Table of Contents
Advertisement
Permanent page count
This setting displays the total number of pages printed in mono and color. After all the print tests are completed,
this value resets to zero.
1
Enter the Diagnostics menu, and then touch Printer Setup.
2
View the permanent page count.
Enable edge-to-edge (printing)
This setting shifts all four margins to the physical edges of the page.
Note: Contamination of the second transfer roller may result from printing up to the physical edges of the
page.
1
Enter the Diagnostics menu, and then navigate to:
Printer Setup > Enable edge‑to‑edge (printing)
2
Select a setting to adjust.
Note: This feature does not work in PPDS emulation.
Enable edge-to-edge (copy)
This setting determines whether the printer accepts the ADF or flatbed edge erase value when performing an
ADF or flatbed copy.
1
Enter the Diagnostics menu, and then navigate to:
Printer Setup > Enable edge‑to‑edge (copy)
2
Select a setting to adjust.
Processor ID
This setting indicates the ID of the processor on the controller board.
1
Enter the Diagnostics menu, and then touch Printer Setup.
2
View the processor ID.
Serial number
This setting displays a read-only value of the serial number.
1
Enter the Diagnostics menu, and then touch Printer Setup.
2
View the serial number.
Model name
This setting displays the model name of the printer.
1
Enter the Diagnostics menu, and then touch Printer Setup.
2
View the model name.
Service menus
280
5028
Advertisement
Table of Contents
