Sharp MX-C507P Service Manual page 479

Digital full color laser printer

Hide thumbs Also See for MX-C507P:

Table of Contents

Inspection guide

The purpose of this Inspection guide is to aid you in identifying the intervals, based on page count, at which

parts must be Inspected (for visible physical damage), cleaned, or replaced.

If any unsafe conditions exist, ﬁnd out how serious the hazard could be and if you can continue before you

correct the hazard.

As you service the machine, check for the following:

Damaged, missing, or altered parts, especially in the area of the On/Off switch and the power supply

Damaged, missing, or altered covers, especially in the area of the top cover and the power supply cover

Possible safety exposure from any non-Sharp attachments

Use the following tables to determine when speciﬁed parts should be Inspected:

Media tray - All

Media tray side guides

Media tray length guides

Transfer module (ITM)

Media feeders - All

Media tray pick tires

MPF pick tires

Duplex path rollers

Miscellaneous

Toner spillage

Every service

Inspect and clean if needed

Check for correct positioning

Ensure correct installation

Clean with a damp cloth

Check for media fragments and tears

Check for excessive toner build‑up on white

Clean with damp cloth if needed

Use a toner vacuum and cloth to remove all toner

spillage from the printer