Sharp MX-C507P Service Manual page 197

Action
Step 24
Reinstall or replace the sensor. See
through) removal" on page
Does the problem remain?
Step 25
a
Enter the Diagnostics menu, and then navigate to:
Additional input tray diagnostics > Motor tests
b
Find the motor (Pass‑through (tray [x])), and then touch Start.
Does the motor run?
Step 26
Reseat the motor cable, and then check the motor for misalignment
and damage.
Is the motor properly installed and free of damage?
Step 27
Reinstall or replace the motor. See
pass‑through) removal" on page
Does the problem remain?
Step 28
Perform a print test.
Does the problem remain?
RFID Option jam service check
Action
Step 1
Remove Tray 1 insert, and then check if you can pull the media out
of the RFID Option.
Can you remove the media from the RFID Option?
Step 2
Remove the jammed media.
Does the problem remain?
Step 3
a
Reinstall Tray 1 insert, and then remove Tray 3 insert.
b
Pull the jammed media out of the RFID Option.
Does the problem remain?
"Sensor (550-sheet tray pass-
419.
"Motor (550-sheet tray
416.
Diagnostics and troubleshooting
163
Yes
Go to step 25.
Go to step 28.
Go to step 28.
Go to step 28.
Contact the next
level of support.
Yes
Go to step 2.
Contact the next
level of support.
Contact the next
level of support.
5028
No
The problem is
solved.
Go to step 26.
Go to step 27.
The problem is
solved.
The problem is
solved.
No
Go to step 3.
The problem is
solved.
The problem is
solved.