3Com S7906E Command Reference Manual page 1423

1
IPv6 MBGP Configuration Commands
IPv6 MBGP Configuration Commands
balance (IPv6 MBGP address family view)
Syntax
balance number
undo balance
View
IPv6 MBGP address family view
Default Level
2: System level
Parameters
maximum: Number of IPv6 MBGP routes for load balancing, in the range 1 to 4. When it is set to 1, load
balancing is disabled.
Description
Use the balance command to configure the number of IPv6 MBGP routes used for load balancing.
Use the undo balance command to disable load balancing.
By default, load balancing is disabled.
Unlike IGP, IPv6 MBGP has no explicit metric for making load balancing decisions. Instead, it
implements load balancing by using IPv6 MBGP route selection rules.
Related commands: display ipv6 multicast routing-table.
Examples
# In IPv6 MBGP address family view, set the number of IPv6 MBGP routes for load balancing to 2.
<Sysname> system-view
[Sysname]bgp 100
[Sysname-bgp]ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] balance 2
bestroute as-path-neglect (IPv6 MBGP address family view)
Syntax
bestroute as-path-neglect
undo bestroute as-path-neglect
1-1