Table of Contents
Advertisement
(b) When the checkbox next to "Set the station information in the CC-Link configuration
window" is not checked
1. Set "Mode" and "Total Module Connected" in the "Network Parameter" window and open "CC-Link Station
Information" window.
Project window
2. Input setting values.
3. When the setting is completed, click the [End] button and close the "CC-Link Station Information" window.
Item
The order of the device station is displayed before the slash.
Station No.
The start station number of the device station is displayed after the slash.
Select the station type of the device station. Set the same type of the device
Station Type
station actually connected.
Select the expanded cyclic setting for the device station. The setting can be
Expanded Cyclic
selected only when "Ver.2 Remote Device Station" or "Ver.2 Intelligent Device
Setting
Station" is set in "Station Type".
Occupied Count
Select the number of occupied stations of the device station.
88
[Parameter]
[Network Parameter]
Description
[CC-Link]
[Station Information] button
Setting range
Varies depending on the mode
set in "Mode".
• Single
• Double
• Quadruple
• Octuple
(Default: Single)
• No Setting
• Occupied Station 1
• Occupied Station 2
• Occupied Station 3
• Occupied Station 4
(Default: Occupied Station 1)
Advertisement
Table of Contents
Troubleshooting
