Mitsubishi Electric L26CPU-BT User Manual page 93

Item

Set the condition to execute the initial settings.
Condition
Select the device to execute the initial settings.
Device
Set the device number of the device set in "Condition Device". Set a
device with a device number of 0 as the first device of each station.
For instance, 0 to 1F can be set to the device number for the station
Executional
Condition
Device No.
Execute Select whether to execute the initial settings with ON of the condition
Condition device or with OFF of the condition device.

Set the device where the initial setting details are written and the data.
Write Device Select the device where the initial settings are written.
Set the device number of the device set in "Write Device". Set a device
with a device number of 0 as the first device of each station.
For instance, 0 to 1F can be set to the device number for the station
number 4 as shown below.
Details of
Device No.
Execution
Set the data for the initial settings. (The data to be written to the device
Write Data
set in "Write Device" and "Device No.")
Description
number 4 as shown below.
Remote device station
(Station No.1, no. of
Master station occupied stations: 3)
RX0 RX0
Station No.1
RX5F RX5F
RX60
Station No.4
RX7F
Remote device station
(Station No.1, no. of
Master station
occupied stations: 3)
RX0 RX0
Station No.1
RX5F RX5F
RX60
Station No.4
RX7F
CHAPTER 7 PARAMETER SETTINGS
• RX
• SB
(Default: Blank)
Remote device station
• For RX: 0 to 37FH
(Station No.4, no. of
occupied stations: 1)
• For SB: 0 to FFH
(Default: Blank)
RX0
RX1F
• ON
• OFF
(Default: Blank)
• RY
• RWw
(Default: Blank)
• For RY: 0 to 37FH
Remote device station
(Station No.4, no. of
• For RWw: 0 to 7FH
occupied station: 1)
(Default: Blank)
RX0
RX1F
• For RY: ON or OFF
• For RWw: 0 to 65535 (0 to
FFFFH)
(Default: Blank)
Setting range


91
7