4
Remove the SIM card.
Top removals
Printhead removal
Note: Some printers might not have a printhead stop installed on the front left corner of the printhead. Make
sure that the stop is installed before removing the printhead.
1
Remove the top cover. See
2
Check the front left corner of the printhead if a printhead stop is installed. If the stop installed, then proceed
to step 5. If the stop is not installed, then proceed to the next step.
3
Unpack the printhead stop and screw.
4
Place the stop (A) next to the printhead, and then fasten the stop with the screw (B).
"Top cover removal" on page
Parts removal
397
305.
5028