Display Poe Pse Interface Power - 3Com S7906E Command Reference Manual

Field
port(s) on
consumed
Remaining

display poe pse interface power

Syntax
display poe pse pse-id interface power
View
Any view
Default Level
1: Monitor level
Parameters
pse pse-id: Specifies a PSE ID. You can use the display poe device command to view the mapping
between PSE ID and slot.
Description
Use the display poe pse interface power command to display the power information of PoE
interfaces connected with the PSE.
Examples
# Display the power information of PoE interfaces connected with PSE 7.
<Sysname> display poe pse 7 interface power
Interface CurPower PeakPower MaxPower PD Description
(W)
GE2/0/25 4.4
GE2/0/26 4.4
GE2/0/27 15.0
GE2/0/28 0
GE2/0/29 0
GE2/0/30 0
--- 3 port(s) on,
Table 1-8 display poe pse interface power command output description
Interface
CurPower
PeakPower
MaxPower
Number of PoE interfaces that are supplying power
Power consumed by PoE interfaces on the PSE
Remaining power on the PSE
(W) (W)
4.5 4.6
4.5 15.4
15.3 15.4
0 5
0 4
0 5
23.8(W) consumed,
Field
Description
IP Phone on Room 309 for Peter Smith
IP Phone on Room 409 for Peter Pan
Acess Point on Room 509 for Peter
IP Phone on Room 609 for Peter John
IP Phone on Room 709 for Jack
IP Phone on Room 809 for Alien
776.2(W) Remaining ---
Shortened form of a PoE interface
Current power of a PoE interface
Peak power of a PoE interface
Maximum power of a PoE interface
1-12
Description