Table of Contents
Advertisement
(3) Example of Parameter setting/Program
This program sets the network parameters for the master module mounted at the I/O numbers X/Y00 to X/Y1F
and starts the data link.
(X/Y90 to X/YAF)
(a) PLC parameter setting
Master station
Station number 1
Local station
(occupies 1 station)
1.
2.
CHAPTER 9 DEDICATED INSTRUCTIONS AND PROGRAMMING
Station number 2
Remote I/O station
(Error invalid station)
(occupies 1 station)
I/O assignment setting window
Set the following for the master module.
The type setting is required; set other items as needed.
Type: Select "Intelligent"
Model name: Enter the module model name.
Points: Select 32 points
Start XY: Enter the start I/O number for the master
module.
Intelligent function module switch setting
Click the Switch Setting button in the I/O assignment
setting window to display the window shown to the left.
Set the input format to hexadecimal and enter values for
switches 1 to 4. The switch settings are indicated in the
following table.
Station number 3
Remote I/O station
(Reserved station)
(occupies 1 station)
229
9
Advertisement
Table of Contents
Troubleshooting
