Table of Contents
Advertisement
CHAPTER 11 EXAMPLE OF COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE DEVICE STATIONS
11.1.3
Creating a program
This section shows a program used to control remote device stations.
The following diagrams show the relationships of the remote input/output and remote registers between the
programmable controller CPU devices and the remote device station.
The shaded areas indicate the devices that are actually used.
For detailed information about each remote device station, refer to the User's Manual for each module.
[Remote input (RX) and remote output (RY)]
Programmable controller CPU
X100F to X1000
X101F to X1010
X102F to X1020
X103F to X1030
X104F to X1040
X105F to X1050
Y100F to Y1000
Y101F to Y1010
Y102F to Y1020
Y103F to Y1030
Y104F to Y1040
Y105F to Y1050
Remote device station (station number 1)
AJ65VBTCU-68ADVN
RX0F
to
RX00
RX1F
to
RX10
RY0F
to
RY00
RY1F
to
RY10
11
255
Advertisement
Table of Contents
Troubleshooting
