Description (Any Nqa Test Type View) - 3Com S7906E Command Reference Manual

[Sysname-nqa-admin-test-icmp-echo] data-fill abcd
data-size
Syntax
data-size size
undo data-size
View
ICMP-echo, UDP-echo, UDP-jitter test type view
Default Level
2: System level
Parameters
size: Size of a probe packet in bytes, in the range 20 to 8100 for an ICMP-echo or a UDP-echo test and
in the range 68 to 8100 for a UDP-jitter test.
Description
Use the data-size command to configure the size of a probe packet sent.
Use the undo data-size command to restore the default.
By default, the size of a probe packet is 100 bytes.
For an ICMP-echo test, the size of a packet sent in a probe is the length of the data field in an ICMP
echo message.
For a UDP-echo test and UDP-jitter test, the size of a packet sent in a probe is the length of the
data field in a UDP packet.
Examples
# Configure the size of an ICMP-echo probe packet as 80 bytes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] data-size 80

description (any NQA test type view)

Syntax
description text
undo description
View
Any NQA test type view
Default Level
2: System level
1-2