Pim State-Refresh-Capable; Pim Timer Graft-Retry - 3Com S7906E Command Reference Manual

[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim sm

pim state-refresh-capable

Syntax
pim state-refresh-capable
undo pim state-refresh-capable
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the pim state-refresh-capable command to enable the state fresh feature on the interface.
Use the undo pim state-refresh-capable command to disable the state fresh feature.
By default, the state refresh feature is enabled.
Related commands: state-refresh-interval, state-refresh-rate-limit, state-refresh-ttl.
Examples
# Disable state refresh on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] undo pim state-refresh-capable

pim timer graft-retry

Syntax
pim timer graft-retry interval
undo pim timer graft-retry
View
Interface view
Default Level
2: System level
Parameters
interval: Graft retry period in seconds, with an effective range of 1 to 65,535.
1-41