Table of Contents
Advertisement
145 errors
145 error messages
Error code Description
145.80
The motor (BOR) did not turn on.
145.81
The motor (BOR) did not turn off.
145.82
The motor (BOR) speed did not ramp up to the
required level.
145.83
The motor (BOR) stalled.
145.84
The motor (BOR) ran too slow.
145.85
The motor (BOR) ran too fast.
145.86
The motor (BOR) did not run at the correct timing.
Motor (BOR) service check
Action
Step 1
Reset the printer.
Does the problem remain?
Step 2
a
Remove the transfer module. See
on page
371.
b
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Motor tests > Black only
retract
c
Touch Start.
Does the motor run?
Step 3
Manually turn the BOR gear on the transfer module.
Does the gear freely turn?
Step 4
Replace the transfer module. See
page
371.
Does the problem remain?
"Transfer module removal"
"Transfer module removal" on
Diagnostics and troubleshooting
211
Action
"Motor (BOR) service check" on
See
page
211.
Yes
Go to step 2.
Go to step 3.
Contact the next
level of support.
Go to step 9.
5028
No
The problem is
solved.
Go to step 5.
Go to step 4.
The problem is
solved.
Advertisement
Table of Contents
