Table of Contents
Advertisement
Setting combination
Stop on Error Mark on Error
No
No
Notes:
•
N is any number greater than 0 as specified in the Retry Count setting.
•
We do not recommend using the last two combination of settings. These settings allow unprogrammed or
failed tags into the output with no indication of failure.
The printer runs slow service check
Action
Step 1
Make sure that the paper setting on the printer matches the paper
used.
Does the problem remain?
Step 2
a
Enter the Configuration menu, and then navigate to:
Device Operations > Automatic Media Type Detection
b
Select Off.
Does the problem remain?
Retry Count
Any number greater
than 0
Diagnostics and troubleshooting
272
Actual behavior
A failed page will be reprinted up to N times. Failed pages
will not be marked. The printer will resume printing with
next page with no error indication after N retries.
Yes
Go to step 2.
Contact the next
level of support.
5028
No
The problem is
solved.
The problem is
solved.
Advertisement
Table of Contents
