Mitsubishi Electric L26CPU-BT User Manual page 59

(3) Access to station No.64
(a) To a local station of No. 64, other station access from GX Works2 or GOT is not
allowed.
If the station No. is changed to any of 0 to 63, other station access is executable.
(b) From the CC-Link board, other station access is not allowed to access a local
station or intelligent device station whose station No. is 64.
If the station No. is changed to any of 0 to 63, other station access is executable.
(4) Precautions on the retry count setting for use of dedicated instructions
Note that some dedicated instructions are not applicable to the retry count setting. For details, refer to
Page 192, Section 9.1.1 (3).
For the retry count setting for use of dedicated instructions, there are no restrictions on CPU module models.
CHAPTER 5 SYSTEM CONFIGURATION
5
57