OPERATION GUIDE Search based on Search based on Search using the Search using the what you want to do what you want to do table of contents table of contents BEFORE USING THE MACHINE COPIER PRINTER MAKE A COPY PRINT A DOCUMENT SEND A FAX FACSIMILE SCANNER / INTERNET FAX...
MAKE A COPY Conserve Reduce copy Make a copy of this Make a copy on mistakes type of original this type of paper Add the date or Assemble output page numbers into a pamphlet Other convenient functions...
Page 3
Conserve Copy multiple pages on Copy on both sides of the one side of one sheet of paper paper Copy on the front and back of a card...
Page 4
Reduce copy mistakes Print one set of copies for proofing...
Page 5
Make a copy of this type of original More original pages than Mixed colour and black & white originals can be loaded at once Mixed-size originals Bulky original (shadows appear at edges)
Page 6
Make a copy on this type of paper Envelopes and other Transparency film special media...
Page 7
Add the date or page numbers Add the date Add a stamp Add the page number Add text...
Page 8
Assemble output into a pamphlet Create a pamphlet Staple output Create a blank margin for hole punching...
Page 9
Other convenient functions Functions used for specific purposes Make a copy of arranged photos Make a mirror-image copy Copy onto the centre of the paper Make a negative copy Convenient functions Give priority to a copy job Check the status of a reserved job Copy a thin original Adjust the colour...
PRINT A DOCUMENT Conserve Print without a Print attractive Assemble output computer output into a pamphlet Print on this type Add text or an of paper image Other convenient functions...
Page 11
Conserve Print on both sides of the Print multiple pages on one paper side of the paper...
Print without a computer F T P Print a file on an FTP Print a file in a USB memory device Print a file in a network Print a file stored in the folder machine...
Page 13
Print attractive output Print matching the size of Adjust the brightness and the paper contrast Print using colour settings Bring out faint text and suitable for the data lines Select the print mode...
Page 14
Assemble output into a pamphlet Create a pamphlet Staple output Create a blank margin for Print specific pages on the hole punching front side of the paper...
Page 15
Print on this type of paper Envelopes Transparency film Print specific pages on Rotate the image 180 different paper degrees...
Page 16
Add text or an image Add a watermark to print Overlay an image on the data print data Overlay a fixed form on the print data...
Page 17
Other convenient functions Correct the size or orientation of the print data Enlarge or reduce the print image Print a mirror-image Security is important Print confidentially Print an encrypted PDF file Functions used for specific purposes Print an "invoice copy" Create a large poster Convenient functions Give priority to a print job...
SEND A FAX Conserve Send this type of Prevent transmission to Send a clear document the wrong destination document Save trouble Security is important Other convenient functions...
Page 19
Conserve Send when the rate is Check received data before lowest printing Relay a transmission through a branch office...
Page 20
Send this type of document Bulky original (shadows More original pages than appear at edges) can be loaded at once ID card or other card Original printed on both sides Mixed-size originals...
Page 21
Prevent transmission to the wrong destination Check the destination once Check the result of more before sending transmission Check the log of previous transmissions...
Page 22
Send a clear document Adjust the exposure Adjust the image quality Specify the size before Send without shadows at sending the edges...
Page 23
Save trouble Store frequently used Send to multiple settings destinations X X X X - 6 7 8 9 X X X X - 6 7 8 9 X X X X - 9 8 7 4 X X X X - 9 8 7 4 View the transmission log Easily specify an address X X X X - 4 5 6 7...
Page 24
Security is important Check the destination once Send confidentially more before sending Initiate reception of a Print protected reception document from a sending data machine Send a document at the other machine's request...
Page 25
Other convenient functions Convenient management functions Forward a received fax to a network address Print a list of addresses Convenient functions Send a thin original Select a transmission destination from a global address book Give priority to a transmission Use an extension phone Check the number of pages for the original then send...
Page 26
SCAN AN IMAGE / SEND AN INTERNET FAX Send a clear Send this type of Prevent transmission to Send a smaller image document the wrong destination file Save trouble Scan from my computer Other convenient functions...
Page 27
Send a clear image Adjust the contrast or Adjust the resolution image quality before sending Send without shadows at Suppress the background of the edges a transmitted document...
Page 28
Send this type of document Bulky original (shadows More original pages than appear at edges) can be loaded at once Mixed-size originals Original printed on both sides Original with background...
Page 29
Prevent transmission to the wrong destination Check the result of Check the log of previous transmission transmissions...
Page 30
Send a smaller file Send at low resolution Compress a file before sending Reduce an image before Send an image in black & sending white ID or other card...
Page 31
Save trouble Store frequently used Send to multiple settings destinations a a a @ a a . a a . c a a a @ a a . a a . c o b b b @ b b . b b . b b b @ b b .
Page 32
Other convenient functions Convenient management functions Forward a received fax to a network address Print a list of transmission destinations Convenient functions Scan a thin original Select a transmission destination from a global address book Send at a specified time Give priority to a transmission Send in USB memory mode Original Sheets Before Transmission...
Page 33
SAVE A JOB AND REUSE IT LATER Search for a file Organize my files Save an important Print a batch of document files...
Page 34
Search for a file Search for a file using a Search by checking the keyword contents of files...
Page 35
Organize my files Delete a file Delete all files Periodically delete files Change the folder...
MAINTAIN THE MACHINE Clean the Replace a toner Replace the Replace the toner machine cartridge staple cartridge collection container...
Page 37
Clean the machine Clean the document glass and Clean the main charger of automatic document feeder the photoconductive drum Clean the original feed Clean the bypass feed roller roller Clean the laser unit...
Page 38
ABOUT OPERATION GUIDE There are two ways to search for a topic in this guide: you can use an "I want to..." menu, or you can use a regular table of contents. The following explanation assumes that Adobe Reader 8.0 is being used (Some buttons do not appear in the default state.).
HOW TO USE THIS MANUAL Click a button below to move to the page that you wish to view. (1) (2) (3) Return to top page button Adobe Reader Help button If an operation does not proceed as expected, click this Opens Adobe Reader Help.
MANUALS PROVIDED WITH THE MACHINE Operation manuals in PDF format (this manual) The manuals in PDF format provide detailed explanations of the procedures for using the machine in each mode. To view the PDF manuals, download them from the hard drive in the machine. The procedure for downloading the manuals is explained in "Downloading the Operation Guide"...
• Aside from instances provided for by law, SHARP is not responsible for failures occurring during the use of the product or its options, or failures due to incorrect operation of the product and its options, or other failures, or for any damage that occurs due to use of the product.
Page 42
This alerts you to a situation where This indicates the name of a system setting and provides a brief there is a risk of machine damage or explanation of the setting. failure. When "System Settings:" appears: A general setting is explained. This provides a supplemental When "System Settings (Administrator):"...
• [POWER SAVE] KEY ....1-16 SHARP OSA ......1-44 USER AUTHENTICATION .
Page 44
BEFORE USING THE MACHINE REPLACING SUPPLIES AND MAINTENANCE REPLACING THE TONER CARTRIDGES..1-47 REPLACING THE TONER COLLECTION CONTAINER ......1-50 REPLACING THE DEVELOPER CARTRIDGE / DRUM CARTRIDGE.
BEFORE USING THE MACHINE BEFORE USING THE MACHINE This section provides basic information about the machine. Please read this chapter before using the machine. PART NAMES AND FUNCTIONS EXTERIOR When a finisher is installed Automatic document feeder Main power switch This is used to power on the machine.
Page 46
BEFORE USING THE MACHINE (10) (11) (12) Keyboard (11) Tray 2/Tray 3/Tray 4 (When 500-sheet paper feed units are installed)* This is a keyboard that is incorporated into the machine. When not used, it can be stored under the operation These hold paper.
BEFORE USING THE MACHINE INTERIOR (13) (14) (15) (16) (17) (18) Toner collection container removed and main charger cover open (19) (20) (21) (22) (23) (13) Developer cartridges (18) Paper reversing section This contains the developer that is necessary to transfer This is used when 2-sided printing is performed.
BEFORE USING THE MACHINE (23) Right side cover release lever To remove a paper misfeed, pull and hold this lever up to open the right side cover. ☞ 8. TROUBLESHOOTING "REMOVING MISFEEDS" (page 8-10) AUTOMATIC DOCUMENT FEEDER AND DOCUMENT GLASS Paper feed roller Original exit tray 2 This roller rotates to automatically feed the original.
BEFORE USING THE MACHINE SIDE AND BACK USB connector (A type) Supports USB 2.0 (Hi-Speed). This is used to connect a USB device such as USB memory to the machine. LAN connector Connect the LAN cable to this connector when the machine is used on a network.
BEFORE USING THE MACHINE OPERATION PANEL JOB STATUS SYSTEM SETTINGS READY PRINT DATA LINE IMAGE SEND DATA LOGOUT HOME Touch panel Numeric keys Messages and keys appear in the touch panel display. These are used to enter the number of copies, fax Touch the displayed keys to perform a variety of numbers, and other numerical values.
Page 51
BEFORE USING THE MACHINE (10) JOB STATUS SYSTEM SETTINGS READY PRINT DATA LINE IMAGE SEND DATA LOGOUT HOME (11) (12) (13) (14) (15) (16) (17) [BLACK & WHITE START] key (14) [STOP] key ( Press this key to copy or scan an original in black and Press this key to stop a copy job or scanning of an white.
BEFORE USING THE MACHINE TOUCH PANEL This section explains how to use the touch panel. • To enter text, see "ENTERING TEXT" (page 1-76). • For information on the screens and procedures for using the system settings, see "Common Operation Methods"...
Page 53
BEFORE USING THE MACHINE Example 4 Function Review Colour Mode Special Modes Full Colour Shift:Right Margin Shift 2-Sided Copy Front:10mm/Back:10mm Plain Erase Edge:10mm Output Exposure Auto File Quick File Copy Ratio Original Paper Select 100% Auto Preview Plain Upper Exit When at least one special mode is selected, the key can be touched to display a list of the key appears in the base screen.
BEFORE USING THE MACHINE STATUS DISPLAY When the base screen of a mode appears, the right side of the touch panel shows the machine's status. The information shown is explained below. Example: Basic screen of copy mode Copies in progress from tray 1. Job Status Job Status Interrupt...
BEFORE USING THE MACHINE SYSTEM BAR The system bar appears at the bottom of the touch panel. The items that appear in the system bar are explained below. MFP Status Colour Mode Special Modes 020/015 Full Colour 2-Sided Copy Copying Plain Output 020/015...
Page 56
BEFORE USING THE MACHINE This icon appears when the data security kit is being used. The icon appears when the machine is communicating with an external application. Brightness adjustment key Touch this key to adjust the brightness of the touch panel.
BEFORE USING THE MACHINE TURNING THE POWER ON AND OFF The machine has two power switches. One is the main power switch on the left side of the machine, and the other is the [POWER] key ( ) on the upper right side of the operation panel. Main power switch [POWER] key When the main power switch is switched on, the main...
BEFORE USING THE MACHINE ENERGY SAVE FUNCTIONS This product has the following two energy save functions that conform to the Energy Star guidelines to help conserve natural resources and reduce environmental pollution. Preheat Mode (Low power mode) Preheat mode automatically lowers the temperature of the fusing unit and thereby reduces power consumption if the machine remains in the standby state for the interval of time set in "Preheat Mode Setting"...
BEFORE USING THE MACHINE USER AUTHENTICATION User authentication restricts the use of the machine to users that have been registered. The functions that each user is allowed to use can be specified, allowing the machine to be customized to meet the needs of your workplace. When the administrator of the machine has enabled user authentication, each user must log in to use the machine.
Page 60
BEFORE USING THE MACHINE Touch the [OK] key. User Authentication After the entered user number is authenticated, the user count screen will appear briefly. Usage status : used/remaining pages Black-white : 87,654,321/12,345,678 Full colour : 87,654,321/12,345,678 2-colour : 87,654,321/12,345,678 Single colour: 87,654,321/12,345,678 Admin Login When page limits have been set in "Pages Limit Group List"...
BEFORE USING THE MACHINE AUTHENTICATION BY LOGIN NAME / PASSWORD The following procedure is used to log in using a login name and password received from the administrator of the machine or the administrator of the LDAP server. User Authentication Login Name User Name Password...
Page 62
BEFORE USING THE MACHINE Touch the [Password] key. User Authentication A text entry screen for entering the password will appear. Enter your password that is stored in "User List" in the system Login Name settings (administrator). User Name User 0001 Password If you are logging in to a LDAP server, enter the password that Auth to:...
Page 63
BEFORE USING THE MACHINE Touch the [OK] key. User Authentication After the entered login name and password are authenticated, the user count screen will appear briefly. Login Name User Name User 0001 Usage status : used/remaining pages Password Black-white : 87,654,321/12,345,678 Full colour : 87,654,321/12,345,678 Auth to: Login Locally...
Application Keys It is possible to display a combined total of eight Sharp OSA application shortcuts and my menu shortcuts. Shortcuts to functions can be registered as keys in the my menu screen. When a shortcut key is touched, the screen for that function appears.
BEFORE USING THE MACHINE REMOTE OPERATION OF THE MACHINE The remote operation function allows you to operate the machine from your computer. When this function is added, the same screen as the operation panel screen appears on your computer. This allows you to operate the machine from your computer in the same way as if you were standing in front of the machine.
BEFORE USING THE MACHINE ITEMS RECORDED IN THE JOB LOG The machine records the jobs that are performed in the job log. The items recorded in the Job Log can be viewed by using "Job Log" - "View Job Log" in the Web page. The main information that is recorded in the job log is described below.
Page 67
BEFORE USING THE MACHINE Item name Description Main items Number of Reserved Number of specified sets or reserved destinations. Sets Number of Completed Number of completed sets or number of destinations to which Sets transmission was successfully completed. Number of Reserved Number of reserved original pages of a copy, print, scan job, or other Pages job.
Page 68
BEFORE USING THE MACHINE Item name Description Detailed Items Original Size Size of scanned original.* For a document filing print job, the paper size of the file. Original Type Original type (text, printed photo, etc.) set in the exposure settings screen.
Plain paper that can be used • SHARP standard plain paper (80 g/m (21 lbs.)). For paper specifications, see the specifications in the Start Guide. • Plain paper other than SHARP standard paper (60 g/m to 105 g/m (16 lbs. to 28 lbs.)) Recycled paper, coloured paper and pre-punched paper must meet the same specifications as plain paper.
Page 70
BEFORE USING THE MACHINE Types of paper that can be used in each tray The following types of paper can be loaded in each tray. " " in the table indicates "cannot be used". – Tray 1/Tray 2/Tray 3/Tray 4 Bypass tray Plain paper Permitted...
• The image quality and toner fusibility of paper may change due to ambient conditions, operating conditions, and paper characteristics, resulting in image quality inferior to that of SHARP standard paper. Contact your dealer or nearest authorised service representative for advice on using these types of paper.
BEFORE USING THE MACHINE TRAY SETTINGS FOR TRAY 1 TO 4 LOADING PAPER AND CHANGING THE PAPER SIZE A maximum of 500 sheets of paper from A5 to A4 (size 5-1/2" x 8-1/2" to size 8-1/2" x 14") can be loaded in trays 1 and 2. A maximum of 500 sheets of paper from B5 to A4 (size 7-1/4"...
Page 73
BEFORE USING THE MACHINE Insert the paper into the tray. Load the paper with the print side face up. The stack must not be higher than the indicator line (maximum of 500 sheets). Indicator line • If paper is loaded higher than the line, paper misfeeds may occur. •...
Paper capacity 500 sheets (80 g/m (21 lbs.)) x 1 tray Paper types SHARP-recommended plain paper, recycled paper, and coloured paper When "Auto-AB" detection is selected: Automatic paper size A4, B5, A5*, 216 mm x 330 mm (8-1/2" x 13") detection When "Auto-Inch"...
BEFORE USING THE MACHINE LOADING PAPER IN THE BYPASS TRAY The bypass tray can be used to print on plain paper, envelopes, label sheets, and other special media. Up to 100 sheets of paper can be loaded (up to 40 sheets of heavy paper) for continuous printing similar to the other trays. Open the bypass tray.
IMPORTANT POINTS WHEN USING THE BYPASS TRAY • When using plain paper other than SHARP standard paper or special media other than SHARP-recommended transparency film, or when printing on the reverse side of previously used paper, the paper must be loaded one sheet at a time.
BEFORE USING THE MACHINE Loading envelopes When inserting envelopes in the bypass tray, place them aligned to the left side in the orientation shown below. Only the front side of envelopes can be printed on. Be sure to place the front side face down. When loading envelopes, load one envelope at a time.
BEFORE USING THE MACHINE ORIGINALS This section explains how to place originals in the automatic document feeder and on the document glass. PLACING THE ORIGINAL PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER This section explains how to place originals in the automatic document feeder. Allowed original sizes Minimum original size Maximum original size...
Page 79
BEFORE USING THE MACHINE Useable card specification Please use cards that conform to ISO 7810 ID-1/ID-2 types. ID-1 ID-2 54 mm (height) x 86 mm (width) 74 mm (height) x 105 mm (width) Size (2-1/8" (height) x 3-3/8" (width)) (3" (height) x 4-1/4" (width)) Thickness 0.76 mm (1/32") ±...
Page 80
BEFORE USING THE MACHINE Place the originals. Make sure the edges of the originals are even. Indicator Insert the originals face up all the way into the document feeder line tray. Insert a number of originals that does not exceed the indicator line on the document feeder tray.
BEFORE USING THE MACHINE PLACING THE ORIGINAL ON THE DOCUMENT GLASS This section explains how to place the original on the document glass. Allowed original sizes When the original is a non-standard size, see the Maximum original size appropriate explanation below for the mode you are using.
Page 82
BEFORE USING THE MACHINE Placing a thick book When scanning a thick book or other thick original, follow the steps below to press the book down. (1) Slightly lift the left and right sides of the automatic document feeder. The automatic document feeder will rise. (2) Slowly close the automatic document feeder.
BEFORE USING THE MACHINE PERIPHERAL DEVICES This section describes the peripheral devices that can be used with the machine and explains how to use the finisher. PERIPHERAL DEVICES Peripheral devices can be installed on the machine to increase its range of functionality. The peripheral devices are generally optional, however, some models include certain peripheral devices as standard equipment.
