Multicast Routing And Forwarding Configuration Commands - 3Com S7906E Command Reference Manual

1
Multicast Routing and Forwarding Configuration
Commands
The term "router" in this document refers to a router in the generic sense or a Layer 3 switch running an
IP multicast routing protocol.

Multicast Routing and Forwarding Configuration Commands

display multicast boundary
Syntax
display multicast [ all-instance | vpn-instance vpn-instance-name ] boundary [ group-address
[ mask | mask-length ] ] [ interface interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
all-instance: Specifies all instances.
vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
group-address: Multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
mask: Mask of the multicast group address, 255.255.255.255 by default.
mask-length: Mask length of the multicast group address, in the range of 4 to 32. The system default is
32.
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display multicast boundary command to view the multicast boundary information on the
specified interface or all interfaces.
Note that if neither all-instance nor vpn-instance is specified, this command displays the information
on the public instance.
1-1