Item
Interrupt Pointer
Start No.
PLC Side
Interrupt Pointer
Count
Start I/O No.
Intelligent
Module Side
Start SI No.
106
Description
Set the start number (I) of the interrupt pointer.
Set the number of the interrupt conditions set in the
"Interrupt Settings" window of the network parameter.
Set the start I/O number of the L series master/local
module.
Set the start number of the SI No. set in "Interrupt (SI)
No." in the "Interrupt Settings" window of the network
parameter.
Setting range
50 to 255 (Default: Blank)
1 to 16 (Default: Blank)
Within the range of I/O points of the
CPU module
(Default: Blank)
0 to 15 (Default: Blank)