BEFORE USING THE MACHINE FINISHER The finisher is equipped with the offset function, which offsets each set of output from the previous set. In addition, each set of sorted output can be stapled. PART NAMES The following parts can be accessed when the finisher is open. Output tray Front cover Stapled and offset output is delivered to this tray.
BEFORE USING THE MACHINE FINISHER SPECIFICATIONS Model MX-FN12 A4, B5, A5, 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", Paper sizes 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", envelopes, 16K Thin paper (55 g/m to 59 g/m (15 lbs.
Sharp OSA (Open Systems Architecture) is an architecture that enables external applications to be directly connected to a digital multifunction machine over a network. When a digital multifunction machine that supports Sharp OSA is used, the operation panel controls and functions of the machine such as scan send can be linked to an external application.
The two modes for using an external account application operate as explained below. External authentication mode When the [Enable Authentication by External Server] checkbox is selected in "External Account Setting" of "Sharp OSA Settings" in the system settings (administrator), the machine enters external authentication mode. When the machine is powered on in external authentication mode, the machine accesses the external account application and displays the login screen.
Page 88
OFF" (page 1-15). External count mode When only the [External Account Control] setting is enabled in "External Account Setting" of "Sharp OSA Settings" in the system settings (administrator), the machine enters external count mode. Unlike external authentication mode, when the machine is started in "external count mode", the login screen of the external account application is not displayed.
BEFORE USING THE MACHINE REPLACING SUPPLIES AND MAINTENANCE This section explains the procedures for replacing supplies such as toner and staple cartridges and routine maintenance. REPLACING THE TONER CARTRIDGES Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears. In copy mode Ready to scan for copy.
Page 90
BEFORE USING THE MACHINE Pull the toner cartridge toward you. Example: Replacing the yellow toner cartridge Take out the new toner cartridge, hold it Protective with both hands, and shake 5 or 6 times material horizontally. • When shaking the toner cartridge, be sure to shake with the protective material inserted in the cartridge. If you shake the cartridge after removing the protective material, toner may spill out.
Page 91
• If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality and performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.
BEFORE USING THE MACHINE REPLACING THE TONER COLLECTION CONTAINER The toner collection container collects excess toner that is produced during printing. When the toner collection container becomes full, "Replace used toner container." will appear. Follow the procedure below to replace the toner collection container.
Page 93
BEFORE USING THE MACHINE Remove the toner collection container. • If the toner collection container is tipped forward too far, it will not be possible to remove it. • Do not point the holes down as used toner will spill out. •...
Page 94
BEFORE USING THE MACHINE • Toner may spill when the toner collection container is replaced. Take measures so that there will be no problem if toner spills on the machine, around the machine, or on your clothes. • Do not touch the part soiled with toner of the removed toner collection container. If you accidentally touch the toner, immediately wash your hands.
BEFORE USING THE MACHINE REPLACING THE DEVELOPER CARTRIDGE / DRUM CARTRIDGE Before replacing the developer cartridge or drum cartridge, turn off the main power of the machine and wait briefly. REPLACING THE DEVELOPER CARTRIDGE Your service technician will replace the developer cartridge. Only replace the cartridge as explained below if your service technician instructs you to.
Page 96
BEFORE USING THE MACHINE Remove the developer cartridge. (1) Grasp the developer cartridge lock and pull it forward and down. (2) Squeeze the lever on the developer cartridge (3) Pull the developer cartridge out horizontally. (4) Support the developer cartridge near the middle with your hand and completely Roller remove the developer cartridge.
Page 97
BEFORE USING THE MACHINE Insert the new developer cartridge horizontally. Insert the new developer cartridge in the same location as the cartridge that was removed. • Do not tilt the developer cartridge or insert it in the wrong direction or orientation. This may damage the developer cartridge or drum cartridge and cause failure.
Page 98
BEFORE USING THE MACHINE Close the main charger cover and rotate the lock levers in the direction of the arrows to lock the cover. When the lock levers are vertical, the cover is locked. Install the toner collection container. ☞ REPLACING THE TONER COLLECTION CONTAINER (page 1-50) Close the front cover.
BEFORE USING THE MACHINE REPLACING THE DRUM CARTRIDGE Your service technician will replace the drum cartridge. Only replace the cartridge as explained below if your service technician instructs you to. Follow the instructions carefully. • Do not leave the drum cartridge outside of its package for a long time, and do not remove cartridge from its package in a location where there is bright sunlight or bright light.
Page 100
BEFORE USING THE MACHINE Remove the protective material from the drum cartridge and slowly insert the drum cartridge along the guides. Make sure that the mark on the drum cartridge is aligned with the mark on the machine as you insert the drum cartridge.
BEFORE USING THE MACHINE REPLACING THE STAPLE CARTRIDGE IN THE FINISHER When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below to replace the staple cartridge. Open the cover. While pressing the lever over to the left, slide the finisher to the left until it stops.
BEFORE USING THE MACHINE Insert a new staple cartridge into the staple case as shown. Push the staple cartridge in until it clicks into place. Replace the staple case. Push the staple case in until it clicks into place. Slide the finisher back to the right. Gently slide the finisher back to the right until it locks into its original position.
BEFORE USING THE MACHINE REGULAR MAINTENANCE To ensure that the machine continues to provide top quality performance, periodically clean the machine. Warning Do not use a flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical components or the fusing unit inside the machine, fire or electrical shock may result.
BEFORE USING THE MACHINE CLEANING THE DOCUMENT GLASS AND AUTOMATIC DOCUMENT FEEDER If the document glass or document backplate sheet becomes dirty, the dirt will appear as dirty spots, coloured lines, or white lines in the scanned image. Always keep these parts clean. Wipe the parts with a clean, soft cloth.
BEFORE USING THE MACHINE CLEANING THE MAIN CHARGER OF THE PHOTOCONDUCTIVE DRUM If black lines or coloured lines appear even after you have cleaned the document glass and automatic document feeder, use the charger cleaner to clean the main charger. Press the [POWER] key ( ) on the operation panel to turn off the panel...
Page 106
BEFORE USING THE MACHINE Clean the main charger. (1) Gently push the charger cleaner all the way (2) Gently pull the charger cleaner out. (3) Repeat the above (1) to (2) three times. • Take care not to let the tip of the charger cleaner become soiled by toner. •...
Page 107
BEFORE USING THE MACHINE Install the toner collection container. ☞ REPLACING THE TONER COLLECTION CONTAINER (page 1-50) Close the front cover. Take care that your fingers are not pinched when closing the cover. Turn on the power. Switch the main power switch "ON" and press the [POWER] key ( ) on the operation panel to turn on the operation panel power.
BEFORE USING THE MACHINE CLEANING THE BYPASS TRAY ROLLERS If you find that paper fed from the bypass tray misfeeds or is soiled by the roller, remove and clean the roller. If misfeeds or soiling continue to occur, replace the roller. Before starting, remove the paper from the bypass tray.
Page 109
BEFORE USING THE MACHINE Turn on the power. Switch the main power switch "ON" and press the [POWER] key ( ) on the operation panel to turn on the operation panel power. 1-67 Contents...
BEFORE USING THE MACHINE CLEANING THE AUTOMATIC DOCUMENT FEEDER ROLLERS If you find that originals fed through the automatic document feeder misfeed or are soiled by the rollers, remove the rollers and clean them. If misfeeds or soiling continue to occur, replace the rollers. Before starting, remove any originals from the automatic document feeder.
Page 111
BEFORE USING THE MACHINE Close the document conveyor cover on the automatic document feeder. Take care that your fingers are not pinched when closing the cover. Turn on the power. Switch the main power switch "ON" and press the [POWER] key ( ) on the operation panel to turn on the operation panel power.
BEFORE USING THE MACHINE CLEANING THE LASER UNIT When the laser unit inside the machine becomes dirty, line patterns (coloured lines) may form in the printed image. Follow the steps below to clean the laser unit. Identifying lines (coloured lines) caused by a dirty laser unit •...
Page 113
BEFORE USING THE MACHINE Make sure that the cleaner at the tip of the cleaning tool is not dirty. Cleaner If the cleaner is dirty, remove the cleaner and replace it with a clean one. For the procedure for replacing the cleaner, see steps 5 through 7.
BEFORE USING THE MACHINE Clean the laser unit. (1) Point the cleaner down and slowly insert the tool into the hole that you wish to clean. The parts of the writing unit that require cleaning are indicated by labels similar to (A). (2) Insert the cleaning tool all the way into the hole and then pull it back out.
Page 115
BEFORE USING THE MACHINE Install the toner collection container. ☞ REPLACING THE TONER COLLECTION CONTAINER (page 1-50) Close the front cover. Take care that your fingers are not pinched when closing the cover. Turn on the power. Switch the main power switch "ON" and press the [POWER] key ( ) on the operation panel to turn on the operation panel power.
BEFORE USING THE MACHINE CLEANING THE PT CHARGER OF THE PRIMARY TRANSFER BELT UNIT If black or coloured lines still remain after the document glass / automatic document feeder and main charger have been cleaned, use the PT charger cleaner to clean the PT charger. Press the [POWER] key ( ) on the operation panel to turn off the panel...
Page 117
BEFORE USING THE MACHINE Close the front cover. Take care that your fingers are not pinched when closing the cover. Turn on the power. Switch the main power switch "ON" and press the [POWER] key ( ) on the operation panel to turn on the operation panel power.
BEFORE USING THE MACHINE ENTERING TEXT This section explains the text entry screen. FUNCTIONS OF THE MAIN KEYS Description This key changes the text entry screen from the lower case screen to the upper case screen. The upper Caps case screen will continue to appear until the [Caps] key is touched again so that it is no longer highlighted. The [Caps] key is convenient when you wish to enter all capital letters.
Page 119
BEFORE USING THE MACHINE Description Shows explanations of each key. Help Use this key to enter a previously stored text string such as ".com". .com .net .org Text strings are stored in "Soft Keyboard Template Setting" in "Operation Setting" in the "System Settings" .biz .info http: on the Web page.
BEFORE USING THE MACHINE ENTERING TEXT FROM A KEYBOARD A keyboard can only be used as a alternative for the text entry screen that appears in the machine's touch panel. The layout of the keys in the text entry screen in the touch panel differs slightly from the layout of the keys on the keyboard.
BEFORE USING THE MACHINE SOFTWARE SETUP BEFORE INSTALLING THE SOFTWARE For an introduction to the software that enables the use of the printer and scanner functions, details regarding the type of CD-ROM that contains the software, and installation instructions, see "BEFORE INSTALLING THE SOFTWARE" in the Start Guide.
BEFORE USING THE MACHINE SETUP IN A WINDOWS ENVIRONMENT This section explains how to install the software and configure settings so that the printer and scanner function of the machine can be used with a Windows computer. The section from this page to page 1-84 is also included in the Start Guide. (This section details basic setup procedures.) The instructions from page 1-85 to page 1-105 are not included in the Start Guide.
BEFORE USING THE MACHINE The software selection screen appears. The software selection screen appears. Before installing the software, be sure to click the [Display Readme] button and view the detailed information on the software. * The above screen appears when using the "Disc 1" CD-ROM.
Page 124
BEFORE USING THE MACHINE Standard installation When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR SOFTWARE)" (page 1-80), perform the steps below. Click the [Printer Driver] button. To install the PC-Fax driver, click the [PC-Fax Driver] button on the "Disc 2"...
Page 125
BEFORE USING THE MACHINE Printers connected to the network are detected. Select the machine and click the [Next] button. • If the machine is not found, make sure that the machine is powered on and that the machine is connected to the network, and then click the [Re-search] button.
Page 126
BEFORE USING THE MACHINE Follow the on-screen instructions. Read the message in the window that appears and click the [Next] button. Installation begins. • If you are using Windows Vista/Server 2008/7 If a security warning window appears, be sure to click [Install this driver software anyway]. •...
Page 127
BEFORE USING THE MACHINE Installation by specifying the machine's address When the machine cannot be found because it is not powered on or otherwise, installation is possible by entering the name (host name) or IP address of the machine. If the machine is being used on an IPv6 network, after you have installed the software as explained below, change the port as explained in "...
Page 128
BEFORE USING THE MACHINE Enter the name (host name) or IP address of the machine and click the [Next] button. ☞ Start Guide "Checking the IP address of the machine" If the machine is being used on an IPv6 network, enter any numbers or characters. When the model selection window appears, select the model name of your machine and click the [Next] button.
Page 129
BEFORE USING THE MACHINE Follow the on-screen instructions. Read the message in the window that appears and click the [Next] button. Installation begins. • If you are using Windows Vista/Server 2008/7 If a security warning window appears, be sure to click [Install this driver software anyway]. •...
Page 130
BEFORE USING THE MACHINE Printing using the IPP function and the SSL function The IPP function can be used to print to the machine over a network using HTTP protocol. The IPP function can also be used in combination with the SSL (encrypted communication) function to encrypt the print data.
Page 131
BEFORE USING THE MACHINE If a proxy server is used, specify the proxy server and click the [Next] button. To specify a proxy server, select [Print via the proxy server] and then enter the [Address] and [Port number]. Enter the machine's URL and click the [Next] button.
Page 132
BEFORE USING THE MACHINE WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE • Make sure that a USB cable is not connected to your computer and the machine. If a cable is connected, a Plug and Play window will appear. If this happens, click the [Cancel] button to close the window and disconnect the cable.
Page 133
BEFORE USING THE MACHINE When you are asked if you wish to install the display fonts, select an answer and click the [Next] button. Follow the on-screen instructions. Read the message in the window that appears and click the [Next] button. When the installation completed screen appears, click the [OK] button.
Page 134
BEFORE USING THE MACHINE When installing the PCL5c printer driver, PS printer driver, PPD driver, or PC-Fax driver Installation is possible even after the USB cable has been connected. When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)"...
Page 135
BEFORE USING THE MACHINE When the printer driver selection window appears, remove the [PCL6] checkmark and select the printer driver to be installed, and then click the [Next] button. Click the checkbox of the printer driver to be installed so that a checkmark ( ) appears.
Page 136
BEFORE USING THE MACHINE USING THE MACHINE AS A SHARED PRINTER If you are going to use the machine as a shared printer on a Windows network with the printer driver or the PC-Fax driver installed on a print server, follow the steps below to install the printer driver or the PC-Fax driver on the client computers.
Page 137
BEFORE USING THE MACHINE Select the printer name (configured as a shared printer). (1) Select the printer name (configured as a shared printer on a print server) from the list. If you are using Windows 2000/XP/Server 2003, you can also click the [Add Network Port] button displayed below the list and select the printer to be shared by browsing the network in the window that appears.
Page 138
BEFORE USING THE MACHINE CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE After installing the printer driver, you must configure the printer driver settings appropriately for the options that have been installed and the size and type of paper loaded in the machine. Follow the steps below to configure the printer driver.
Page 139
BEFORE USING THE MACHINE Configure the image of the machine. An image of the machine is formed in the printer driver configuration window based on the options that are installed. (1) Select the options that are installed on the machine. (2) Click the [OK] button.
Page 140
BEFORE USING THE MACHINE When the PPD driver is installed Click the [Start] button ( ), click [Control Panel], and then click [Printer]. • In Windows XP/Server 2003, click the [start] button and then click [Printers and Faxes]. • In Windows 2000, click the [Start] button, select [Settings], and then click [Printers]. If [Printers and Faxes] does not appear in the [start] menu in Windows XP, click the [start] button, click [Control Panel], click [Printers and Other Hardware], and then click [Printers and Faxes].
For the procedures for using the Printer Status Monitor, see the Help file. Follow these steps to view the Help file: Click the Windows [start] button, select [All Programs] ([Programs] in Windows 2000), select [SHARP Printer Status Monitor] and then select [Help].
When the scanner driver is installed, the "Select Device" utility is also installed. The IP address of the machine is configured in the scanner driver using "Select Device". Click the [start] button, select [All Programs] ([Programs] in Windows 2000), select [SHARP MFP TWAIN V], and then select [Select Device]. 1-100 Contents...
Page 143
BEFORE USING THE MACHINE Click the [Search] button. If you know the IP address, you can click the [Input] key and enter the IP address without searching. Select the IP address of the machine from the "Address" menu and click the [OK] button.
BEFORE USING THE MACHINE CHANGING THE PORT When using the machine in a Windows environment, follow the steps below to change the port when you have changed the IP address of the machine or have installed the PC-Fax driver when the machine is connected with a USB cable. If the machine is being used on an IPv6 network, follow the steps 1 to 3 below and see "Changing to a Standard TCP/IP Port"...
Page 145
BEFORE USING THE MACHINE Select [SC2 TCP/IP Port] and then click the [New Port] button. • The "SC2 TCP/IP Port" is added when the printer driver is installed using a "Standard installation", or a "Custom installation" with "LPR Direct Print (Specify Address/Auto Search)" selected. •...
Page 146
BEFORE USING THE MACHINE Changing to a Standard TCP/IP Port If the machine is being used on an IPv6 network, change the port to a port created using the operating system's "Standard TCP/IP Port". Follow steps 1 to 3 of "CHANGING THE PORT"...
Page 147
BEFORE USING THE MACHINE Configure the port settings. (1) Select [LPR]. (2) Enter [lp]. (3) Click the [OK] button. Click the [Next] button in the screen of step 5. Click the [Finish] button. Click the [Close] button in the screen of step 2. When using a port created with "Standard TCP/IP Port"...
BEFORE USING THE MACHINE SETUP IN A MACINTOSH ENVIRONMENT This chapter explains how to install the PPD file to enable printing from a Macintosh and how to configure the printer driver settings. ☞ MAC OS X: this page (v10.2.8, v10.3.9, v10.4.11, v10.5 - 10.5.8, v10.6 - 10.6.2) ☞...
Page 149
BEFORE USING THE MACHINE Click the [Continue] button. The Licence Agreement window will appear. Make sure that you understand the contents of the licence agreement and then click the [Continue] button. A message will appear asking you if you agree to the terms of the licence. Click the [Agree] button. If the licence appears in the different language, change the language in the language menu.
