14.3
Parameter Settings
14.3.1
Setting parameters of the CC-Link IE Field Network master
station
Set the parameters so that the CC-Link master station link special relay/register (SB/SW) is applied to the link refresh
of CC-Link IE Field Network.
By setting the parameters, the access to CC-Link master station link special relay/register (SB/SW) from the master
station on the CC-Link IE Field Network becomes available.
(1) Setting the network parameters
Set the network parameters as follows, using GX Works2.
For the "Network Configuration Setting", refer to
Parameters", refer to
CHAPTER 14 EXAMPLE OF COMMUNICATION WHEN USING THE HEAD MODULE
Page 328, Section 14.3.1 (2). For the "Refresh
Page 328, Section 14.3.1 (3).
14
327