Table of Contents
Advertisement
• Transient transmission
The following table indicates whether send/receive of transient data is enabled or not.
Send station
Ver. 2 mode
Master station
Additional mode
Ver.1 mode
Ver. 2 mode
Local station
Additional mode
Ver.1 mode
Ver.2 mode
Intelligent
device station
Ver.1 mode
(c) Differences in functions between the modes of the L series master/local module
The following table lists differences in functions between the modes of the L series master/local module.
Item
Storage area for
RX/RY/RWr/RWw
RWr/RWw of remote I/O
stations
Zero points setting for a
reserved station
Remote I/O station points
setting
*1
For the remote I/O net mode, RWr/RWw is not used.
44
Master station
Ver.2
Additional
mode
mode
: Transient transmission enabled, : Transient transmission disabled, : Prohibited
Mode of the L series master/local module
Remote net Ver.1 mode,
remote I/O net mode
Ver.1 compatible area
*1
4 points per station
Not available
Not available
Receive station
Local station
Ver.1
Ver.2
Additional
mode
mode
mode
Remote net Ver.2 mode
Ver.2 compatible area
0 point (RWr and RWw move
over forward.)
Available
Available
Intelligent device
station
Ver.1
Ver.2
Ver.1
mode
mode
mode
Remote net additional
mode
Ver.1-compatible station: Ver.1-
compatible area
Ver.2-compatible station: Ver.2-
compatible area
4 points per station
Not available
Not available
Advertisement
Table of Contents
Troubleshooting
