Table of Contents
Advertisement
Behavioral issues (without error codes) of printers with RFID Option
The following table details the actual behavior of the printer to every possible RFID setting combinations. To
access the RFID menu:
1
From the home screen, touch Settings.
2
Select RFID, and then configure the settings.
Note: If the printer continues to behave inconsistently with the menu settings as indicated below, this may
indicate a hardware problem. Contact the next level of support.
Setting combination
Stop on Error Mark on Error
Yes
Yes
Yes
No
No
Yes
Yes
No
Yes
Yes
No
Yes
No
No
Notes:
•
N is any number greater than 0 as specified in the Retry Count setting.
•
We do not recommend using the last two combination of settings. These settings allow unprogrammed or
failed tags into the output with no indication of failure.
Retry Count
0
0
0
Any number greater
than 0
Any number greater
than 0
Any number greater
than 0
0
Diagnostics and troubleshooting
271
Actual behavior
(Default) All failed pages will be marked and a 44.01 error
will be posted.
44.01 error will be posted on all failed pages.
Failed pages will be marked, but no 44.01 error will be
posted.
Failed page will be reprinted up to N times before 44.01
error is posted. Failed pages will not be marked.
Failed pages will be reprinted up to N times. Each failed
page will be marked. After N retries, 44.01 error will be
posted.
Failed pages will be reprinted up to N times. Each failed
page will be marked. After N retries, the printer will move
to the next page in the job. 44.01 error will not be posted.
There will be no indication of failed pages.
5028
Advertisement
Table of Contents
