Table of Contents
Advertisement
3.
Set the time for logging data acquisition.
Enter the time during which logs are collected.
If "0" is set, log collection is continued until the [Stop Logging] button is clicked or the number of logs
reaches 5000.
4.
Click the [Start Logging] button.
Logs are collected during the specified logging collecting time.
However, the log collection is stopped when the [Stop Logging] button is clicked or the number of logs
reaches 5000.
5.
If an item is selected in the log list, the status of the selected date/time is displayed in the "Log
display part".
(a) Buttons in the dialog box
[Clear Log]
Clears the logs in the module.
When "RAM + Flash ROM" is selected, the logs stored in flash ROM are also cleared. Do not power off the L
series master/local module while the logs stored in flash ROM are being cleared.
[Save]/[Read]
Saves the Log List information in CSV format. Moreover, reads out the saved log file (CSV format) and displays
the data in the Log List.
(2) Precautions
(a) Logging does not start when:
• Clearing the logs stored in the flash ROM is not completed.
(Error code: B323
• With "RAM + Flash ROM" selected, 45 logs are already stored to flash ROM.
(Error code: B324
• The total number of times the logs were stored in flash ROM exceeded 100,000.
(Error code: B325
(b) Log storage area and storable number of logs
The following are the log storage areas:
• RAM area (inside the module): Up to 95 logs
• flash ROM area (inside the module): Up to 45 logs
• HDD for GX Works2 (personal computer): Up to 5000
When storing 96 logs or more (Max. 5000), keep GX Works2 connected even after starting logging.
If the number of logs in the RAM area exceeds 95 without connection to GX Works2, the oldest log is deleted,
and the new log is stored.
)
H
)
H
)
H
CHAPTER 15 TROUBLESHOOTING
381
15
Advertisement
Table of Contents
Troubleshooting
