpn forwarding-info

Syntax
display mpls l2vpn forwarding-info [ vc-label ] interface interface-type interface-number [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
vc-label: L2VPN VC label, in the range 16 to 4294967295.
interface-type interface-number: Specifies an interface by its type and number.
|: Uses a regular expression to filter the output information. For details about regular expression, refer to
Basic System Configuration in the System Volume.
begin: Displays all lines starting with the line that matches the regular expression.
exclude: Displays all lines other than those matching the regular expression..
include: Displays all lines matching the regular expression.
regular-expression: Regular expression, a case-sensitive string of 1 to 80 characters.
Description
Use the display mpls l2vpn forwarding-info command to display MPLS L2VPN forwarding
information.
Examples
# Display MPLS L2VPN forwarding information.
<Sysname> display mpls l2vpn forwarding-info interface Vlan-interface 2
Statistics about connections, including the number of connections in the
state of Up, the number of connections in the state of Down, the number of
local connections, the number of remote connections, and the number of
unknown connections
Sequence number
Name of the VPN
Number of local connections
Number of remote connections
Number of unknown connections
Number of connections that are up
Total number of connections
1-18
Description