Page 150
BEFORE USING THE MACHINE Select [Utilities] from the [Go] menu. • If you are using Mac OS X v10.5 to 10.5.8 or v10.6 - 10.6.2, click [System Preferences] in the Apple menu ( ) and select [Print & Fax] ( ).
Page 151
(3) Select the PPD file of the machine. • If you are using Mac OS X v10.3.9, select [Auto Select]. • If you are using Mac OS X v10.2.8, select [Sharp] and click the PPD file of your model. (4) Click the [Add] button.
Page 152
BEFORE USING THE MACHINE Display printer information. (1) Click the machine's name. If you are using Mac OS X v10.5 to 10.5.8 or v10.6 - 10.6.2, click the [Options & Supplies] button, click the [Driver] tab and go to step 16. (2) Click [Show Info].
Page 153
(IP address or domain name) and the queue name. Enter "ipp" in "Queue". (3) Select [Sharp] in "Print Using" and click the PPD file of your model. If you are using Mac OS X v 10.5 to 10.5.8 or v10.6 - 10.6.2, select [Select a driver to use] (or [Select Printer...
Page 154
BEFORE USING THE MACHINE MAC OS 9.0 - 9.2.2 • If you are using Mac OS 9.0 to 9.2.2, make sure that "LaserWriter 8" has been installed and that the "LaserWriter 8" checkbox is selected in "Extensions Manager" in "Control Panels". If not, install it from the system CD-ROM supplied with your Macintosh computer.
Page 155
BEFORE USING THE MACHINE Create a printer. (1) Click the [LaserWriter 8] icon. If multiple AppleTalk zones are displayed, select the zone that includes the printer. (2) Click the machine's model name. The machine's model name usually appears as [SCxxxxxx]. ("xxxxxx" is a sequence of characters that varies depending on your model.) (3) Click the [Create] button.
Page 156
BEFORE USING THE MACHINE Select the machine configuration. (1) Select the options that are installed on the machine. (2) Select [Options 2] from the menu to change the screen and continue selecting the options that have been installed on the machine. (3) Click the [OK] button.
BEFORE USING THE MACHINE REMOVING THE SOFTWARE To remove the printer driver or software installed using the installer, follow the steps below. Windows Click the [start] button and then click [Control Panel]. In Windows 2000, click the [Start] button, point to [Settings], and click [Control Panel]. Click [Uninstall a program].
Page 158
BEFORE USING THE MACHINE Double-click the [MacOS] folder. Double-click the [Installer] icon ( Select [Remove] in the Install menu and click the [Remove] button. 1-116 Contents...
Page 159
CHAPTER 2 COPIER This chapter provides detailed explanations of the procedures for using the copy function. OUTPUT ....... . . 2-35 BEFORE USING THE MACHINE AS A •...
Page 160
COPIER [Image Edit] KEY ......2-76 CONVENIENT COPY FUNCTIONS • REPEATING PHOTOS ON A COPY INTERRUPTING A COPY RUN (Interrupt (Photo Repeat) .
COPIER BEFORE USING THE MACHINE AS A COPIER This section provides information that you should know before using the machine as a copier. BASE SCREEN OF COPY MODE Touch the [COPY] key in the touch panel to open the base screen of copy mode. The base screen shows messages and keys necessary for copying, and settings that have been selected.
Page 162
COPIER Paper size display (14) Customized keys This shows the size of paper loaded in each tray. The keys that appear here can be changed to show For the bypass tray, the paper type appears above the settings or functions that you prefer. The following keys paper size.
Page 163
COPIER Customizing displayed keys Special mode keys and other keys can be displayed in the base screen. By assigning frequently used functions to these keys, you can access the functions with a single touch. To change the function that is assigned to a key, use "Customize Key Setting"...
COPIER COPYING SEQUENCE This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy operation takes place smoothly. For detailed procedures for selecting the settings, see the explanation of each setting in this chapter. Place the original.
COPIER Output settings Select copy output settings. Output The main settings are as follows: ☞ • Sort mode Sort mode (page 2-36) ☞ • Group mode Group mode (page 2-36) Offset ☞ • Offset mode Offset function (page 2-36) • Staple sort mode ☞...
Page 166
COPIER • When one or more special modes are selected, the key appears in the base screen. Touch the key to display a list of the selected special modes. This lets you check what special modes are selected and the settings of each mode. ☞...
COPIER ORIGINALS STANDARD ORIGINAL PLACEMENT ORIENTATIONS Place the original so that the top and bottom edges are oriented as shown below. For more information on placing the original, see "ORIGINALS" 1-36 in "1. BEFORE USING THE MACHINE". (page Document feeder tray Document glass Place the original face down in the...
COPIER PAPER TRAYS The machine is set to automatically select a tray that has the same size of paper as the size of the placed original (automatic paper tray selection). If the correct paper size is not selected or you wish to change the paper size, you can select the paper tray manually. Touch the [Paper Select] key.
COPIER BASIC PROCEDURE FOR MAKING COPIES This section explains the basic procedures for making copies, including selection of the copy ratio and other copy settings. MAKING COPIES USING THE AUTOMATIC DOCUMENT FEEDER TO MAKE COPIES This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder. Place the originals face up in the document feeder tray with the edges Indicator...
Page 170
COPIER Specify the original size. (1) Touch the original output destination. Original Original Exit Upper Exit Heavy Exit (2) Touch the appropriate original size key. Place (3) Touch the [OK] key. 216x330 216x340 Check Size Inch 216x343 Card Size Size Input Custom Size None When placing an AB (inch) size or non-standard size original, specify the original size as explained in...
COPIER USING THE DOCUMENT GLASS TO MAKE COPIES To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the automatic document feeder and place the original on the document glass. This section explains how to make a copy (1-sided copy of a 1-sided original) using the document glass.
Page 172
COPIER Specify the original size. (1) Touch the appropriate original size key. Original Original Exit Upper Exit Heavy Exit (2) Touch the [OK] key. Place Original Size 216x330 216x340 Check Size Inch 216x343 Card Size Custom Size None Size Input When placing an AB (inch) size or non-standard size original, specify the original size as explained in "ORIGINAL SIZES"...
Page 173
COPIER Remove the original and place the next original, and then press the [COLOUR START] key or the [BLACK & WHITE START] key. Repeat this step until all originals have been scanned. For the second original and following originals, use the same [START] key as you did for the first original. Touch the [Read-End] key.
COPIER AUTOMATIC 2-SIDED COPYING USING THE AUTOMATIC DOCUMENT FEEDER TO MAKE 2-SIDED COPIES Originals Copies Originals Originals Copies Copies Automatic 2-sided copying of 1-sided Automatic 2-sided copying of 2-sided 1-sided copying of 2-sided originals originals originals Place the originals face up in the document feeder tray with the edges Indicator aligned evenly.
Page 175
COPIER Specify the original size. (1) Touch the original output destination. Original Original Exit Upper Exit Heavy Exit (2) Touch the appropriate original size key. Place (3) Touch the [OK] key. 216x330 216x340 Check Size Inch 216x343 Card Size Size Input Custom Size None When placing an AB (inch) size or non-standard size original, specify the original size as explained in...
Page 176
COPIER Check the paper to be used and the Colour Mode Special Modes colour mode. Full Colour 2-Sided Copy Plain Make sure that the desired paper (tray) and colour mode are Output Exposure selected. Auto File • To change the paper (tray), touch the [Paper Select] key. ☞...
COPIER USING THE DOCUMENT GLASS TO MAKE 2-SIDED COPIES Originals Copies Automatic 2-sided copying of 1-sided originals Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder. Document glass scale mark Portrait original Align the top edge of the...
Page 178
COPIER Specify the original size. (1) Touch the appropriate original size key. Original Original Exit Upper Exit Heavy Exit (2) Touch the [OK] key. Place Original Size 216x330 216x340 Check Size Inch 216x343 Card Size Custom Size None Size Input When placing an AB (inch) size or non-standard size original, specify the original size as explained in "ORIGINAL SIZES"...
Page 179
COPIER Check the paper to be used and the Colour Mode Special Modes colour mode. Full Colour 2-Sided Copy Plain Make sure that the desired paper (tray) and colour mode are Output selected. Exposure Auto File • To change the paper (tray), touch the [Paper Select] key. ☞...
COPIER COLOUR COPY MODES The colour mode of the [COLOUR START] key is normally set to [Full Colour] so that copying takes place in full colour mode when the [COLOUR START] key is pressed. If colour originals are mixed together with black & white originals, set the colour mode to [Auto] to have the colour mode change appropriately for each original.
Page 181
COPIER Selecting single colour copying When [Single Colour] is selected for the colour mode, the following screen appears. Touch the desired colour and touch the [OK] key. Colour Mode Single Colour R(Red) G(Green) B(Blue) C(Cyan) M(Magenta) Y(Yellow) Selecting 2 colour copying When [2 Colour] is selected for the colour mode, the following screen appears.
COPIER CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE The exposure and original image type can be selected to obtain a clear copy. AUTOMATIC ADJUSTMENT OF THE EXPOSURE AND ORIGINAL TYPE Automatic exposure adjustment operates by default to automatically adjust the exposure level and original type as appropriate for the original being copied.
Page 183
COPIER Adjust the exposure level. Exposure Touch the key to make the copy darker. Auto Touch the key to make the copy lighter. Manual Original Image Type • Using a copy or printed page as an original Text/ Text/Photo Text When using a copy or printed page from the machine as an Prtd.Photo Printed...
COPIER REDUCTION/ENLARGEMENT/ZOOM AUTOMATIC RATIO SELECTION (Auto Image) This section explains the automatic ratio selection function (Auto Image), which automatically selects the ratio to match the paper size. When the paper tray is manually changed, the [Auto Image] key appears in the base screen of copy mode. Touch the [Auto Image] key to have the reduction or enlargement ratio automatically selected based on the original size and the selected paper size.
COPIER MANUAL RATIO SELECTION (Preset ratios/Zoom) Touch the [Copy Ratio] key in the base screen of copy mode to select one of two preset enlargement ratios or three preset reduction ratios (maximum 200%, minimum 50%). In addition, the zoom keys can be used to select any ratio from 50% to 200% in increments of 1%. Set the ratio.
Page 186
COPIER Touch the [OK] key. Copy Ratio After touching the [OK] key, make sure that a paper size suitable for the ratio is selected. 115% Zoom 122% 141% 100% Auto Image XY Zoom When the automatic document feeder is used, the vertical and horizontal ratio selection ranges are both 50% to 200%. To return the ratio to 100%...
COPIER ENLARGING/REDUCING THE LENGTH AND WIDTH SEPARATELY (XY Zoom) The XY Zoom feature allows the horizontal and vertical copy ratios to be changed separately. Both the horizontal and vertical ratios can be set from 50% to 200% in increments of 1%. Touch the [Copy Ratio] key in the base screen of copy mode and then follow the steps below.
COPIER ORIGINAL SIZES SPECIFYING THE ORIGINAL SIZE The original size is set in "Default original size setting" in the system settings (administrator), and the setting appears in the [Original] key. This section explains the procedure for specifying the setting when the original size is different from size shown in the [Original] key.
Page 189
COPIER Specifying a non-standard original size Touch the [Size Input] key. Original Original Exit Upper Exit Heavy Exit Place 216x330 216x340 Check Size Inch 216x343 Card Size Custom Size None Size Input Enter the original size. (1) Enter the X (horizontal) dimension of the Original original.
COPIER STORING FREQUENTLY USED ORIGINAL SIZES You can save special original sizes that you frequently use. This section explains how to store, retrieve, change, and delete special original sizes. Storing original sizes (editing/clearing) Up to 12 special original sizes can be stored. Touch the [Original] key in the base screen of copy mode and then follow the steps below.
Page 191
COPIER Enter the original size. (1) Enter the X (horizontal) dimension of the Original original. Cancel Size Input Touch the X (width) numeric value display key to open a number entry screen. Enter the width of the original with (25~356) the numeric keys, and touch the [OK] key in the number (25~216) entry screen.
Page 192
COPIER Retrieving a stored original size To retrieve a stored original size, touch the [Original] key in the base screen of copy mode and perform the steps below. Touch the [Custom Size] key. Original Original Exit Upper Exit Heavy Exit Place 216x330 216x340...
COPIER OUTPUT To select output functions and the output tray, touch the [Output] key in the base screen of copy mode. Output functions that can be selected are sort, group, offset, and staple sort. All explanations of the settings below assume that a finisher is installed.
COPIER OUTPUT MODES This section explains the output modes. Sort mode Group mode This is used to sort (collate) output into sets. This function groups copies by page. Example: Sorting the output into 5 sets Example: Groups of 5 copies of each page Originals Output Originals...
Page 195
COPIER Staple sort function The staple sort function sorts output into sets, staples each set, and delivers the sets to the tray. The relations between the stapling positions, paper orientation, permitted paper sizes for stapling, and number of sheets that can be stapled are shown below. For original placement orientations, see "Original placement orientation"...
COPIER MAKING COPIES USING THE BYPASS TRAY In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special media. For detailed information on paper that can be loaded in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER"...
Page 197
COPIER Check the paper type setting for the Paper Select bypass tray. If you need to change the Paper Tray Bypass Tray setting, touch the paper type key. Plain If you do not need to change the paper size and type that Plain 2.
Page 198
COPIER Select the bypass tray. (1) Touch the paper size key of the bypass tray. Paper Select (2) Touch the [OK] key. Paper Tray Bypass Tray Plain Plain 2. A5 Plain 3. A4 Plain 4. A4 Plain Press the [COLOUR START] key or the [BLACK & WHITE START] key. Scanning begins.
COPIER SPECIAL MODES This section explains Margin Shift, Erase, and other special modes. SPECIAL MODES When the [Special Modes] key is pressed in the base screen, the special modes menu screen appears. The special modes menu consists of two screens. Touch the keys to move between the screens.
Page 200
COPIER Special modes menu (2nd screen) Special Modes Original Mixed Size Proof Copy Count Original Slow Scan 8 Business Mode Cards Layout [Proof Copy] key [Slow Scan Mode] key ☞ ☞ CHECKING COPIES BEFORE PRINTING (Proof COPYING THIN ORIGINALS (Slow Scan Mode) Copy) (page 2-96) (page 2-102)
Page 201
COPIER [OK] key and [Cancel] key In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as follows: Special Modes Cancel Margin Shift Down Right Left Side 1 Side 2 (0~20) (0~20) (A) Enter the selected special mode settings and return to the base screen of copy mode.
COPIER ADDING MARGINS (Margin Shift) This function is used to shift the copy image right, left, up or down to adjust the margin. This is convenient when you wish to hole punch the copies. Shifting the image to the right so the copies can be bound at the left edge with a string Not using margin shift Using margin shift The punch holes cut off...
Page 203
COPIER Press the [COLOUR START] key or the [BLACK & WHITE START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
COPIER ERASING PERIPHERAL SHADOWS (Erase) The erase function is used to erase shadows around the edges of copies that occur when copying thick originals or books. When a thick book is copied Not using the erase Using the erase function function Shadows appear here Shadows appear on the...
Page 205
COPIER Select the erase settings. (1) Touch the desired erase mode. Special Modes Select one of the 2 positions. Cancel Erase Touch the [Side Erase] key to open the following screen. Edge Erase Edge Erase Side Erase Cancel (0~20) Erase Position for Original Side 2 Side Erase Left...
COPIER MAKING COPIES IN PAMPHLET FORMAT (Pamphlet Copy) This function copies 2 original pages onto the front side and 2 original pages onto the reverse side of each sheet of paper so that the copies can be folded at the centreline to form a pamphlet. This function is convenient for arranging copies into an attractive booklet or pamphlet.
Page 207
COPIER Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Pamphlet Copy] key. ☞ Special modes menu (1st screen) (page 2-41) Select pamphlet copy settings. Special Modes (1) If the original is 1-sided, touch the [1-Sided] Cancel Pamphlet Copy key.
COPIER COPYING A LARGE NUMBER OF ORIGINALS AT ONCE (Job Build) When copying a very large number of originals, this function allows you to divide the originals into sets and feed each set through the automatic document feeder one set at a time. Use this function when you wish to copy all of the originals as a single job but the number of originals exceeds the maximum number that can be inserted.
Page 209
COPIER Press the [COLOUR START] key or the [BLACK & WHITE START] key to scan the first set of originals. Scanning begins. To cancel scanning... Press the [STOP] key ( Insert the next set of originals and press the [COLOUR START] key or the [BLACK &...
COPIER ADDING INSERTS WHEN COPYING ON TRANSPARENCY FILM (Transparency Inserts) When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the sheets easy to handle.
Page 211
COPIER Select insert settings. (1) Select whether or not the insert paper will Special Modes be copied on ([Yes] or [No]). Cancel Transparency Inserts (2) Touch the [OK] key. Paper Tray Print on Insert Sheets You will return to the base screen of copy mode. Tray1 Explanation of (A) When transparency inserts is selected, paper suitable for...
COPIER COPYING TWO ORIGINAL PAGES ONTO ONE SHEET (2in1) Two original pages can be copied onto one sheet of paper. This function is convenient when you wish to present multiple pages in a compact format, or show a view of all pages in a document. By copying two originals onto one sheet, the amount of paper used can be cut in half.
Page 213
COPIER Select the layout, and the border. (1) Select the layout. Special Modes Select the order in which the originals will be arranged on 2in1 Cancel the copy. Layout Border Layout The arrows in the above diagram indicate how the images are arranged.
COPIER COPYING BOTH SIDES OF A CARD ON ONE SHEET OF PAPER (Card Shot) When copying a card, this function allows you to copy the front and reverse sides together onto a single sheet of paper. This function is convenient for making copies for identification purposes and helps save paper. Copies Originals Front...
Page 215
COPIER Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Card Shot] key. ☞ Special modes menu (1st screen) (page 2-41) Select card shot settings. (1) Enter the original size. Special Modes With the [X] key highlighted, enter the X (horizontal) Card Shot Cancel dimension of the original with the...
Page 216
COPIER Touch the [Read-End] key. Place next original. Press [Start]. Copying will begin. When finished, press [Read-End]. Read-End To cancel copying... Press the [STOP] key ( • Copying is only possible on standard size paper. • XY Zoom cannot be used when using this function. •...
