3Com S7906E Command Reference Manual page 1747

Related commands: accounting default, radius scheme.
Examples
# In the default ISP domain system, specify the accounting scheme for portal users to RADIUS scheme,
with the name rd.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting portal radius-scheme rd
attribute
Syntax
attribute { access-limit max-user-number | idle-cut minute | ip ip-address | location { [ nas-ip
ip-address ] port slot-number subslot-number port-number } | mac mac-address | vlan vlan-id } *
undo attribute { access-limit | idle-cut | ip | location | mac |vlan } *
View
Local user view
Default Level
2: System level
Parameters
access-limit max-user-number: Specifies the maximum number of concurrent users that can log in
using the current username, which ranges from 1 to 1024.
idle-cut minute: Configures the idle cut function. The idle cut period ranges from 1 to 120, in minutes.
ip ip-address: Specifies the IP address of the user.
location: Specifies the port binding attribute of the user.
nas-ip ip-address: Specifies the IP address of the port of the remote access server bound by the user.
The default is 127.0.0.1, that is, the device itself. This keyword and argument combination is required
only when the user is bound to a remote port.
port slot-number subslot-number port-number: Specifies the port to which the user is bound. The value
of slot-number and subslot-number both range from 0 to 15. The value of port-number ranges from 0 to
255. The ports bound are determined by port number, regardless of port type.
mac mac-address: Specifies the MAC address of the user in the format of H-H-H.
vlan vlan-id: Specifies the VLAN to which the user belongs. The vlan-id argument is in the range 1 to
4094.
Description
Use the attribute command to set some of the attributes for a LAN access user.
Use the undo attribute command to remove the configuration.
Note that:
The attribute access-limit command for local users is effective only after local accounting scheme
is configured.
1-6