Creating A Program - Mitsubishi Electric L26CPU-BT User Manual

11.3.3

Creating a program

This section shows a program used to control the remote device stations.
The following diagrams show the relationships of the remote input/output and remote registers between the
programmable controller CPU devices and the remote device station.
The shaded areas indicate the devices that are actually used.
For detailed information about each remote device station, refer to the User's Manual for each module.
[Remote input (RX) and remote output (RY)]
Programmable controller CPU
Ver.1 compatible
X100F to X1000
X101F to X1010
X102F to X1020
X103F to X1030
X104F to X1040
X105F to X1050
Y100F to Y1000
Y101F to Y1010
Y102F to Y1020
Y103F to Y1030
Y104F to Y1040
Y105F to Y1050
Ver.2 compatible
X150F to X1500
X151F to X1510
X152F to X1520
X153F to X1530
Y150F to Y1500
Y151F to Y1510
Y152F to Y1520
Y153F to Y1530
280
Remote device station
(station number 1)
AJ65VBTCU-68ADVN
RX0F to RX00
RX1F to RX10
RY0F to RY00
RY1F to RY10
Remote device station
(station number 4)
AJ65VBTCU-68DAVN
RX0F to RX00
RX1F to RX10
RY0F to RY00
RY1F to RY10