Mitsubishi Electric L26CPU-BT User Manual page 97

Item
Interrupt Pointer
Start No.
PLC Side
Interrupt Pointer
Count
Start I/O No.
Intelligent
Module Side
Start SI No.
Description
Set the start number (I) of the interrupt pointer.
Set the number of the interrupt conditions set in the "Interrupt
Settings" window of the network parameter.
Set the start I/O number of the L series master/local module.
Set the start number of the SI No. set in "Interrupt (SI) No." in
the "Interrupt Settings" window of the network parameter.
CHAPTER 7 PARAMETER SETTINGS
Setting range
50 to 255 (Default: Blank)
1 to 16 (Default: Blank)
Within the range of I/O points of the
CPU module
(Default: Blank)
0 to 15 (Default: Blank)
7
95