COPIER PRINTING THE DATE AND A STAMP ON COPIES (Stamp) Use this function to print the date, a stamp, the page number, and text on copies. Six printing positions are available: top left, top centre, top right, bottom left, bottom centre, and bottom right. The printing positions are separated into areas that are used for the date, page number and text (A below), and areas that are used for a stamp (B below).
COPIER GENERAL PROCEDURE FOR USING STAMP To select stamp settings, follow the steps below. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. When using this function with a portrait original on the document glass, place the original so that the top of the image is to the right.
Page 219
COPIER Select the print position. Special Modes Select from 6 positions: top left, top centre, top right, bottom Stamp Cancel left, bottom centre, bottom right. You can also skip this step and go directly to the next step. In Date Stamp this case, the stamp items will be printed in the following Page...
Page 220
COPIER Select settings for the original. (1) Touch the [Original Orientation] key and Special Modes specify the orientation of the placed Stamp Cancel original. Original Orientation 2-Sided Original Type If 2-sided originals have been placed, touch the key and specify the binding position (booklet binding or tablet binding) of the originals.
COPIER ADDING THE DATE TO COPIES (Date) The date can be printed on copies. The position of the date, colour, format, and page (first page only or all pages) can be selected. Example: Printing APRIL 4, 2010 in the top right corner of the paper. 04/APR/2010 Touch the [Date] key in the stamp selection screen.
Page 222
COPIER Check the displayed date. If you need to Stamp change the date, touch the [Date Cancel Date Change] key. First Page YYYY/MM/DD Print Colour Set the date that you wish to use and touch the [OK] key. Bk(Black) MM/DD/YYYY All Pages Stamp DD/MM/YYYY...
COPIER STAMPING COPIES (Stamp) Text such as "CONFIDENTIAL" can be printed in white on a dark background as a "stamp" on copies. The position, colour, size, density, and pages (first page only or all pages) can be selected for a stamp. Printing "CONFIDENTIAL"...
Page 224
COPIER Touch the [Print Colour] key and set the Stamp colour and density. Stamp Cancel Touch the colour that you wish to use. CONFIDENTIAL PRIORITY First Page If you wish to darken the selected colour, touch the key. Print Colour FOR YOUR INFO.
COPIER PRINTING PAGE NUMBERS ON COPIES (Page Numbering) Page numbers can be printed on copies. The position, colour, format, and page number can be selected for page numbering. Printing the page number at the bottom centre of the paper. Touch the [Page Numbering] key in the stamp selection screen. See steps 1 to 4 of "GENERAL PROCEDURE FOR USING STAMP"...
Page 226
COPIER Touch the [Print Colour] key. Stamp Touch the colour that you wish to use. Page Numbering Cancel When you have finished selecting the settings, touch the [OK] Print Colour key. Page Numbering Format Bk(Black) 1,2,3.. (1),(2),(3).. Total Page Stamp -1-,-2-,-3-..
Page 227
COPIER Touch the [OK] key. Stamp Page Number Auto Manual First Number Last Number Auto Printing Starts from Page Touch the [OK] key. Stamp After touching the [OK] key, continue from step 5 of "GENERAL Cancel Page Numbering PROCEDURE FOR USING STAMP"...
COPIER PRINTING TEXT ON COPIES (Text) Entered text can be printed on copies. Up to 30 frequently used text strings can be stored. Example: Printing "April 2010 Planning Meeting" in the top left corner of the paper April 2010 Planning Meeting Touch the [Text] key in the stamp selection screen.
Page 229
COPIER Touch the [Print Colour] key. Stamp Touch the colour that you wish to use. When you have finished Text Cancel selecting the settings, touch the [OK] key. First Page AAA AAA Stamp Print Colour Print Colour Pre-Set All Pages Bk(Black) Recall Store/Delete...
Page 230
COPIER Storing, editing, and deleting text strings Touch the [Text] key in the stamp selection screen. See steps 1 to 4 of "GENERAL PROCEDURE FOR USING STAMP" (page 2-60). Touch the [Store/Delete] key. Stamp Cancel Text First Page Print Colour Pre-Set All Pages Bk(Black)
Page 231
COPIER Touch the [Back] key. Stamp Stamp You will return to the screen of step 2. Text Text Back To copy using a stored text string, continue from step 2 of "PRINTING TEXT ON COPIES (Text)" (page 2-70). Store/Delete Store/Delete No.01 AAA AAA No.02 BBB BBB No.03 CCC CCC...
COPIER CHECKING THE STAMP LAYOUT (Layout) After stamp items have been selected, you can check the print layout, change the print position, and delete stamp items. Touch the [Layout] key. Special Modes Cancel Special Modes Stamp Date Page Text Numbering Layout The [Layout] key can only be touched when stamp items have been selected.
Page 233
COPIER Touch the key of the desired destination Stamp position. Move Select the location to move the selected item. The touched position key is highlighted and the print position changes. The keys that show the print positions will appear as follows depending on the state of the settings.
COPIER [Image Edit] KEY When the [Image Edit] key is touched in the 1st special modes menu screen, the image edit menu screen opens. Image edit menu screen Special Modes Special Modes Image Edit Margin Shift Erase Pamphlet Copy Mirror Photo Repeat Centring Transparency...
COPIER REPEATING PHOTOS ON A COPY (Photo Repeat) Photo Repeat is used to create repeated images of a photo-size original (90 mm x 130 mm size, 100 mm x 100 mm size, 100 mm x 70 mm size, 65 mm x 70 mm size or 100 mm x 57 mm size (3" x 5" size, 7" x 5" size, 4" x 2-1/2" size, 2-1/2"...
Page 236
COPIER Press the [COLOUR START] key or the [BLACK & WHITE START] key. Copying will begin. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.) To cancel scanning and copying...
COPIER REVERSING THE IMAGE (Mirror Image) This feature is used to make a copy that is a mirror image of the original. Original Mirror image copy Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Place the original in the automatic document feeder ☞...
COPIER COPYING IN THE CENTRE OF THE PAPER (Centring) This is used to centre the copied image on the paper. This lets you place the image in the centre of the paper when the original size is smaller than the paper size or when the image is reduced.
Page 239
COPIER • The image can be reduced when using the centring function, but not enlarged. • When the original size or the paper size is displayed as a special size, this function cannot be used. To cancel centring... Touch the [Centring] key in the screen of step 3 so that it is not highlighted. 2-81 Contents...
COPIER REVERSING BLACK AND WHITE IN A COPY (B/W Reverse) This is used to reverse black and white in a copy to create a negative image. This function can only be used for black and white copying. Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce toner consumption.
Page 241
COPIER • When this function is selected, the "Original Image Type" setting for exposure adjustment automatically changes to "Text". • This function is not available in some countries and regions. To cancel B/W reverse... Touch the [B/W Reverse] key in the screen of step 3 so that it is not highlighted. 2-83 Contents...
COPIER [Colour Adjustments] KEY When the [Colour Adjustments] key is touched in the 1st special modes menu screen, the colour adjustments menu screen opens. Colour adjustments menu screen Special Modes Special Modes Colour Adjustments Margin Shift Erase Pamphlet Copy Suppress RGB Adjust Sharpness Transparency...
COPIER ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust) This feature is used to strengthen or weaken any one of the three colour components R (red), G (green), or B (blue). R(Red)+ G(Green)+ B(Blue)+ Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Place the original in the automatic document feeder.
Page 244
COPIER To cancel an RGB adjust setting... Touch the [Cancel] key in the screen of step 3. 2-86 Contents...
(3) Touch the [Sharpness] key. ☞ [Colour Adjustments] KEY (page 2-84) Adjust the image. (1) Touch the [Soft] key or the [Sharp] key. Colour Adjustments (2) Touch the [OK] key. Cancel Sharpness You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode.
Page 246
COPIER To cancel the sharpness setting... Touch the [Cancel] key in the screen of step 3. 2-88 Contents...
COPIER WHITENING FAINT COLOURS IN COPIES (Suppress Background) This feature is used to suppress light background areas. Level [+] The lightness level at which suppression takes place can be adjusted. Light areas are suppressed. Level [-] Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Place the original in the automatic document feeder.
Page 248
COPIER Press the [COLOUR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOUR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
COPIER ADJUSTING THE COLOUR (Colour Balance) The colour, tone, and density of colour copies can be adjusted. Each of the colours yellow, cyan, magenta, and black Light Dark are divided into 8 gradations from light to dark, and the average density of each gradation can be adjusted, or all eight gradations can be adjusted at once.
Page 250
COPIER Adjust the colour balance. (2), (3) (1) Select the colour to be adjusted. Colour Adjustments Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black). Cancel Colour Balance If only the rectangular area around the letter in a key is highlighted, the settings have been changed from the factory default settings.
COPIER ADJUSTING THE BRIGHTNESS OF A COPY (Brightness) The brightness of colour images can be adjusted. Darker Original Brighter Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Place the original in the automatic document feeder. ☞...
COPIER ADJUSTING THE INTENSITY OF A COPY (Intensity) This is used to adjust the intensity (saturation) of colour images. Weakening the Original Strengthening intensity the intensity Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Place the original in the automatic document feeder.
Page 253
COPIER To cancel an intensity setting... Touch the [Cancel] key in the screen of step 3. 2-95 Contents...
COPIER CHECKING COPIES BEFORE PRINTING (Proof Copy) This feature prints only one set of copies, regardless of how many sets have been specified. After the first set is checked for errors, the remaining sets can be printed. Previously it was necessary to re-scan the original each time changes to settings were required.
Page 255
COPIER Set the number of copies (number of sets) with the numeric keys. If you will copy multiple originals using the document glass, Special Modes switch to sort mode after this step. ☞ Sort mode (page 2-36) 2-Sided Copy Plain Up to 999 copies (sets) can be set.
Page 256
COPIER Change the settings. (1) Touch the key of the setting that you want Proof Copy to change. The setting screen of the touched key opens. Change the settings and touch the [OK] key. (2) Touch the [OK] key. Colour Mode Paper Select 2-Sided Copy Output...
COPIER CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE COPYING (Original Count) The number of scanned original sheets can be counted and displayed before copying is executed. By allowing you to check the number of original sheets that were scanned, this helps reduce the occurrence of copy mistakes. Insert the originals face up in the document feeder tray.
COPIER COPYING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original) Originals that are A4 size and A5 size (8-1/2" x 11" size and 5-1/2" x 8-1/2" size), 8-1/2" x 14" size and 8-1/2" x 11" size can be placed together in the automatic document feeder and copied. When scanning the originals, the machine automatically detects the size of each original and uses paper appropriate for that size.
Page 259
COPIER Insert the originals face up in the document feeder tray. Place the originals with the sides that are the same length aligned on the left. Place with the sides that are the same length aligned on the left. Inch 8-1/2"...
COPIER COPYING THIN ORIGINALS (Slow Scan Mode) Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent thin originals from misfeeding. Insert the originals face up in the document feeder tray. Indicator line Insert the originals all the way into the document feeder tray.
Page 261
COPIER The "2-Sided to 2-Sided" and "2-Sided to 1-Sided" modes of automatic 2-sided copying cannot be used. To cancel the slow scan mode setting... Touch the [Slow Scan Mode] key in the screen of step 2 so that it is not highlighted. System Settings (Administrator): Original Feeding Mode This is used to have scanning always take place in slow scan mode.
COPIER COPYING MULTIPLE BUSINESS CARDS (8 Business Cards Layout) 8 Business Cards Layout can be used to copy up to 8 business cards on one sheet of paper. Use this function to create a list of business cards or to file business cards as a group. 8 Business Cards Layout Load the business cards.
Page 263
COPIER • The "2-Sided to 2-Sided" and "1-Sided to 2-Sided" modes of automatic 2-sided copying cannot be used. • The following functions and paper cannot be used. - Zoom function - Auto Image - Label To cancel the 8 Business Cards Layout setting... Touch the [Cancel] key in the screen of step 3.
COPIER ‘ CONVENIENT COPY FUNCTIONS This section explains convenient copy functions such as interrupting a copy run, changing the order of reserved copy jobs, and storing copy settings in a program. INTERRUPTING A COPY RUN (Interrupt copy) When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy. Interrupt copy temporarily stops the job in progress and lets you perform the interrupt copy job first.
Page 265
COPIER • If user authentication is enabled, the login screen will appear when the [Interrupt] key is pressed. Enter your user name and password to log in. The number of copies made will be added to the count of the user that logged in. •...
COPIER CHECKING A PREVIEW IMAGE OF A COPY (Preview) You can touch the [Preview] key so that it is highlighted in the base screen and then scan the original to check a preview image of the copy in the touch panel before printing the copy. Place the original.
Page 267
COPIER To cancel the operation... Press the [CLEAR ALL] key ( System Settings (Administrator): Default Preview You can set the default state of the [Preview] key to always selected (highlighted). Enable this setting if you wish to check a preview image each time you make a copy. 2-109 Contents...
COPIER PREVIEW SCREEN The preview screen is explained below. Reset Preview Colour Display Output Function Rev. Display Rotation Start Copy 0001 /0010 Preview image [Display Output] key A preview image of the scanned original is displayed. Touch to show the selected modes and settings as icons. If the image is cut off, use the scroll bars at the right and Functions that are displayed are as follows: bottom of the screen to scroll the image.
COPIER JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode. When the [JOB STATUS] key is pressed, the job status screen of the mode that was being used before the key was pressed appears.
COPIER JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of the job queue screen that shows copy and print jobs waiting to be printed and the job currently in progress, the completed job screen that shows jobs that have been completed, and the spool screen that shows print jobs that have been spooled and encrypted PDF jobs that are waiting for a password to be entered.
Page 271
COPIER Job key display Each job key shows the position of the job in the job queue and the current status of the job. Copy 002/000 Waiting Indicates the number (position) of the job in the job Status queue. Shows the job status. When the job currently being printed is finished, the job Message Status...
COPIER CANCELLING A JOB THAT IS WAITING IN THE QUEUE A copy job that is waiting to be printed can be cancelled. Press the [JOB STATUS] key. JOB STATUS Cancel the job. (1) Touch the [Print Job] tab. Print Job Scan to Fax Job Internet Fax...
COPIER GIVING PRIORITY TO A JOB IN THE QUEUE If a copy job is begun when there are already multiple jobs in the queue, the copy job will appear at the end of the queue. However, if you have an urgent copy job, you can give priority to the job and have it executed first. Press the [JOB STATUS] key.
COPIER CHECKING INFORMATION ON A COPY JOB WAITING IN THE QUEUE Detailed information can be displayed on a copy job waiting in the queue. Press the [JOB STATUS] key. JOB STATUS Checking job details (1) Touch the [Print Job] tab. Print Job Scan to Fax Job...
COPIER STORING COPY OPERATIONS (Job Programs) A job program is a group of copy settings stored together. When copy settings are stored in a job program, the settings can be retrieved and used for a copy job by means of a simple operation. For example, suppose A4 (8-1/2"...
COPIER STORING (EDITING/DELETING) A JOB PROGRAM The procedures for storing copy settings in a job program and deleting a job program are explained below. Press the [#/P] key ( LOGOUT Touch the [Store/Delete] tab. Exit Job Programs Press program number. Recall Store/Delete Touch a numeric key.
Page 277
COPIER Select the copy settings that you wish to To store, make selections and press Cancel [OK], to delete, press [Cancel]. store in the job program and touch the Colour Mode Special Modes [OK] key. Full Colour 2-Sided Copy Plain To assign a name to the program, touch the [Program Name] Output Exposure...
Page 278
CHAPTER 3 PRINTER This chapter provides detailed explanations of the procedures for using the printer function. PRINTER FUNCTION OF THE MACHINE ..3-3 CONVENIENT PRINTING FUNCTIONS PRINTING FROM WINDOWS CONVENIENT FUNCTIONS FOR CREATING PAMPHLETS AND POSTERS .
Page 279
PRINTER PRINT FUNCTIONS FOR SPECIAL CHECKING THE PRINT STATUS PURPOSES ......3-49 JOB STATUS SCREEN .
PRINTER PRINTER FUNCTION OF THE MACHINE The machine is equipped standard with a full colour printing function. To enable printing from your computer, a printer driver must be installed. See the table below to determine which printer driver to use in your environment. Environment Printer driver type Remarks...
PRINTER PRINTING FROM WINDOWS BASIC PRINTING PROCEDURE The following example explains how to print a document from "WordPad", which is a standard accessory program in Windows. Select [Print] from the [File] menu of WordPad. If you are using windows 7, click the button.
Page 282
PRINTER Select print settings. (1) Click the [Paper] tab. (2) Select the paper size. To select settings on other tabs, click the desired tab and then select the settings. (3) Click the [OK] button. • Make sure the paper size is the same as the paper size set in the software application. •...
PRINTER SELECTING THE PAPER This section explains how to configure the "Paper Selection" setting on the [Paper] tab of the printer driver properties window. Before printing, check the paper sizes, paper types, and paper remaining in the machine's trays. To view the most recent tray information, click the [Tray Status] button. •...
PRINTER PRINTING ON ENVELOPES The bypass tray can be used to print on special media such as envelopes. The procedure for printing on an envelope from the printer driver properties screen is described below. For the types of paper that can be used in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER"...
PRINTER PRINTING WHEN THE USER AUTHENTICATION FUNCTION IS ENABLED When the user authentication function is enabled in the machine's system settings (administrator), your user information (login name, password, etc.) must be entered in the printer driver properties window before you can print. The information that must be entered varies depending on the authentication method being used, so check with the administrator of the machine before printing.
Page 286
PRINTER Enter your login name and password. (1) Click the [Job Handling] tab. (2) Enter your user information. • When authentication is by login name/password Select the [Login Name] and [Password] checkboxes so that checkmarks appear, and enter your login name and password. Enter 1 to 32 characters for the password.
Page 287
PRINTER • When user authentication is enabled in the system settings (administrator), printing is possible without entering user information if black and white printing is set in the printer driver. For black and white print settings, see "BLACK AND WHITE PRINTING"...
PRINTER VIEWING PRINTER DRIVER HELP When selecting settings in the printer driver, you can display Help to view explanations of the settings. Open the printer driver properties window from the print window of the software application. (1) Select the printer driver of the machine. (2) Click the [Preferences] button.
PRINTER SAVING FREQUENTLY USED PRINT SETTINGS Settings configured on each of the tabs at the time of printing can be saved as user settings. Saving frequently used settings or complex colour settings under an assigned name makes it easy to select those settings the next time you need to use them.
