Igmp Last-Member-Query-Interval; Igmp Max-Response-Time - 3Com S7906E Command Reference Manual

igmp last-member-query-interval

Syntax
igmp last-member-query-interval interval
undo igmp last-member-query-interval
View
Interface view
Default Level
2: System level
Parameters
interval: IGMP last member query interval in seconds, with an effective range of 1 to 5.
Description
Use the igmp last-member-query-interval command to configure the last member query interval,
namely the length of time the device waits between sending IGMP group-specific queries, on the
current interface.
Use the undo igmp last-member-query-interval command to restore the system default.
By default, the IGMP last member query interval is 1 second.
Related commands: last-member-query-interval, igmp robust-count, display igmp interface.
Examples
# Set the IGMP last member query interval to 3 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp last-member-query-interval 3

igmp max-response-time

Syntax
igmp max-response-time interval
undo igmp max-response-time
View
Interface view
Default Level
2: System level
Parameters
interval: Maximum response time in seconds for IGMP general queries, with an effective range of 1 to
25.
1-13