Parameter Setting - Mitsubishi Electric L26CPU-BT User Manual

Melsec-l cc-link system master/local module
Hide thumbs Also See for L26CPU-BT:
Table of Contents

Advertisement

CHAPTER 11 EXAMPLE OF COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE DEVICE STATIONS
11.2.2

Parameter setting

(1) Setting the network parameters and automatic refresh parameters of the
master station
Set the network parameters and automatic refresh parameters as follows.
Refer to
Page 264, Section 11.2.2 (2) for the operation setting. Refer to
(3) for the station information setting.
Refer to
Page 265, Section 11.2.2 (4) for the remote device station initial setting.
● Do not set the same refresh devices as the following.
• Refresh parameters of modules on the network
• I/O numbers used for I/O modules and an intelligent function module
• Auto refresh settings of an intelligent function module
● To set X or Y as a refresh device, set a unique I/O number used for I/O modules and an intelligent function module.
Page 264, Section 11.2.2
Refer to Section 11.2.2 (2).
Refer to Section 11.2.2 (3).
Refer to Section 11.2.2 (4).
11
263

Advertisement

Table of Contents
loading

This manual is also suitable for:

L26cpu-pbtLj61bt11

Table of Contents