Page 290
PRINTER Check and save the settings. (1) Check the displayed settings. (2) Enter a name for the settings (maximum of 20 characters). (3) Click the [OK] button. Click the [OK] button. Start printing. • Up to 30 sets of user settings can be saved. •...
PRINTER USING SAVED SETTINGS Open the printer driver properties window from the print window of the software application. (1) Select the printer driver of the machine. (2) Click the [Preferences] button. The button that is used to open the printer driver properties window (usually [Properties] or [Printing Preferences]) may vary depending on the software application.
PRINTER CHANGING THE PRINTER DRIVER DEFAULT SETTINGS The default settings of the printer driver can be changed using the procedure below. The settings selected using this procedure are saved and become the default settings when printing from a software application. (Settings selected in the printer driver properties window when printing from an application remain in effect only while the application is in use.) Click the [Start] button (...
Page 293
PRINTER Configure the settings and click the [OK] button. For explanations of the settings, see printer driver Help. 3-16 Contents...
PRINTER PRINTING FROM A MACINTOSH BASIC PRINTING PROCEDURE The following example explains how to print a document from the standard accessory program "TextEdit" in Mac OS X ("SimpleText" in Mac OS 9). SELECTING PAPER SETTINGS Select paper settings in the printer driver before selecting the print command. Select [Page Setup] from the [File] menu of TextEdit.
PRINTER PRINTING Select [Print] from the [File] menu of TextEdit. In Mac OS 9, select [Print] from the [File] menu of SimpleText. The menu used to execute printing may vary depending on the software application. Make sure that the correct printer is selected.
PRINTER SELECTING THE PAPER This section explains the [Paper Feed] settings ("Paper Source" setting in [General] in Mac OS 9) in the print settings window. • When [Auto Select] is selected A tray with plain paper or recycled paper (the factory default setting is plain paper only) of the size specified in "Paper Size"...
PRINTER PRINTING ON ENVELOPES The bypass tray can be used to print on special media such as envelopes. The procedure for printing on an envelope from the printer driver properties screen is described below. For the types of paper that can be used in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER"...
PRINTER PRINTING WHEN THE USER AUTHENTICATION FUNCTION IS ENABLED When the user authentication function is enabled in the machine's system settings (administrator), you must enter your user information (login name, password, etc.) in order to print. The information that must be entered varies depending on the authentication method being used, so check with the administrator of the machine before printing.
Page 300
PRINTER Start printing. (1) Enter your user information. • When authentication is by login name/password Enter your login name in "Login Name" and your password in "Password" (1 to 32 characters). • When authentication is by user number Enter your user number (5 to 8 digits) in "User Number".
PRINTER FREQUENTLY USED FUNCTIONS This section explains frequently used functions. • SELECTING THE COLOUR MODE • PRINTING MULTIPLE PAGES ON ONE PAGE (page • TWO-SIDED PRINTING (page 3-27) 3-30) • FITTING THE PRINT IMAGE TO THE PAPER (page • STAPLING OUTPUT (page 3-32) 3-29) The explanations assume that the paper size and other basic settings have already been selected.
PRINTER BLACK AND WHITE PRINTING [Black and White] can be selected on the [Main] tab as well as on the [Color] tab. Click the [Black and White Print] checkbox on the [Main] tab so that a checkmark appears. The [Black and White Print] checkbox on the [Main] tab and the "Color Mode" setting on the [Color] tab are linked. When the [Black and White Print] checkbox is selected on the [Main] tab, [Black and White] is also selected on the [Color] tab.
PRINTER SELECTING A PRINT MODE SETTING This section explains the procedure for selecting a print mode setting. The "Print Mode Settings" consist of the following three items: Normal: This mode is suitable for printing data such as regular text or a table. High Quality: The print quality of colour photos and text is high.
PRINTER TWO-SIDED PRINTING The machine can print on both sides of the paper. This function is useful for many purposes, and is particularly convenient when you want to create a simple pamphlet. Two-sided printing also helps conserve paper. Orientation Print results Windows Macintosh Windows...
Page 305
PRINTER Macintosh (1) Select [Layout]. (2) Select [Long-edged binding] or [Short-edged binding]. • In Mac OS X v10.2.8, select the settings in [Advanced]. • In Mac OS 9, select [Output/Document Style] and then select [Flip on long edge] or [Flip on short edge].
PRINTER FITTING THE PRINT IMAGE TO THE PAPER This function is used to automatically enlarge or reduce the printed image to match the size of the paper loaded in the machine. This is convenient for such purposes as enlarging an A5 or invoice size document to A4 or letter size to make it easier to view, and to print when the same size of paper as the document image is not loaded in the machine.
PRINTER PRINTING MULTIPLE PAGES ON ONE PAGE This function can be used to reduce the print image and print multiple pages on a single sheet of paper. This is convenient when you want to print multiple images such as photos on a single sheet of paper, and when you want to conserve paper.
Page 308
PRINTER Windows (1) Configure the settings on the [Main] tab. (2) Select the number of pages per sheet. (3) If you wish to print borderlines, click the [Border] checkbox so that a checkmark appears. (4) Select the order of the pages. (2) (3) Macintosh (1) Select [Layout].
PRINTER STAPLING OUTPUT The staple function can be used to staple output. This function saves considerable time when preparing handouts for a meeting or other stapled materials. The staple function can also be used in combination with two-sided printing to create materials with a more sophisticated appearance.
Page 310
PRINTER Windows (1) Configure the settings on the [Main] tab. (2) Select the "Binding Edge". (3) Select the staple function. For the staple function, select the number of staples in the "Staple" menu. Macintosh (1) Select [Printer Features]. (2) Select the "Binding Edge". (3) Select the staple function.
PRINTER CONVENIENT PRINTING FUNCTIONS This section explains convenient functions for specific printing objectives. • CONVENIENT FUNCTIONS FOR CREATING • FUNCTIONS THAT COMBINE TEXT AND IMAGES PAMPHLETS AND POSTERS (page 3-46) • FUNCTIONS TO ADJUST THE SIZE AND • PRINT FUNCTIONS FOR SPECIAL PURPOSES ORIENTATION OF THE IMAGE (page 3-38) (page 3-49)
Page 312
PRINTER Macintosh (1) Select [Printer Features]. (2) Select the "Binding Edge". (3) Select [Tiled Pamphlet] or [2-Up Pamphlet]. • In Mac OS X v10.2.8, select from the "2-Side Printing" and "Binding Edge" menus in [Advanced]. • In Mac OS 9, select the settings in [Output/Document Style].
PRINTER INCREASING THE MARGIN (Margin Shift) This function is used to shift the print image to increase the margin at the left, right, or top of the paper. This is convenient when you wish to staple or punch the output but the binding area overlaps the text.
PRINTER CREATING A LARGE POSTER (Poster Printing) (This function is only available in Windows.) One page of print data can be enlarged and printed using multiple sheets of paper (4 sheets (2 x 2), 9 sheets (3 x 3) or 16 sheets (4 x 4)). The sheets can then be attached together to create a large poster.
PRINTER FUNCTIONS TO ADJUST THE SIZE AND ORIENTATION OF THE IMAGE ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees) This feature rotates the image 180 degrees so that it can be printed correctly on paper that can only be loaded in one orientation (such as envelopes or paper with punch ABCD holes).
PRINTER ENLARGING/REDUCING THE PRINT IMAGE (Zoom/XY-Zoom) This function is used to enlarge or reduce the image to a selected percentage. This allows you to enlarge a small image or add margins to the paper by slightly reducing an image. When using the PS printer driver (Windows), you can set the width and length percentages separately to change the proportions of the image.
PRINTER ADJUSTING LINE WIDTHS WHEN PRINTING (Line Width Settings) (This function is only available in Windows.) When lines in special applications such as CAD cannot be printed correctly, this setting can be used to adjust line widths, such as making overall line widths wider. (This setting is only effective for vector data;...
PRINTER REVERSING THE IMAGE (Mirror Image) The image can be reversed to create a mirror image. This function can be used to conveniently print a design for a woodblock print or other printing medium. Windows (This function can be used when the PS printer driver is used.) (1) Click the [Advanced] tab.
PRINTER COLOUR MODE ADJUSTMENT FUNCTION ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE (Colour Adjustment) The brightness and contrast can be adjusted in the print settings when printing a photo or other image. These settings can be used for simple corrections when you do not have image editing software installed on your computer. Windows (1) Click the [Color] tab.
PRINTER PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black) (This function is only available in Windows.) When printing a colour image in greyscale, colour text ABCD ABCD and lines that are faint can be printed in black. (Raster data such as bitmap images cannot be adjusted.) This allows you to bring out colour text and lines that are faint and difficult to see when printed in greyscale.
PRINTER SELECTING COLOUR SETTINGS TO MATCH THE IMAGE TYPE (Advanced Colour) Preset colour settings are available in the machine's printer driver for various uses. These enable printing using the most suitable colour settings for the colour image type. Advanced colour settings can also be configured to match the objective of the colour image, such as colour management settings and the screening setting for adjustment of colour tone expression.
Page 322
PRINTER Macintosh (1) Select [Color]. (2) Select colour print settings. To use the Mac OS Color Management function, select the [ColorSync] checkbox . When this is done, "Image Type" cannot be selected. (3) Select the colour image type. An image type to match the data to be printed can be selected from the pull-down menu.
PRINTER FUNCTIONS THAT COMBINE TEXT AND IMAGES ADDING A WATERMARK TO PRINTED PAGES (Watermark) Faint shadow-like text can be added to the background of the printed image as a watermark. The size, colour, density, angle, and print position of the watermark text can be adjusted.
PRINTER PRINTING AN IMAGE OVER THE PRINT DATA (Image Stamp) (This function is only available in Windows.) A bitmap or JPEG image stored on your computer can be printed over the print data. The size, position, and angle of the image can be adjusted. This feature can be used to "stamp"...
PRINTER CREATING OVERLAYS FOR PRINT DATA (Overlays) (This function is only available in Windows.) The print data can be printed in a previously created XXXX XXXX overlay. By creating table rulings or a decorative frame in an application different from that of the text file and 1 100 1 100 XXXX...
PRINTER PRINT FUNCTIONS FOR SPECIAL PURPOSES PRINTING SPECIFIED PAGES ON DIFFERENT PAPER (Different Paper) • Using this function in a Windows environment The front and back cover and specified pages of a document can be printed on paper that is different from the other pages.
Page 327
PRINTER Macintosh (This function can only be used in Mac OS 9, Mac OS X v10.4.11, v10.5 to 10.5.8 and v10.6 to 10.6.2.) (1) Select [Printer Features]. (2) Select [Different Paper]. (3) Select cover insertion settings. Select the print setting, paper tray, and paper type for the cover page and last page.
PRINTER ADDING INSERTS WHEN PRINTING ON TRANSPARENCY FILM (Transparency Inserts) When printing on transparency film, this function helps prevent the sheets of transparency film from sticking together by inserting a sheet of paper between each sheet of film. It is also possible to print the same content on each inserted sheet of paper as is printed on the corresponding sheet of transparency film.
PRINTER PRINTING A CARBON COPY (Carbon Copy) (This function is only available in Windows.) This function is used to print an additional copy of the print image on paper that is the same size but from a different paper tray. For example, if carbon copy print is selected when standard paper is loaded in tray 1 and coloured paper is loaded in tray 2, a print result similar to a carbon copy...
PRINTER TWO-SIDED PRINTING WITH SPECIFIC PAGES PRINTED ON THE FRONT SIDE (Chapter Inserts) (This function is only available in Windows.) You can have specific pages printed on the front side of Example: the paper. When pages 4 and 8 are specified as page settings. When a page (such as the first page of a chapter) is specified as a front side page, the page will be printed on the front side of the paper even if would normally be...
PRINTER CONVENIENT PRINTER FUNCTIONS SAVING AND USING PRINT FILES (Retention/Document Filing) This function is used to store a print job as a file on the machine's hard drive, allowing the job to be printed from the operation panel when needed. The location for storing a file can be selected to prevent the file from being mixed together with files of other users.
Page 332
PRINTER Windows (1) Click the [Job Handling] tab. (2) Select the retention setting. Click the [Retention] checkbox . Select the retention method in "Retention Settings". To enter a password (5 to 8 digit number), click the [Password] checkbox (3) Select document filing settings. Select the folder for storing the file in "Document Filing Settings".
Page 333
PRINTER Macintosh (1) Select [Job Handling]. (2) Select the retention setting. Click the [Retention] checkbox . Select the retention method in "Retention Settings". To simplify operation the next time the same password is set, click the (lock) button after entering the password (5 to 8 digit number). (3) Select document filing settings.
PRINTER PRINTING WITHOUT THE PRINTER DRIVER When you do not have the printer driver installed on your computer, or when the software application used to open a file that you wish to print is not available, you can print directly to the machine without using the printer driver. The file types (and corresponding extensions) that can be printed directly are shown below.
PRINTER DIRECTLY PRINTING A FILE ON AN FTP SERVER When an FTP server is configured in the machine's Web pages, you can specify and print a file on the FTP server from the operation panel of the machine. This saves you the trouble of downloading the file and printing it from a computer. For the procedure for accessing the Web pages, see the Start Guide.
PRINTER Print the selected file. Cancel Print File-01.tiff (1) Select print conditions. If you selected a file (PCL, PS, or XPS) in step 3 that Paper Select Number of Prints includes print settings, the settings will be applied. Auto B/W Print (1 999) (2) Touch the [Print] key.
Page 337
PRINTER Access the USB memory device. (1) Touch the [DOCUMENT FILING] key. DOCUMENT COPY IMAGE SEND FILING (2) Touch the [Ex Data Access] tab. File Retrieve Scan to HDD HDD Status Ex Data Access (3) Touch the [USB Memory] key. External Data Access USB Memory Network Folder...
Page 338
PRINTER Remove the USB memory device from the machine. When you select a PDF file that has a password, you must enter the password in the job status screen to begin printing. ☞ PRINTING AN ENCRYPTED PDF FILE (page 3-70) 3-61 Contents...
PRINTER DIRECTLY PRINTING A FILE IN A NETWORK FOLDER You can use the machine's operation panel to select and print a file on a server or in a shared folder of an individual's computer on the same network as the machine. Access the network.
Page 340
PRINTER Access the network folder. Select workgroup. Search (1) Touch the key of the workgroup that you Workgroup wish to access. Workgroup Name Work 1 Work 2 Work 3 Work 4 Work 5 Work 6 (2) Touch the key of the server or computer Select server.
Page 341
PRINTER Touch the key of the file that you wish to \\Server 1\User 1 print. File or Folder Name File-01.tiff • The icon appears to the left of keys of files that can be Folder01 printed. File-02.tiff • The icon is displayed to the left of keys of folders in the File-03.tiff network folder.
PRINTER DIRECTLY PRINTING FROM A COMPUTER Settings can be configured in the Web pages of the machine to enable direct printing from a computer without using the printer driver. For the procedure for accessing the Web pages, see the Start Guide. SUBMIT PRINT JOB You can specify a file to be printed directly without using the printer driver.
PRINTER E-MAIL PRINT An e-mail account can be configured in the machine to have the machine periodically check your mail server and automatically print received e-mail attachments without using the printer driver. • Configuring settings To use E-mail Print, you must first configure an e-mail account in the machine. To configure an account, click [Application Settings] and then [E-mail Print Settings] in the Web page menu.
PRINTER CHECKING THE PRINT STATUS JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode. When the [JOB STATUS] key is pressed, the job status screen of the mode that was being used before the key was pressed appears.
PRINTER SPOOL SCREEN/JOB QUEUE SCREEN/COMPLETED JOB SCREEN The job status screen consists of the job queue screen that shows copy and print jobs waiting to be printed and the job currently in progress, the completed job screen that shows jobs that have been completed, and the spool screen that shows print jobs that have been spooled and encrypted PDF jobs that are waiting for a password to be entered.
Page 346
PRINTER Job key display Each job key shows the position of the job in the job queue and the current status of the job. Computer01 002/000 Waiting Indicates the number (position) of the job in the job Status queue. Shows the job status. When the job currently being printed is finished, the job Message Status...
PRINTER PRINTING AN ENCRYPTED PDF FILE Encrypted PDF is used to protect a PDF file by requiring the entry of a password to print or edit the file. To directly print an encrypted PDF file on an FTP server or in a USB memory device, etc. connected to the machine, follow the steps below to enter the password and begin printing.
PRINTER GIVING A PRINT JOB PRIORITY/CANCELLING A PRINT JOB GIVING A PRINT JOB PRIORITY When the machine is busy copying or printing a received fax or other job, you can give priority to a print job that is waiting to be printed and print it ahead of the other jobs. Press the [JOB STATUS] key.
PRINTER CANCELLING A PRINT JOB A job being printed, a job waiting to be printed, or a spooled job can be cancelled. Press the [JOB STATUS] key. JOB STATUS Cancel the job. (1) Touch the [Print Job] tab. Print Job Scan to Fax Job Internet Fax...
PRINTER CHANGING TO ANOTHER PAPER SIZE AND PRINTING WHEN PAPER RUNS OUT If printing stops because the machine ran out of paper, or if the size of paper specified in the printer driver is not loaded in the machine, a message will appear in the touch panel. Printing will begin automatically when the [OK] key is touched and paper is loaded in the machine.
PRINTER APPENDIX PRINTER DRIVER SPECIFICATION LIST Available functions and output results may vary depending on the type of printer driver being used. Windows Macintosh Function PCL6 PCL5c Frequently used Copies 1-999 1-999 1-999 1-999 1-999 functions Orientation N-Up Number of 2,4,6,8,9,16 2,4,6,8,9,16 2,4,6,8,9,16...
Page 352
PRINTER Windows Macintosh Function PCL6 PCL5c Functions to Watermark combine text Image Stamp and images Overlay Image Quality Print Mode Normal/ Normal/ Normal/ Normal/ Normal/ High Quality/ High Quality/ High Quality/ High Quality/ High Quality Fine Fine Fine Fine Graphics Mode Selection Toner Save* Font...
