Sharp MX-C507P Service Manual page 304

Action
Step 8
Check if the printer, driver, or job settings are selecting the tray that
holds the RFID media.
Do the settings specify Tray 3 or Tray 4?
Step 9
Configure the printer, driver, or job settings to specify the tray that
holds the RFID media.
Does the problem remain?
Step 10
Check if the RFID media is rotated to the correct orientation for the
user's application.
Note: The orientation of the media loaded in the tray should
match the orientation specified by the user's RFID system
design.
Is the RFID media rotated to the correct orientation?
Step 11
Rotate the media to the correct orientation for the user's
application.
Does the problem remain?
Step 12
The RFID media could be damaged or faulty. If necessary, ask the
user to read and/or write the tags with a desktop or handheld RFID
reader.
Are the tags readable?
Step 13
Replace the RFID media.
Does the problem remain?
Diagnostics and troubleshooting
270
Yes
Go to step 10.
Go to step 10.
Go to step 12.
Go to step 12.
Contact the next
level of support.
Contact the next
level of support.
5028
No
Go to step 9.
The problem is
solved.
Go to step 11.
The problem is
solved.
Go to step 13.
The problem is
solved.