G(P).Risend - Mitsubishi Electric L26CPU-BT User Manual

9.1.5

G(P).RISEND

The G(P).RISEND instruction automatically performs handshaking with an intelligent device station and writes data to
the buffer memory of the specified intelligent device station.
Available for modules that have signals for the handshake (e.g. AJ65BT-R2N).
Set Internal device
data (System, user)
Bit Word

(S1)

(S2)
(S3) 

(D)
[Instruction [Execution
symbol] condition]
G.RISEND
GP.RISEND
Set data
*1
Device
Start I/O number of the module
Un
(First 2 digits of I/O No. with three digits)
(S1) Start number of the device in which control data is stored.
(S2) Start number of the device to which write data is to be stored.
(S3) Start number of the device in which the interlock signals are stored.
Device that is turned ON for one scan upon completion of writing.
(D)
(D)+1 also turns ON at an abnormal completion.
*1 The file register of each of the local device and the program cannot be used as a device for setting data.
210
Link direct
device
File
J\
register
Bit Word



Command
G.RISEND
Command
GP.RISEND
Description
Usable devices
Intelligent
function module Index register
device Z
U\G




Un (S1)
(S1)
Un
Within the range of the
Within the range of the
Within the range of the
Within the range of the
Constant
K, H $
 
 
 
 
(S2) (S3) (D)
(S2)
(S3) (D)
Setting range Data type
0 to FE
Binary 16 bits
H
specified device
Device name
specified device
specified device
specified device
Other




Bit