Igmp Robust-Count; Igmp Send-Router-Alert - 3Com S7906E Command Reference Manual

igmp robust-count

Syntax
igmp robust-count robust-value
undo igmp robust-count
View
Interface view
Default Level
2: System level
Parameters
robust-value: IGMP querier robustness variable, with an effective range of 2 to 5. The IGMP robustness
variable determines the default number of general queries the IGMP querier sends on startup and the
number of IGMP group-specific queries the IGMP querier sends upon receiving an IGMP leave
message.
Description
Use the igmp robust-count command to configure the IGMP querier robustness variable on the
current interface.
Use the undo igmp robust-count command to restore the system default.
By default, the IGMP querier robustness variable is 2.
Related commands: robust-count, igmp timer query, igmp last-member-query-interval, igmp
timer other-querier-present, display igmp interface.
Examples
# Set the IGMP querier robustness variable to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp robust-count 3

igmp send-router-alert

Syntax
igmp send-router-alert
undo igmp send-router-alert
View
Interface view
Default Level
2: System level
Parameters
None
1-15