Mitsubishi Electric L26CPU-BT User Manual page 206

(5) Program example
When X0 is turned ON, 10-word data are written from the area starting D0 in a local station (station No.1), which
is connected to the master module in the I/O No. position of X/Y40 to X/Y5F, into the area starting from D1000.
(When the link special register (SW) refresh device is set to SW0000)
M13 is the G(P).RIWT instruction executing flag.
204
Performs processing for receive completion.
Performs processing for normal completion.
Performs processing for abnormal completion.
Control data setting
Dedicated instruction execution
Sets G(P).RIRD instruction
executing flag to ON.
Processing upon completion
of reception
Processing upon normal
completion of dedicated instruction.
Processing upon failure
of dedicated instruction
Sets G(P).RIRD instruction
executing flag to OFF.