Reset Igmp Group Port-Info - 3Com S7906E Command Reference Manual

group-address: Multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
source-address: Multicast source address.
mask: Subnet mask of the multicast group/source address, 255.255.255.255 by default.
mask-length: Subnet mask length of the multicast group/source address. For a multicast group address,
this argument has an effective value range of 4 to 32; for a multicast source address, this argument has
an effective value range of 0 to 32. The system default is 32 in both cases.
Description
Use the reset igmp group command to clear IGMP multicast group information.
Note that:
If neither all-instance nor vpn-instance is specified, this command will display the information on
the public instance
This command cannot clear IGMP multicast group information of static joins.
Related commands: display igmp group.
Examples
# Clear all IGMP multicast group information on all interfaces.
<Sysname> reset igmp group all
# Clear all IGMP multicast group information on VLAN-interface 100.
<Sysname> reset igmp group interface vlan-interface 100 all
# Clear IGMP multicast group information about multicast group 225.0.0.1 on VLAN-interface 100.
<Sysname> reset igmp group interface vlan-interface 100 225.0.0.1

reset igmp group port-info

Syntax
reset igmp group port-info { all | group-address } [ vlan vlan-id ]
View
User view
Default Level
2: System level
Parameters
all: Clears Layer 2 port information of all the IGMP multicast groups.
group-address: Clears Layer 2 port information of the specified IGMP multicast group. The effective
range of group-address is 224.0.1.0 to 239.255.255.255.
vlan-id: Clears Layer 2 port information of IGMP multicast groups in the specified VLAN. The effective
range of vlan-id is 1 to 4094.
Description
Use the reset igmp group port-info command to clear Layer 2 port information of IGMP multicast
groups.
1-24