Table of Contents
Advertisement
Item
PLC Down Select
Scan Mode Setting
Delay Time Setting
Station Information Setting
Set the station information in the CC-Link
configuration window.
Remote Device Station Initial Setting
Interrupt Settings
Necessity of the setting
Local station,
Master
standby
station
master station
CHAPTER 7 PARAMETER SETTINGS
Remark
The settings are not required when "Remote I/O
Net Mode" is set in "Mode".
Select the setting when graphically configuring
"Station Information Setting" by referring to the
network map display area (for GX Works2 only).
The setting is not required when "Remote I/O Net
Mode" is set in "Mode".
7
75
Advertisement
Table of Contents
Troubleshooting
