Mitsubishi Electric L26CPU-BT User Manual page 75

● If network parameters are set for modules on a system with both GX Works2 and the G(P).RLPASET instruction, the
number of module(s) whose network parameters are set with the G(P).RLPASET instruction should not be included in the
"Number of Modules" setting of GX Works2.
● To use the built-in CC-Link function, make sure that "Use built-in CC-Link" has been selected in "PLC Parameter" - "PLC
System" - "Built-in CC-Link Setting". (Default: Checked)
If the built-in CC-Link function is not used, clear the checkbox next to "Use built-in CC-Link" in "Built-in CC-Link Setting".
(It will be offline.)
CHAPTER 7 PARAMETER SETTINGS
7
73