Mitsubishi Electric L26CPU-BT User Manual page 285

CHAPTER 11 EXAMPLE OF COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE DEVICE STATIONS
AJ65VBTCU-68DAVN initial setting change
Initial setting change
AJ65VBTCU-68DAVN digital value setting
Digital value
setting
AJ65VBTCU-68DAVN analog output enable/disable setting
Analog output
enable
AJ65VBTCU-68DAVN error occurrence processing
Error reset
The program enclosed by the dotted line is necessary only when the initial settings are changed.
AJ65VBTCU-68DAVN
Analog output enable/
disable setting (RWw8)
CH.1 to CH.4 output range
setting (RWw9)
Turns on initial data setting
request flag (RY19).
Turns off initial data setting
request flag (RY19).
AJ65VBTCU-68DAVN
CH.1 digital value
setting (RWw0) : 500
CH.2 digital value
setting (RWw1) : 1000
Turns on CH.1 analog
output enable/disable
flag (RY00).
Turns on CH.2 analog
output enable/disable
flag (RY01).
Read CH. check code
(RWr0, RWr1).
Reads error code (RWr8).
Turns on error reset
request flag (RY1A).
Turns off error reset
request flag (RY1A).
283
11