Parameter Settings For A Local Station And Standby Master Station; Setting Method - Mitsubishi Electric L26CPU-BT User Manual

7.4
Parameter Settings for a Local Station and Standby
Master Station
This section describes the parameter settings when the L series master/local module is used as a local station or
standby master station.
7.4.1

Setting method

1.
Open the "Network Parameter" window in a programming tool.
Project window
2.
Input settings in the "Network Parameter" window.
3.
Click the [End] button.
4.
Write the settings to the CPU module using the programming tool.
[Online]
5.
The settings are reflected by resetting the CPU module or powering off and on the system. When
the reflection is completed, data link is automatically started in the L series master/local modules.
When changing the settings for a local station or standby master station, change the settings for the master station
accordingly.
98
[Parameter] [Network Parameter]
[Write to PLC]
[CC-Link]