PRINTER PRINTER SPECIFICATIONS Type Built-in 31 pages/min (When printing same document continuously on A4 (8-1/2"x11") plain paper in Continuous printing speed non-offset mode, excluding processing time.) Printing resolution 600x600 dpi / 1200x1200 dpi Printer driver type PCL5c, PCL6, PostScript 3 compatible*1, XPS* Supported protocols TCP/IP, IPX/SPX, NetBEUI, EtherTalk*1 Supported client PC...
Page 354
CHAPTER 4 FACSIMILE This chapter provides detailed explanations of the procedures for using the fax function. To use the fax function, the facsimile expansion kit must be installed. BASIC TRANSMISSION METHODS BEFORE USING THE MACHINE AS A FAX TRANSMISSION METHODS ....4-26 PREPARATIONS FOR FAX .
Page 355
FACSIMILE SENDING A FAX WHEN ANOTHER FAX RECEPTION MACHINE POLLS YOUR MACHINE (Polling Memory) ....... . . 4-95 RECEIVING FAXES .
Page 356
FACSIMILE USING AN EXTENSION PHONE CONNECTING AND USING AN EXISTING PHONE (Extension Phone Connection) ..4-116 • RECEIVING A FAX AFTER ANSWERING A CALL ON THE EXTENSION PHONE (Remote Reception) ....4-117 •...
FACSIMILE BEFORE USING THE MACHINE AS A This section provides information that you should know before using the machine as a fax machine. PREPARATIONS FOR FAX To use the machine as a fax, the telephone line must be connected and the type of line set. CONNECTION TO THE TELEPHONE LINE Be sure to use the provided telephone line cord "LINE"...
FACSIMILE MAKE SURE THE MAIN POWER SWITCH IS IN THE "ON" POSITION When the main power indicator on the operation panel is lit, the main power is on. If the main power indicator light is not lit, the main power is "off". Switch the main power switch to the "on" position and press the [POWER] key ( ) on the operation panel.
FACSIMILE CHECKING THE DATE AND TIME Verify that the correct date and time are set in the machine. The date and time are set in the system settings of the machine. When the [SYSTEM SETTINGS] key is pressed, the system settings menu screen appears on the touch panel. Select [Default Settings], [Clock], and [Clock Adjust], and set the year, month, day, hour, and minute.
FACSIMILE BASE SCREEN OF FAX MODE To use the fax function, select settings and operations in the base screen of fax mode. To display the base screen of fax mode, touch the [IMAGE SEND] key and then touch the [Fax] tab. DOCUMENT COPY IMAGE SEND...
Page 361
FACSIMILE BASE SCREEN OF FAX MODE This screen is used to select settings and operations in fax mode. DOCUMENT COPY IMAGE SEND (10) FILING Ready to send. Ready to send. (11) Speaker Resend Original exit place: Upper Exit Scan Internet Fax USB Mem.
Page 362
FACSIMILE (14) [Special Modes] key (16) This shows the currently selected fax reception mode and the amount of free memory remaining. Touch this key to use a special mode. ☞ SPECIAL MODES (page 4-68) If the remaining amount of fax memory becomes low, faxes can no longer be received.
Page 363
FACSIMILE Scan Internet Fax USB Mem. Scan PC Scan Function Review Address Book Original Auto Scan: Send: Erase Edge:10mm Direct TX Exposure Auto Day of the Week:Monday Timer Time: 21:30 Sub Address Resolution Standard Slow Scan Mode Address Review Special Modes File Quick File Auto Reception...
FACSIMILE ADDRESS BOOK SCREEN This screen is used to select a destination from the list of stored destinations. (10) CCC CCC 0123456789 Condition (11) Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD Address Entry EEE EEE FFF FFF Global GGG GGG HHH HHH...
FACSIMILE When using the network scanner function or the Internet fax function, a different icon will appear in the one-touch key display if a non-fax destination (address) is stored. ☞ RETRIEVING A FAX NUMBER FROM THE ADDRESS BOOK (page 4-18) •...
Page 366
FACSIMILE Index display Indexes make it easy to search for a destination (one-touch key). The destinations are displayed separately using alphabetical search characters and index numbers. To display a stored destination, touch the appropriate index tab. It is convenient to store frequently used destinations in the [Freq.] index. Specify that a destination be displayed in the [Freq.] index when you store the destination.
FACSIMILE FAX TRANSMISSION SEQUENCE This section explains the basic procedure for sending a fax. Place the original Place the original in the document feeder tray of the automatic document feeder, or on the document glass. Enter the destination fax number •...
Page 368
FACSIMILE Select image settings Select settings for the original to be faxed. Scan Internet Fax USB Mem. Scan PC Scan • [Original] key: Use this key to select the original size, the Address Book Original Auto original send size, and 2-sided original Scan: Send: scanning.
Page 369
FACSIMILE Begin transmission Scan the original and send the fax. If the original is placed on the document glass, follow these steps to start scanning and transmission: When sending a fax normally (memory transmission) (1) Press the [BLACK & WHITE START] key. (2) When scanning is finished, replace the original with the next original.
FACSIMILE ENTERING DESTINATIONS This section explains how to enter destination fax numbers. Destination fax numbers can be entered using the numeric keys, or by retrieving a previously stored fax number using the address book or a search number. ENTERING A FAX NUMBER WITH THE NUMERIC KEYS Enter the destination fax number with the numeric keys.
FACSIMILE RETRIEVING A FAX NUMBER FROM THE ADDRESS BOOK The address book screen shows stored destinations as one-touch keys. A destination fax number is retrieved by simply touching the one-touch key of that destination. This is called "one-touch dialling". It is also possible to store multiple fax numbers in a one-touch key, allowing you to retrieve all the numbers by simply touching the key.
FACSIMILE RETRIEVING A STORED DESTINATION A destination fax number is retrieved by simply touching the one-touch key of that destination. Touch the [Address Book] key. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original Auto Auto Scan: Send: Direct TX Exposure Auto...
FACSIMILE CHECKING AND DELETING ENTERED DESTINATIONS When multiple destinations have been entered, you can display and check the destinations. You can also delete a destination (cancel selection of the destination). Touch the [Address Review] key. Condition Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD...
FACSIMILE USING A SEARCH NUMBER TO RETRIEVE A DESTINATION A destination stored in the address book can be retrieved using the key. This can be done in the base screen of any of the modes or in the address book screen. Touch the key.
FACSIMILE RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK If a LDAP server is stored in the Web pages, you can look up a destination fax number in a global address book. Open the global address search screen. (1) Touch the [Address Book] key in the base Condition screen.
Page 376
FACSIMILE Select the destination. (1) Touch the key of the desired destination. Condition If no names are found that match the search letters, a Settings Detail message will appear. Touch the [OK] key to close the Address Review XXX AAA 0123456789 message and touch the [Search Again] key to search Search Again...
FACSIMILE USING THE RESEND FUNCTION The destinations of the most recent 8 transmissions by fax, Scan to E-mail, and/or Internet fax are stored. One of these can be selected to resend to that destination. Touch the [Resend] key. Ready to send. Ready to send.
FACSIMILE CHAIN DIALLING Number sequences entered with the numeric keys and/or one-touch keys can be linked together with pauses and dialled as a single number. Use chain dialling to dial a long number (such as an international number) when the country code and/or area code are stored separately in one-touch keys.
FACSIMILE BASIC TRANSMISSION METHODS This section explains the basic procedures for sending a fax. TRANSMISSION METHODS The methods that can be used to send a fax from the machine are explained below. Select the method that best suits your needs. To fax a large number of sheet originals, use the automatic document feeder.
Page 380
FACSIMILE To fax thick originals or pages of a book, use the document glass. ☞ USING THE DOCUMENT GLASS FOR TRANSMISSION (page 4-33) Transmission When the document glass is being used for a transmission, Quick Online transmission will not operate. If you wish to send a fax ahead of other previously reserved fax transmissions, use direct transmission mode.
FACSIMILE PLACEMENT ORIENTATION OF THE ORIGINAL A5 (5-1/2" x 8-1/2") or B5 size original in landscape orientation will be rotated 90 degrees and transmitted as A5 (5-1/2" x 8-1/2") or B5 image in portrait orientation. Transmission A5(5-1/2" x 8-1/2") image in A5(5-1/2"...
FACSIMILE FAX DESTINATION CONFIRMATION MODE The fax destination confirmation mode displays a destination confirmation message when a fax transmission is performed to prevent accidental transmission to the wrong destination. This function is enabled in the system settings (administrator). When the function is enabled, a message will appear to confirm the destination when the [BLACK & WHITE START] key is pressed to begin fax transmission.
FACSIMILE USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION This section explains how to use the automatic document feeder to send a fax. Place the originals face up in the document feeder tray with the edges Indicator aligned evenly. line Insert the originals all the way into the document feeder tray. Multiple originals can be placed in the document feeder tray.
FACSIMILE USING THE AUTOMATIC DOCUMENT FEEDER TO SEND A FAX IN DIRECT TRANSMISSION MODE Place the originals face up in the document feeder tray with the edges Indicator aligned evenly. line Insert the originals all the way into the document feeder tray. Multiple originals can be placed in the document feeder tray.
Page 385
FACSIMILE • The following functions cannot be used with direct transmission: Program, Timer Transmission, Card Shot, Job Build, Polling Memory, File, Quick File, Memory Box, 2-Sided Original Scanning, Global Address Search • Resending will not take place when a direct transmission is not successful due to a communication error or other reason. •...
FACSIMILE USING THE DOCUMENT GLASS FOR TRANSMISSION To fax a thick original or other original that cannot be fed through the automatic document feeder, open the automatic document feeder and place the original on the document glass. Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder.
Page 387
FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. If you have another page to scan, change pages and then press the [BLACK & WHITE START] key. Repeat until all originals have been scanned. If no action is taken for one minute, scanning automatically ends and the transmission is reserved. Touch the [Read-End] key.
FACSIMILE USING THE DOCUMENT GLASS TO SEND A FAX IN DIRECT TRANSMISSION MODE When sending a fax from the document glass in direct transmission mode, only one page can be transmitted. Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder.
Page 389
FACSIMILE Touch the [Direct TX] key. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original Auto Scan: Send: Direct TX Exposure Auto Sub Address Resolution Standard Address Review Special Modes File Quick File Auto Reception Preview Fax Memory:100% Press the [BLACK &...
FACSIMILE TRANSMISSION USING THE SPEAKER When the speaker is used to dial, the fax is sent after the number is dialled and the connection is established. If a person answers, you will be able to hear his or her voice, but you will not be able to speak. Place the original.
FACSIMILE SENDING THE SAME FAX TO MULTIPLE DESTINATIONS (Broadcast Transmission) This function is convenient when you need to send the same fax to multiple destinations, such as sending a report to branch offices in different regions. You can transmit to as many as 500 destinations in one broadcast operation. Transmission Originals It is convenient to store destinations to which you frequently send faxes by broadcast transmission in group keys.
Page 392
FACSIMILE Enter the destination fax number. (1) Touch the [Address Book] key in the base CCC CCC Pause Next Address 0123456789 screen. Condition For the [Address Book] key, see "BASE SCREEN OF Settings AAA AAA BBB BBB MODE" (page 4-8). Address Review CCC CCC DDD DDD...
Page 393
FACSIMILE Check the destinations and then touch Address Review the [OK] key. CCC CCC KKK KKK LLL LLL MMM MMM NNN NNN OOO OOO PPP PPP QQQ QQQ RRR RRR SSS SSS UUU UUU TTT TTT To cancel a specified destination... Touch the key of the destination that you wish to cancel.
Page 394
FACSIMILE Resending to unsuccessful broadcast transmission destinations The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the destinations failed, resend the fax to those destinations. Press the [JOB STATUS] key. JOB STATUS Touch the [Complete] key.
Page 395
FACSIMILE Resend to unsuccessful destinations. Detail Broadcast0001 (1) Touch the [Failed] tab. Retry Address Start Time Status (2) Touch the [Retry] key. DDD DDD 10:01 04/01 NG00000 10:10 04/01 NG00000 EEE EEE File Failed All Destinations (1) (2) • The procedure after the [Retry] key is touched varies depending on whether or not the document filing function was used.
FACSIMILE SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax) A document in a computer can be transmitted via the machine as a fax. Faxes are sent using the PC-Fax function in the same way as documents are printed. Select the PC-Fax driver as the printer driver on your computer and then select the Print command in the software application.
FACSIMILE IMAGE SETTINGS Settings for scanning the original are selected in the base screen of each mode. The current state of each setting appears to the right of the key used to select the setting. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original...
FACSIMILE AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) The automatic document feeder will automatically scan both sides of the document. Transmission 2-sided original Front and back are sent as two pages Touch the [Original] key. ☞ IMAGE SETTINGS (page 4-44) Specify the binding style of the 2-sided Fax/Original...
FACSIMILE SPECIFYING THE SCAN SIZE AND SEND SIZE When the original is placed, the original size and the send size set in the system settings appear in the base screen as the original size and send size. Scan Internet Fax USB Mem.
Page 400
FACSIMILE Specifying the original scan size (by paper size) If the size of the placed original is different from the displayed original size or you wish to change the original size, you must touch the [Original] key and directly specify the original size. Place the original in the document feeder tray or on the document glass and follow the steps below.
Page 401
FACSIMILE Touch the [OK] key. Fax/Original Scan Size 100% Send Size Auto Image Orientation 2-Sided 2-Sided Tablet Booklet When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. 4-48 Contents...
Page 402
FACSIMILE Specifying the original scan size (by numerical values) When scanning a non-standard size original such as a postcard or card, follow these steps to specify the original size. Touch the [Original] key. The original size set in the system settings appears to the right of the [Original] key. ☞...
Page 403
FACSIMILE Enter the scan size. (1), (2) (1) Enter the X (horizontal) dimension of the Fax/Original original. Cancel Size Input Touch the X (width) numeric value display key to open a number entry screen. Enter the width of the original with (25 356) the numeric keys, and touch the [OK] key in the number entry screen.
Page 404
FACSIMILE Specifying the send size of the original Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If a send size smaller than the scan size is selected, the image will be reduced. The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by numerical values.
Page 405
FACSIMILE Specify the orientation in which the original is placed. Fax/Original (1) Touch the appropriate [Image Orientation] Scan Size 141% Send Size key. If the wrong orientation is selected here, the image may not be sent properly when using enlargement/reduction. Image Orientation (2) Touch the [OK] key.
FACSIMILE CHANGING THE EXPOSURE The exposure can be changed to match the darkness of the original. Refer the following tables to select appropriate settings. Exposure settings Exposure When to select Auto This setting automatically adjusts the exposure for light and dark parts of the original. Select this setting when the original consists of dark text.
FACSIMILE CHANGING THE RESOLUTION The resolution can be selected to match the characteristics of the original, such as text or photo, the size of the text, and the darkness of the image. Refer the following tables to select appropriate settings. Resolution settings Resolution When to select...
FACSIMILE CHECKING THE IMAGE TO BE TRANSMITTED (Preview) If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before sending the image. * The factory default setting is disabled. Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel.
FACSIMILE PREVIEW CHECK SCREEN This section explains the preview check screen. Preview Sender Info Function Rev. Display Rotation Start Sending 0001 /0010 Preview image [Sender Info] key A preview of the scanned original appears. Touch to display the sender information for fax own If the image is cut off, use the scroll bars at the right and number.
FACSIMILE FAX RECEPTION This section explains the basic procedures for receiving faxes. RECEIVING FAXES When the reception mode is set to "Auto Reception", the machine will receive and print faxes automatically. The fax reception mode is displayed in the base screen. Scan Internet Fax USB Mem.
FACSIMILE RECEIVING A FAX When a fax is transmitted to the machine, the machine automatically receives and prints the fax. The machine rings and fax reception begins automatically. Beep A beep sounds when reception ends. • System Settings (Administrator): Speaker Settings This is used to change the volume and tone of the reception beep.
FACSIMILE RECEIVING A FAX MANUALLY A fax can be received manually using the touch panel. While the machine rings, touch the [Speaker] key in the base screen and then touch the [Fax Manual Reception] key that appears. Telephone mode. Speaker Resend Scan Internet Fax...
FACSIMILE PRINTING A PASSWORD-PROTECTED FAX (Hold Setting For Received Data Print) "Hold Setting for Received Data Print" can be enabled in the system settings (administrator) to have faxes received to memory without being printed. To print the faxes, a password must be entered. When this function is used, a password entry screen appears in the touch panel when a fax is received.
FACSIMILE CHECKING THE IMAGE BEFORE PRINTING When "Received Data Image Check Setting" is enabled* in the system settings (administrator), you can check a received image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a received image.
FACSIMILE IMAGE CHECK SCREEN This section explains the image check screen. Image Check Back 0123456789 04/04/2010 10:28 1 / 3 Display Rotation Print 0001 0010 Information display "Display Rotation" key This shows information on the displayed image. This rotates the image right or left by 90 degrees. The rotation applies to all pages in the file, not just the Preview image displayed page.
FACSIMILE FORWARDING RECEIVED FAXES (Fax Data Forward) When the machine cannot print because it is out of paper or out of toner, received faxes can be forwarded to another previously programmed fax machine. This function is convenient in an office or work area that has two or more telephone lines and another fax machine is connected to a different line than the machine.
FACSIMILE FORWARDING RECEIVED FAXES TO A NETWORK ADDRESS (Inbound Routing Settings) You can have received faxes automatically forwarded to an e-mail address, file server address, desktop address, or network folder address. This function can be used to forward received faxes to a specified address without printing them. The machine Forwarding Received fax...
Page 418
FACSIMILE Enabling the inbound routing function. (1) In the Web page menu, click [Application Settings], [Inbound Routing Settings], and then [Administration Settings]. (2) Select [Enable] in "Inbound Routing" and click the [Submit] button. Users without administrator rights can be prohibited from storing, editing, and deleting forwarding tables in this screen, and from specifying which table is used.
Page 419
FACSIMILE Store a forwarding table. Follow the steps below to store a forwarding table that combines a specified sender and forwarding address. (1) Click [Inbound Routing Settings] in the Web page menu and click the [Add] button. (2) Enter a "Table Name". (3) Select the line used for reception.
Page 420
FACSIMILE Specifying forwarding tables to be used. To use the inbound routing function, enable the forwarding tables that you wish to use from among the stored tables. (1) Click [Inbound Routing Settings] in the Web page menu. (2) Select [Always Forward] or [Forward on Selected Day &...
