Mitsubishi Electric L26CPU-BT User Manual page 420

Number Name
SW0058
Detailed LED display
(658 )
status
H
SW0059
Transmission speed
(659 )
setting
H
SW005B
Transmission speed
(65B )
operation status
H
418
Stores the details of the LED display status.
0: OFF
1: ON
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0
Stores the transmission speed setting status.
0: Cancel
1: Set
b15 b14 b8 b7 b6 b5 b4 b3
0 to 0
Auto-tracking is available only for the local station and standby master station.
Stores the transmission speed operation status.
0: Not in operation
1: In operation
b15 b14 b8 b7 b6 b5 b4 b3
to
0 0
Auto-tracking is available only for the local station and standby master station.
Description
0 0
LINE(ERR.) : Cable is disconnected or the
transmission path is affected by
noise.
TIME(ERR.) : Responses cannot be received from
any station due to the cable being
disconnected or the transmission
path being affected by noise.
PRM(ERR.) : Invalid parameter value
M/S(ERR.) : Duplicate master station on the
same line
SW(ERR.) : Error in switch settings
LOCAL : Operating as a local station
S MST : Operating as the standby master
station
MST : Operating as the master station
ERR. : Error occurrence
RUN : The module is operating normally.
b2 b1 b0
0 0 0
10Mbps
5Mbps
2.5Mbps
625kbps
156kbps
Auto-tracking
b2 b1 b0
0 0 0
10Mbps
5Mbps
2.5Mbps
625kbps
156kbps
During auto-tracking
Availability
(: Available, : Not
available)
Online
Offline
Master Local
station station
  
  
  