Table of Contents
Advertisement
•
If the motor fails, the test failure may not indicate a failed motor. Further troubleshooting may be
required. Check the boards and cables for possible issues.
Registration adjust
This setting lets you adjust the skew, margins, or perform a Quick Test. For more information, see
adjustment" on page
1
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Registration adjust
2
Select a setting to adjust.
Memory tests
This setting lets you test or flash the printer memory or test or format the printer hard disk.
1
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Memory tests
2
Select a setting.
Color alignment adjust
This setting allows you to adjust the color alignments and to print or reset the default settings.
1
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Color alignment adjust
2
Select a setting.
Supply reset
The setting resets the ITM counter values to zero.
1
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Supply reset
2
Select a setting, and then touch Start.
Add-on cards tests
This setting allows you to test the add-on cards installed on the printer.
1
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Add‑on cards tests
2
Select a card.
299.
Service menus
282
5028
"Registration
Advertisement
Table of Contents