FACSIMILE SPECIAL MODES This section explains special modes that can be used for fax transmission. SPECIAL MODES When the [Special Modes] key is touched in the base screen, the special modes menu screen appears. The special modes menu consists of two screens. Touch the key to switch between the two screens.
Page 422
FACSIMILE (13) [Memory Box] key (14) [Polling] key ☞ ☞ SENDING A FAX WHEN ANOTHER MACHINE CALLING A FAX MACHINE AND INITIATING POLLS YOUR MACHINE (Polling Memory) (page RECEPTION (Polling) (page 4-92) 4-95) Special modes can generally be combined with other special modes, however, there are some combinations that are not possible.
FACSIMILE STORING FAX OPERATIONS (Program) A program is a group of transmission settings stored together. When transmission settings are stored in a program, the settings can be retrieved and used for a fax job by means of a simple operation. For example, suppose that the same A4 (8-1/2"...
Page 424
FACSIMILE Place the original. Place the original in the document feeder tray or on the document glass as appropriate for the functions stored in the program. When the original is a different size than the size setting, set the original size. ☞...
FACSIMILE ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function does not detect shadows and will eliminate everything appearing in the erase area - including shadows, text and images.) Scanning a thick book Not using the erase Using the erase...
Page 426
FACSIMILE Select the erase settings. (1) Touch the desired erase mode. Fax/Special Modes Select one of the 2 erase modes. Cancel Erase Touch the [Side Erase] key to open the following screen. Erase Edge Edge Erase Side Erase Cancel (0~20) Erase position for Original Side 2 Side Erase...
FACSIMILE SENDING A FAX AT A SPECIFIED TIME (Timer) When this function is used, transmission takes place automatically at a specified time. The timer transmission function makes it easy to perform reserved transmissions, broadcast transmissions and other transmissions at night or other times when phone rates are low. A timer setting can also be specified for polling reception to receive a fax when you are not present.
Page 428
FACSIMILE Set the time with the keys. (1) Specify the day. Fax/Special Modes Timer Cancel If you do not wish to specify a day, select [---]. In this case, transmission will begin when the time specified in (2) arrives. Day of the Week Time (2) Specify the time (hour, minute) Select the time in 24-hour format.
FACSIMILE SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE (Card Shot) This function lets you send the front and reverse sides of a card as a single page, without the need to send each side separately. Transmitted image Originals Transmission Front...
Page 430
FACSIMILE Specify the original size. (1) Enter the original size. Fax/Special Modes • Touch the X (width) numeric value display key and Card Shot Cancel enter the width. Fit to Send Size • Touch the Y (height) numeric value display key and (25~210) enter the height.
Page 431
FACSIMILE Touch the [Read-End] key. Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Configure Read-End If you will continue scanning additional cards, you can touch the [Configure] key to change the exposure, resolution, scan size, and send size. •...
FACSIMILE SENDING A LARGE NUMBER OF PAGES (Job Build) This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic document feeder, and transmit the pages in a single transmission. Use this function when there are more original pages than can be placed at once in the auto document feeder.
Page 433
FACSIMILE Press the [BLACK & WHITE START] key to scan the first set. To cancel scanning... Press the [STOP] key ( Insert the next set of originals and press the [BLACK & WHITE START] key. Repeat this step until all originals have been scanned. To cancel scanning...
FACSIMILE TRANSMITTING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original) Originals that are A4 size and A5 size (8-1/2" x 11" size and 5-1/2" x 8-1/2" size), 8-1/2" x 14" size and 8-1/2" x 11" size can be placed together in the automatic document feeder and transmitted. When scanning the originals, the machine automatically detects the size of each original.
Page 435
FACSIMILE Insert the originals face up in the document feeder tray. Place the originals with the sides that are the same length aligned on the left. Place with the sides that are the same length aligned on the left. Inch 8-1/2"...
Page 436
FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. A beep will sound to indicate that scanning is finished. To cancel scanning and copying... Press the [STOP] key ( • Once mixed size originals has been selected, an original scan size cannot be specified. •...
FACSIMILE FAXING THIN ORIGINALS (Slow Scan Mode) Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent thin originals from misfeeding. Insert the originals face up in the document feeder tray. Adjust the document guides slowly.
Page 438
FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( When this function is selected, automatic 2-sided scanning is not possible. To cancel slow scan mode... Touch the [Slow Scan Mode] key in the screen of step 3 so that it is not highlighted.
FACSIMILE CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE TRANSMISSION (Original Count) The number of scanned original sheets can be counted and displayed before transmission. Checking the number of scanned original sheets before transmission helps prevent transmission mistakes. Insert the originals face up in the document feeder tray.
Page 440
FACSIMILE When scanning ends, check the number of original sheets scanned and touch the [OK] key. XX pages of original have been scanned. (P.x) Send the scanned data? Transmission will begin. • When Job Build mode is used, the confirmation message will appear after the [Read-End] key is touched.
Page 441
FACSIMILE CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT (Transaction Report) A transaction report is automatically printed out to alert you when a transmission fails or when a broadcast transmission is performed. The transaction report contains a description of the transmission (date, start time, name of other party, time required, number of pages, result, etc.).
Page 442
FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK &...
FACSIMILE ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending) Your sender information (date, time, sender name, sender fax number, number of pages) is automatically added to the top of each fax page you transmit. Example of the sender information printed 04/APR/2010/Sat 3:00 PM AAAAA FAX No.
FACSIMILE TEMPORARILY CHANGING THE SENDER INFORMATION (Own Name Select) You can select the sender information printed on a transmitted fax from a list of stored senders. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Own Name Select] key. ☞...
FACSIMILE CALLING A FAX MACHINE AND INITIATING RECEPTION (Polling) The Polling function allows the receiving machine to call the transmitting machine and initiate reception of a document in that machine. Because the receiving machine initiates reception of a document, this is called "Polling Reception". (1) Requests fax transmission.
Page 446
FACSIMILE Press the [BLACK & WHITE START] key. Your machine will call the other machine and initiate reception of the fax. • Polling reception can be used in combination with the timer function to poll at any specified time, such as at night or when you are not present (Only one timer polling reception can be set.).
FACSIMILE INITIATING POLLING RECEPTION MANUALLY Use this procedure when you must start polling after listening to a recorded greeting, such as when using a fax information service. • Make sure that an original is not placed in the machine when using the polling reception function. •...
FACSIMILE SENDING A FAX WHEN ANOTHER MACHINE POLLS YOUR MACHINE (Polling Memory) Sending a document that has been scanned into memory when another machine polls your machine is called "Polling Memory". Prior to polling, the document that will be faxed to the other machine must be scanned into a polling memory box. This function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.
FACSIMILE SCANNING A DOCUMENT INTO POLLING MEMORY Follow these steps to scan a document into the memory box for polling transmission (Public Box). Place the original. Place the original face up in the document feeder tray, or face down on the document glass. When the original is a different size than the size setting, set the original size.
Page 450
FACSIMILE Select image settings and special Memory Box - Data Store modes. Memory Box Original Auto Scan: Send: List Exposure Auto Resolution Standard Special Modes Auto Reception Fax Memory:100% • A program, timer setting, transaction report, polling and document filing cannot be selected. •...
FACSIMILE CHECKING THE DOCUMENT IN THE PUBLIC BOX You can check the document stored in the machine's public box for memory polling. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Memory Box] key.
FACSIMILE DELETING A DOCUMENT FROM THE PUBLIC BOX Delete a document from the Public Box when it is no longer needed. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Memory Box] key.
FACSIMILE PERFORMING F-CODE COMMUNICATION This section explains how to perform F-code communication operations. F-code communication is possible with machines of other manufacturers that also support F-code communication. F-CODE COMMUNICATION Exchange of confidential documents (confidential communication), retrieval (polling) and distribution (polling memory) of information, and distribution of information to multiple destinations (relay broadcast transmission) are possible with other machines that support F-code communication.
FACSIMILE CREATING MEMORY BOXES IN THE MACHINE FOR F-CODE COMMUNICATION Before the F-code communication function can be used, special memory boxes must be created using "F-Code Memory Box" in the system settings. A box name and F-code (sub-address and passcode) are programmed in each box, and an F-code communication function is assigned to each box.
FACSIMILE CONFIDENTIAL COMMUNICATION USING F-CODES By sending a fax to an F-code memory box (confidential) in the receiving machine (your machine or the other machine), the sender can direct the transmission specifically to the user of the box. This is convenient for sending sensitive documents that you do not wish people other than the recipient to see, or when the receiving machine is shared by multiple departments.
FACSIMILE F-CODE CONFIDENTIAL TRANSMISSION Follow the steps below to send a confidential fax by adding an F-code to the fax number. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. When the original is a different size than the size setting, set the original size.
FACSIMILE CHECKING FAXES RECEIVED BY F-CODE CONFIDENTIAL RECEPTION When an F-code confidential fax is sent to your machine, the fax is received to the memory box specified by the F-code. To check received faxes, enter the print passcode. The machine rings and the fax is received.
Page 458
FACSIMILE Enter the print passcode with the numeric keys. Enter PIN via the 10-key. As each digit is entered, "–" changes to " ". Cancel Take care to enter the correct print passcode. If you make a mistake, a message will appear and you will return to the entry screen.
FACSIMILE POLLING RECEPTION USING F-CODES This function enables your machine to call another machine and initiate reception of a fax stored in an F-code memory box (polling memory) in the other machine. During the polling operation, your machine must correctly specify the F-code (sub-address and passcode) configured in the other machine or polling reception will not take place.
Page 460
FACSIMILE Enter the destination fax number. (1) Touch the [Address Book] key in the base Condition screen. Settings AAA AAA BBB BBB For the [Address Book] key, see "BASE SCREEN OF Address Review CCC CCC DDD DDD MODE" (page 4-8). Address Entry EEE EEE FFF FFF...
FACSIMILE POLLING MEMORY TRANSMISSION USING F-CODES When your machine receives a transmission request from another machine, this function sends a fax stored in an F-code memory box (polling memory) in your machine to that machine. The other machine must correctly specify the F-code configured in your machine or transmission will not take place.
Page 462
FACSIMILE Touch the [Data Store] key. Memory Box Exit Confidential Polling Memory Reception Data Store Print Data Data Check Delete Data Touch the key of the F-code memory Back Memory Box - Data Store polling box. Public Box Box 1 Box 2 Box 3 Box 4...
Page 463
FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK &...
FACSIMILE CHECKING THE DOCUMENT IN THE F-CODE MEMORY POLLING BOX You can check the document stored in the F-code memory polling box. A document in a memory box cannot be printed while the document is being transmitted. Select the special modes. (1) Touch the [Special Modes] key.
FACSIMILE DELETING A DOCUMENT STORED FOR F-CODE POLLING TRANSMISSION When a document in an F-code memory polling box is no longer needed, follow the steps below to delete it. A document in a memory box cannot be deleted while the document is being transmitted. Select the special modes.
FACSIMILE RELAY REQUEST TRANSMISSION USING F-CODES This function is used to send a fax to an F-code relay broadcast memory box in another machine and have that machine relay the fax to multiple end receiving machines. When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the end receiving machines can help reduce phone charges.
Page 467
FACSIMILE Place the original. Place the original face up in the document feeder tray, or face down on the document glass. When the original is a different size than the size setting, set the original size. ☞ SPECIFYING THE SCAN SIZE AND SEND SIZE (page 4-46) Enter the destination fax number.
FACSIMILE RELAY BROADCAST TRANSMISSION USING F-CODES When your machine receives an F-code relay request transmission, the fax is received to an F-code relay broadcast memory box in your machine. Your machine then relays the fax to each of the end receiving machines programmed in the memory box.
FACSIMILE USING AN EXTENSION PHONE This section explains how to use an extension phone to make voice calls and receive a fax after talking with the other party. CONNECTING AND USING AN EXISTING PHONE (Extension Phone Connection) You can connect an existing extension phone to the machine. The phone can be used for voice calls and to start fax reception on the machine.
FACSIMILE RECEIVING A FAX AFTER ANSWERING A CALL ON THE EXTENSION PHONE (Remote Reception) Follow the steps below if you need to start fax reception after answering a call and speaking on the extension phone. If you are on a pulse-dial (rotary) line, set the extension phone to issue tone signals. When you hear ringing, answer the call on the extension phone.
FACSIMILE CHECKING THE STATUS OF FAX JOBS This section explains how to check the status of reserved transmission jobs and received faxes. JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode.
FACSIMILE JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of two screens: the job queue screen, which shows reserved jobs and the job currently in progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key ((2) below).
Page 473
FACSIMILE Job key display The following information is shown in the job queue keys and completed job keys that appear in the job status screen. AAA AAA 10:22 04/01 000/004 Waiting Indicates the number (position) of the job in the job Time reserved / Time started queue.
Page 474
FACSIMILE • Completed job Message Status "Send OK" Transmission completed. "In Memory" Reception completed but the fax has not been printed. "Received" A received fax has been printed or deleted in the check image screen. "Forward OK" The received fax has been forwarded.
FACSIMILE OPERATION WHEN A JOB IN THE JOB QUEUE IS COMPLETED When a normal transmission job is completed, it moves to the completed jobs screen and "Send OK" appears in the status column. Received faxes, timer transmission jobs, retry jobs, and forwarding jobs are handled in the job status screen as explained below.
FACSIMILE CHECKING A RESERVED JOB OR THE JOB IN PROGRESS The detailed contents of a broadcast transmission or serial polling job can be displayed. Select (touch) the key of the job that you wish to check and touch the [Detail] key. The job details screen will appear (see below). Detail Broadcast0001 Progress:...
FACSIMILE CHECKING COMPLETED JOBS You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on completed broadcast transmission jobs, received fax forwarding jobs, serial polling jobs, and jobs that used document filing. Touch the key of the desired job in the completed jobs screen and touch the [Detail] key. The job detail screen (see below) will appear.
FACSIMILE CANCELLING A FAX IN PROGRESS OR A RESERVED FAX Follow the steps below to cancel a fax transmission that is in progress or a reserved fax job. Press the [JOB STATUS] key. JOB STATUS Select the fax job that you wish to Print Job Scan to Fax Job...
FACSIMILE GIVING PRIORITY TO A RESERVED FAX When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If you need to give priority to a job and send it ahead of the other jobs, follow the steps below. Press the [JOB STATUS] key.
FACSIMILE CHECKING THE ACTIVITY LOG (Image Sending Activity Report) IMAGE SENDING ACTIVITY REPORT You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred. The most recent 200 transactions are included in the report.
FACSIMILE INFORMATION APPEARING IN THE RESULT COLUMN Error types and other information are printed in the result column of transaction and activity reports. When a transaction report or activity report is printed, check the result of the transaction in the result column and take action as needed. Examples of messages that are printed in the result column Message Explanation...
FACSIMILE FACSIMILE SPECIFICATIONS Applicable telephone line Public switched telephone network, PBX Scanning resolution 8 x 3.85 lines/mm (Standard), 8 x 7.7 lines/mm (Fine, Fine-Halftone), 8 x 15.4 lines/mm (Super Fine, Super Fine - Halftone), 16 x 15.4 lines/mm (Ultra Fine, Ultra Fine - Halftone) (supports ITU-T standards) Transmission speed...
Page 483
CHAPTER 5 SCANNER/INTERNET FAX This chapter provides detailed explanations of the procedures for using the scanner function and the Internet fax function. To use the Internet fax function, the internet fax function must be available. USB memory mode can be used without installing a peripheral device. TRANSMITTING AN IMAGE BEFORE USING THE MACHINE AS A NETWORK SCANNER...
Page 484
SCANNER/INTERNET FAX INTERNET FAX RECEPTION FUNCTIONS SPECIAL MODES RECEIVING AN INTERNET FAX ... . . 5-107 SPECIAL MODES ......5-70 •...
SCANNER/INTERNET FAX BEFORE USING THE MACHINE AS A NETWORK SCANNER This section provides information that you should know before using the machine as a network scanner. NETWORK SCANNER FUNCTION The network scanner function of the machine can be used to scan an original, create an image file, and send the file over a network to a computer, FTP server, or other destination.
Page 486
SCANNER/INTERNET FAX USB memory mode ☞ SENDING AN IMAGE IN USB MEMORY MODE (page 5-35) USB Memory Scan The scanned file is sent to and stored in a USB memory device connected to the machine. Internet fax mode To use the Internet fax function, the Internet fax expansion kit must be installed. ☞...
SCANNER/INTERNET FAX PREPARATIONS FOR USE AS A NETWORK SCANNER MAKE SURE THE MAIN POWER SWITCH IS IN THE "ON" POSITION The main power is "on" when the main power indicator on the right side of the operation panel is lit. If the main power indicator is not lit, the main power is "off".
SCANNER/INTERNET FAX SETTINGS REQUIRED IN THE WEB PAGES To use scan mode and Internet fax mode, the basic network scanner settings, server settings such as SMTP and DNS server settings, and sender addresses must be configured in the Web pages. •...
SCANNER/INTERNET FAX STORING A DESTINATION FOR SCAN TO DESKTOP To store your computer in the machine as a destination for Scan to Desktop, Network Scanner Tool must be installed from the "Sharpdesk/Network Scanner Utilities" CD-ROM that accompanies the machine. To scan an image to your computer, Network Scanner Tool must be running on your computer.
SCANNER/INTERNET FAX BEFORE SENDING TO A DIRECT SMTP ADDRESS The machine supports Direct SMTP, which lets you directly send Internet faxes within your company without using a mail server. For the procedure for storing a Direct SMTP address in the address book, see "STORING DESTINATION ADDRESSES FOR EACH SCAN MODE IN THE ADDRESS BOOK"...
SCANNER/INTERNET FAX BASE SCREEN Scan mode, USB memory mode, Internet fax mode, and PC scan mode are used by selecting operations and settings in the base screens of those modes. To display the base screen of a mode, touch the [IMAGE SEND] key in the touch panel and then touch the tab of the mode that you wish to use.
Page 492
SCANNER/INTERNET FAX [Send Settings] key (11) Image settings Touch this key to select or enter the subject, file name, Image settings (original size, exposure, resolution, file sender name, or body text, which has been previously format, and colour mode) can be selected. ☞...
