CHAPTER 12 EXAMPLE OF COMMUNICATION BETWEEN THE MASTER STATION AND LOCAL STATIONS
12.1.2
Setting the master station parameters
(1) Setting the network parameters and automatic refresh parameters
Set the network parameters and automatic refresh parameters as follows.
Refer to
Page 288, Section 12.1.2 (2) for the operation setting. Refer to
(3) for the station information setting.
● Do not set the same refresh devices as the following.
• Refresh parameters of modules on the network
• I/O numbers used for I/O modules and an intelligent function module
• Auto refresh settings of an intelligent function module
● To set X or Y as a refresh device, set a unique I/O number used for I/O modules and an intelligent function module.
Page 288, Section 12.1.2
Refer to Section 12.1.2 (2).
Refer to Section 12.1.2 (3).
12
287