Mitsubishi Electric L26CPU-BT User Manual page 104

Item
Special Relay
(SB)
Set the start device where SB and SW are transferred. By setting
these items, SB and SW can be automatically transferred to a
device in a CPU module without a program.
Special Register
(SW)
Retry Count
Automatic
Reconnection
Station Count
Standby Master
Station No.
PLC Down Select
The settings are not required when the L series master/local
Scan Mode
module is used as a local station or standby master station. (This
Setting
does not apply when "Master Station (Duplex Function)" is
Delay Time
selected in "Type").
Setting
Station
Information
Setting
Remote Device
Station Initial
Setting
Set the conditions used to issue a request for the interrupt to a
Interrupt Settings
CPU module. (Refer to
102
Description
Page 104, Section 7.4.2 (2).)
Setting range
• Device
M, L, B, D, W, R, SB, ZR (W and SB for a head
module only)
• Device number
Within the device range of the CPU module or
head module
(Default: Blank)
• Device
M, L, B, D, W, R, SW, ZR (W and SW for a
head module)
• Device number
Within the device range of the CPU module or
head module
(Default: Blank)

