Creating A Program - Mitsubishi Electric L26CPU-BT User Manual

CHAPTER 11 EXAMPLE OF COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE DEVICE STATIONS
11.2.3

Creating a program

This section shows a program used to control remote device stations.
The following diagrams show the relationships of the remote input/output and remote registers between the
programmable controller CPU devices and the remote device stations.
The shaded areas indicate the devices that are actually used.
For detailed information about each remote device station, refer to the User's Manual for each module.
[Remote input (RX) and remote output (RY)]
Programmable controller CPU
X100F to X1000
X101F to X1010
X102F to X1020
X103F to X1030
X104F to X1040
X105F to X1050
X106F to X1060
X107F to X1070
X108F to X1080
X109F to X1090
Y100F to Y1000
Y101F to Y1010
Y102F to Y1020
Y103F to Y1030
Y104F to Y1040
Y105F to Y1050
Y106F to Y1060
Y107F to Y1070
Y108F to Y1080
Y109F to Y1090
Remote device station
(station number 1)
AJ65VBTCU-68ADVN
RX0F to RX00
RX1F to RX10
RY0F to RY00
RY1F to RY10
Remote device station
(station number 4)
AJ65VBTCU-68DAVN
RX0F to RX00
RX1F to RX10
RY0F to RX00
RY1F to RX10
11
267