Sharp MX-C507P Service Manual page 73

Actions
Step 1
a
From the home screen, touch Settings > Device > Preferences.
b
Check if the paper type and size settings match the paper type
and size set on the tray.
Do the settings match?
Step 2
Change the paper size and type, or adjust the size settings in the
tray.
Does the problem remain?
Step 3
Check the paper for texture or rough finish.
Is the paper textured or rough?
Step 4
Replace the textured or rough paper with plain paper.
Does the problem remain?
Step 5
Remove, and then reinstall the fuser. See
page 370.
Does the problem remain?
Step 6
Replace the fuser. See
Does the problem remain?
Step 7
a
From the home screen, touch Settings > Device > Maintenance
> Configuration Menu > Reports > Event Log.
b
Check the log history for fuser error codes.
Are there fuser error codes on the event log?
Step 8
Perform the service check for the error code found.
Does the problem remain?
Step 9
Replace the LVPS. See
Does the problem remain?
"Fuser removal" on
"Fuser removal" on page
"LVPS removal" on page
Diagnostics and troubleshooting
Yes
Go to step 3.
Go to step 3.
Go to step 4.
Go to step 5.
Go to step 6.
Go to step 7.
370.
Go to step 8.
Go to step 9.
Contact the next
level of support.
342.
39
5028
No
Go to step 2.
The problem is
solved.
Go to step 5.
The problem is
solved.
The problem is
solved.
The problem is
solved.
Go to step 9.
The problem is
solved.
The problem is
solved.