Sharp MX-C507P Service Manual page 125

Action
Step 11
Check the transfer belt for damage and replace if necessary. See
"Transfer module removal" on page
Does the problem remain?
Step 12
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Motor tests > Fuser
b
Select a setting, and then touch Start.
Does the motor run?
Step 13
Check the cable on the JFUSED1 connector on the controller board
for proper connection and damage, and replace if necessary.
Does the problem remain?
Step 14
a
Replace the motor. See
355.
b
Perform a print job.
Does the problem remain?
Step 15
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Motor tests > K
developer‑transfer
b
Touch Start.
Does the motor run?
Step 16
Check the cable on the JCARTK connector on the controller board
for proper connection and damage, and replace if necessary.
Does the problem remain?
Step 17
a
Replace the motor (K cartridge). See
removal" on page 333.
b
Perform a print job.
Does the problem remain?
371.
"Motor (fuser) removal" on page
"Motor (EP drive)
Diagnostics and troubleshooting
Yes
Go to step 12.
Go to step 15.
Go to step 14.
Go to step 15.
Contact the next
level of support.
Go to step 17.
Contact the next
level of support.
91
5028
No
The problem is
solved.
Go to step 13.
The problem is
solved.
The problem is
solved.
Go to step 16.
The problem is
solved.
The problem is
solved.