Page 493
SCANNER/INTERNET FAX • This chapter uses the base screen of scan mode as an example when operations common to all modes are explained. • The procedures in this chapter assume that the base screen of scan mode appears when the [IMAGE SEND] key is touched.
SCANNER/INTERNET FAX Checking what special modes are selected key appears in the base screen when a special mode or 2-sided scanning is selected. key can be touched to display the selected special modes. To close the screen, touch the [OK] key. Scan Internet Fax USB Mem.
Page 495
SCANNER/INTERNET FAX (10) [Bcc] key (12) Index tabs When using Scan to E-mail, touch the [Bcc] key when Touch this to change the displayed index tab. ☞ you wish to send a "Blind carbon copy" of the e-mail to an Index display (page 5-14) additional destination.
SCANNER/INTERNET FAX CHANGING THE DISPLAY OF ONE-TOUCH KEYS IN THE ADDRESS BOOK SCREEN You can show destinations of only a specific transmission mode in the address book screen, or change the displayed index tabs from the alphabetical tabs to the custom tabs. The procedure for selecting destinations does not change. Touch the [Sort Address] key.
Page 497
SCANNER/INTERNET FAX Ordered by search number (default) Ascending names Descending names Freq. Freq. Freq. ABCD ABCD ABCD Index names can be changed using "Custom Index" in the system settings, allowing you to create groups of one-touch keys that can be easily recognized. System Settings: Custom Index (page 7-22)
SCANNER/INTERNET FAX SCAN SEND SEQUENCE This section explains the basic procedure for scanning and transmission. Select settings in the order shown below to ensure smooth transmission. For the detailed procedures for selecting the settings, see the explanation of each setting in this chapter. Place the original Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
Page 499
SCANNER/INTERNET FAX Special mode settings Special modes can be selected. ☞ Scan Internet Fax USB Mem. Scan PC Scan SPECIAL MODES (page 5-70) Address Book Original Scan: Send: Auto Address Entry Exposure Auto Text Send Settings Resolution 200X200dpi Address Review File Format File Colour Mode...
SCANNER/INTERNET FAX ENTERING DESTINATIONS This section explains how to specify destination addresses, including selecting an address from the address book and retrieving an address by entering a search number. RETRIEVING A DESTINATION FROM THE ADDRESS BOOK The address book screen shows stored destinations as one-touch keys. The destinations are displayed in order by search number.
SCANNER/INTERNET FAX RETRIEVING A DESTINATION A destination is retrieved by selecting its one-touch key. Touch the [Address Book] key. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original Scan: Send: Auto Address Entry Exposure Auto Text Send Settings Resolution 200X200dpi Address Review...
SCANNER/INTERNET FAX CHECKING AND DELETING THE SELECTED DESTINATIONS When multiple destinations have been selected, you can display and check the destinations. You can also delete a destination from the list (cancel selection of the destination). Touch the [Address Review] key. Condition Settings AAA AAA...
SCANNER/INTERNET FAX USING A SEARCH NUMBER TO RETRIEVE A DESTINATION A destination stored in the address book can be retrieved using the key. This can be done in the base screen of any of the modes or in the address book screen. Touch the key.
SCANNER/INTERNET FAX ENTERING AN ADDRESS MANUALLY Scan to E-mail, Internet fax and data entry mode addresses can be manually entered. Display the address input screen. (1) Touch the tab of the mode that you wish to Scan Internet Fax USB Mem. Scan PC Scan use.
SCANNER/INTERNET FAX SPECIFYING A NETWORK FOLDER A network folder on a server or computer connected to the same network as the machine can be directly specified. Select [Direct SMTP] in step 2 on the previous page and follow the steps below. Touch the [Browse] key.
Page 506
SCANNER/INTERNET FAX Access the network folder. (1) Touch the key of the workgroup that you Select workgroup. Search wish to access. Workgroup Cancel Workgroup Name Work 1 Work 2 Work 3 Work 4 Work 5 Work 6 (2) Touch the key of the server or computer that you wish to access.
SCANNER/INTERNET FAX RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK When a LDAP server is configured in the Web pages, you can look up an address in a global address book and retrieve the address for Scan to E-mail or Internet fax transmission (excluding Direct SMTP addresses). Open the global address search screen.
Page 508
SCANNER/INTERNET FAX Select the destination. (1) Touch the key of the desired destination. Condition If no names are found that match the search characters, a Settings Detail message will appear. Touch the [OK] key to close the Address Review XXX AAA AAA@xx.xxx.com message and touch the [Search Again] key to search Search Again...
SCANNER/INTERNET FAX USING THE RESEND FUNCTION The destinations of the most recent 8 transmissions by Scan to E-mail, Internet fax (including Direct SMTP addresses) and/or fax are stored. One of these can be selected to resend to that destination. Touch the [Resend] key. Ready to send.
SCANNER/INTERNET FAX TRANSMITTING AN IMAGE SENDING AN IMAGE IN SCAN MODE This section explains the basic procedure for transmission in scan mode (Scan to E-mail, Scan to FTP, Scan to Desktop, and Scan to Network Folder). When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added.
Page 511
SCANNER/INTERNET FAX Specify the destination. (1) Touch the [Address Book] key in the base screen. Condition Settings AAA AAA BBB BBB For the [Address Book] key, see "BASE SCREEN" (page Address Review CCC CCC DDD DDD 5-9). Address Entry EEE EEE FFF FFF Global (2) Touch the one-touch key of the desired...
Page 512
SCANNER/INTERNET FAX Check the original scan size and placement orientation. Scan/Original To make sure that the original is scanned in the correct orientation (the orientation in which the top edge of the original Scan Size 100% Send Size appears at the top of the display), check the size and Auto orientation of the original placed in step 1.
Page 513
SCANNER/INTERNET FAX Touch the [Read-End] key. Place next original. (Pg.No.x) A beep will sound to indicate that the operation is completed. Press [Start]. Open the automatic document feeder and remove the original. When finished, press [Read-End]. Configure Read-End • If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the transmission is reserved.
SCANNER/INTERNET FAX CHANGING THE SUBJECT, FILE NAME, REPLY-TO, AND BODY TEXT The subject, file name, reply-to, and body text can be changed when performing a scan transmission. Preset items can be selected or text can be directly entered. • When performing Scan to FTP, Scan to Desktop, or Scan to Network Folder, only the file name is used. •...
Page 515
SCANNER/INTERNET FAX To change the file name, touch the [File Send Settings Name] key. Subject Sub: Schedule coordination meeting • The file name is entered in the same way as the subject. • If you are sending to a Scan to FTP, Scan to Desktop, or File Name Scan to Network Folder destination, go to step 9.
Page 516
SCANNER/INTERNET FAX To change the body text, touch the Send Settings [Body Text] key. Subject Sub: Schedule coordination meeting File Name Material for planning meeting Reply-To AAA AAA Body Text Add 'Reply to' to Cc Enter the body text and touch the [OK] Clear All Body Entry key.
SCANNER/INTERNET FAX SENDING AN IMAGE IN USB MEMORY MODE Follow the steps below to send a scanned image to a commercially available USB memory device that has been connected to the machine. This stores the file in the USB device. •...
Page 518
SCANNER/INTERNET FAX Switch to USB memory mode and display the image settings screen. Scan Internet Fax USB Mem. Scan PC Scan (1) Touch the [USB Mem. Scan] tab Original Scan: Send: Auto If the [USB Mem. Scan] tab does not appear, touch the File Name Exposure Auto...
Page 519
SCANNER/INTERNET FAX Press the [COLOUR START] key or the [BLACK & WHITE START] key. Scanning begins. • If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page, go to step 7.
Page 520
SCANNER/INTERNET FAX When "Sending data has been completed." appears in the touch panel, disconnect the USB memory. Do not disconnect the USB memory while "Processing data." or "Sending data." appears in the touch panel. • When transmission to USB memory is completed, "Sending data has been completed." is displayed. After a brief interval the message is cleared and the base screen of image send mode reappears.
SCANNER/INTERNET FAX ENTERING A FILE NAME The file name can be directly entered when performing a scan transmission. • If the file name is not entered, the settings in the Web page are used. • For the procedure for entering text, see "ENTERING TEXT"...
SCANNER/INTERNET FAX SENDING A FAX IN INTERNET FAX MODE The basic procedure for sending a fax in Internet fax mode is explained below. This procedure can also be used to perform direct transmission by Direct SMTP. When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added.
Page 523
SCANNER/INTERNET FAX Switch to Internet fax mode and display (1) (2) the image settings screen. Scan Internet Fax USB Mem. Scan PC Scan (1) Touch the [Internet Fax] tab. Address Book Original Scan: Send: Auto Address Entry Exposure Auto (2) Touch the [Original] key. Send Settings Resolution 200X100dpi...
Page 524
SCANNER/INTERNET FAX Touch the [Read-End] key. Place next original. (Pg.No.x) A beep will sound to indicate that the operation is completed. Press [Start]. Open the automatic document feeder and remove the original. When finished, press [Read-End]. Read-End Configure • If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the transmission is reserved.
SCANNER/INTERNET FAX CHANGING THE SUBJECT, FILE NAME, AND BODY TEXT The subject, file name, and body text can be changed when performing an Internet fax transmission. Preset items can be selected or text can be directly entered. • If the subject and file name are not changed, the settings in the Web page are used. •...
Page 526
SCANNER/INTERNET FAX To change the file name, touch the [File Send Settings Name] key. Subject Sub: Schedule coordination meeting The file name is entered in the same way as the subject. File Name Body Text To change the body text, touch the Send Settings [Body Text] key.
Page 527
SCANNER/INTERNET FAX Touch the [OK] key. Send Settings Subject Sub: Schedule coordination meeting File Name Material for planning meeting Body Text Thank you for your continuous support. We have attached sca When storing pre-set text for the subject and file name in the Web pages, up to 80 characters can be entered. System Settings (Administrator): The Number of File Name/Subject/Body Keys Displayed Setting The setting for the number of subject keys and file name keys displayed in one screen can be changed to 6, 12, or 18.
SCANNER/INTERNET FAX SENDING THE SAME IMAGE TO MULTIPLE DESTINATIONS (Broadcast Transmission) The same scanned image can be sent to multiple scan modes, Internet fax mode, and fax mode destinations in a single operation. Up to 500 destinations can be selected in one broadcast operation. Transmission Originals If you frequently use broadcasting to send images to the same group of destinations, it is convenient to store those...
Page 529
SCANNER/INTERNET FAX Specify the destination. (1) Touch the [Address Book] key in the base Condition screen. Settings BBB BBB AAA AAA For the [Address Book] key, see "BASE SCREEN" (page Address Review CCC CCC DDD DDD 5-9). Address Entry EEE EEE FFF FFF Global (2) Touch the one-touch key of the desired...
Page 530
SCANNER/INTERNET FAX Press the [COLOUR START] key or the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. •...
SCANNER/INTERNET FAX BROADCAST TRANSMISSIONS THAT INCLUDE INTERNET FAX DESTINATIONS When a broadcast transmission includes both scan mode and Internet Fax mode destinations, the Internet Fax mode settings (original orientation and other various settings) are given priority. When performing this type of broadcast transmission, note the information below.
Page 532
SCANNER/INTERNET FAX Display details on the broadcast transmission. Print Job Internet Fax Scan to Fax Job (1) Touch the key of the completed broadcast Address Start Time Pages Status Broadcast0001 10:00 04/01 010/003 NG000000 Job Queue transmission. 10:05 04/01 001/001 Send OK Complete Broadcast0002 Broadcast0003...
SCANNER/INTERNET FAX SENDING AN INTERNET FAX FROM A COMPUTER (PC-I-Fax) A file on a computer can be sent via the machine as an Internet fax (PC-I-Fax function). Internet faxes are sent using the PC-I-Fax function in the same way as documents are printed. Select the PC-Fax driver as the printer driver for your computer and then select the Print command in the software application.
SCANNER/INTERNET FAX IMAGE SETTINGS Settings for scanning the original are selected in the base screen of each mode. The current state of each setting appears to the right of the key used to select the setting. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original...
SCANNER/INTERNET FAX AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) The automatic document feeder can be used to automatically scan both sides of an original. Scan transmission 2-sided original Front and reverse sides are scanned Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use.
SCANNER/INTERNET FAX SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE When the original is placed, the original size and the send size set in the system settings appear in the base screen as the original size and send size. Scan Internet Fax USB Mem.
Page 537
SCANNER/INTERNET FAX Specifying the original scan size (by paper size) If the size of the placed original is different from the displayed original size or you wish to change the original size, you must touch the [Original] key and directly specify the original size. Place the original in the document feeder tray or on the document glass and follow the steps below.
Page 538
SCANNER/INTERNET FAX Specifying the original scan size (by numerical values) When scanning a non-standard size original such as a card, follow these steps to specify the original size. Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use. (2) Touch the [Original] key.
Page 539
SCANNER/INTERNET FAX Enter the scan size (original size). (1), (2) (1) Enter the X (horizontal) dimension of the Scan/Original original. Size Input Cancel Touch the X (width) numeric value display key to open a number entry screen. Enter the width of the original with (50 356) the numeric keys, and touch the [OK] key in the number (50 216)
Page 540
SCANNER/INTERNET FAX Specifying the send size of the image Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If a send size smaller than the scan size is selected, the image will be reduced. •...
Page 541
SCANNER/INTERNET FAX Specify the orientation in which the original is placed. Scan/Original (1) Touch the appropriate [Image Orientation] Scan Size 141% Send Size key. If this setting is not correct when sending an image with a changed ratio, a suitable image may not be transmitted. Image Orientation (2) Touch the [OK] key.
SCANNER/INTERNET FAX CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE The exposure and original image type can be set appropriately for the original to enable optimum scanning. Refer to the following tables to select appropriate settings. How to select the exposure Exposure When to select Auto...
Page 543
SCANNER/INTERNET FAX Select the exposure and original image type. Scan mode, USB memory mode, Data entry mode (1) Select the original image type. Touch the original image type key that matches the Scan/Exposure original image type. Auto (2) Adjust the exposure with the keys.
SCANNER/INTERNET FAX CHANGING THE RESOLUTION The resolution setting can be selected. Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use. (2) Touch the [Resolution] key. ☞ IMAGE SETTINGS (page 5-52) Select the resolution.
For normal text originals, 200X200dpi (200X100dpi in Internet fax mode) produces an image that is sufficiently legible. For photos and illustrations, a high resolution setting (600X600dpi, etc.) will produce a sharp image. However, a high resolution setting will result in a large file, and if the file is too large, transmission may not be possible. In this event, reduce the number of pages scanned or take other measures to decrease the file size.
Page 546
SCANNER/INTERNET FAX Set the format. ● Scanning in Mono2 (1) Select the file type. (2) Select the compression mode. Scan/File Format File Type Compression Mode TIFF None Encrypt PDF MH (G3) Programmed MMR (G4) Colour/Grey (1-99) Specified Pages per File ●...
Page 547
SCANNER/INTERNET FAX To change the number of pages per file, enter the number of pages and exit the Scan/File Format format settings. File Type Compression Ratio (1) Touch the [Specified Pages per File] TIFF checkbox so that a checkmark appears. Encrypt PDF Medium Programmed...
Page 548
SCANNER/INTERNET FAX Changing the format (Internet fax mode) The file format for sending an Internet fax is normally set to [TIFF-F]. If the destination Internet fax machine does not support full mode (it only supports simple mode), follow the steps below to select [TIFF-S]. Switch to Internet fax mode and display the file format settings screen.
SCANNER/INTERNET FAX CHANGING THE COLOUR MODE This procedure is used to change the colour mode used to scan the original when the [COLOUR START] key or the [BLACK & WHITE START] key is pressed. This function cannot be used in Internet fax mode. Start key Mode Scanning method...
SCANNER/INTERNET FAX CHECKING THE IMAGE TO BE TRANSMITTED (Preview) If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before sending the image. * The factory default setting is disabled. Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel.
SCANNER/INTERNET FAX PREVIEW CHECK SCREEN This section explains the preview check screen. Preview Sender Info Function Rev. Display Rotation Start Sending 0001 /0010 Preview image [Sender Info] key A preview of the scanned original appears. When Internet fax mode is selected, touch to display the If the image is cut off, use the scroll bars at the right and sender information for I-fax own address send.
SCANNER/INTERNET FAX SPECIAL MODES This section explains special modes that can be used in scan send mode. SPECIAL MODES When the [Special Modes] key is touched in the base screen, the special modes menu screen appears. When the [OK] key is touched in the special modes screen, the selected settings are entered and the base screen reappears. ☞...
Page 553
SCANNER/INTERNET FAX Internet fax mode The keys explained below can only be used in Internet fax mode. The other keys are the same as those explained in "Scan mode, USB memory mode, Data entry mode" (page 5-70). Internet Fax/Special Modes Program Erase Timer...
SCANNER/INTERNET FAX STORING SCAN OPERATIONS (Programs) A destination, original settings, and functions can be stored in a program. When you wish to use those settings to send an image, they can be retrieved with ease. For example, suppose A4 (8-1/2" x 11") size documents are scanned into a file and sent to each branch office once a month. (1) The same documents are sent to each branch office (2) Smudges on the edges of the documents are erased before transmission When a job program is not stored...
Page 555
SCANNER/INTERNET FAX Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Program] key. ☞ SPECIAL MODES (page 5-70) Retrieve the stored program. (1) Touch the desired program key. Program (2) Touch the [OK] key. Program 1 Program 2 Program 3 Program 4...
SCANNER/INTERNET FAX ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function does not detect shadows and will eliminate everything appearing in the erase area - including shadows, text and images.) Scanning a thick book Not using the erase Using the erase...
Page 557
SCANNER/INTERNET FAX Select the erase settings. (1) Touch the desired erase mode. Scan/Special Modes Select one of the 2 erase modes. Cancel Erase Touch the [Side Erase] key to open the following screen. Erase Edge Edge Erase Side Erase Cancel (0~20) Erase position for Original Side 2...
SCANNER/INTERNET FAX SENDING AN IMAGE AT A SPECIFIED TIME (Timer Transmission) This function lets you specify a time at which a transmission or broadcast transmission will automatically take place. Transmission begins automatically at the specified time. Set a transmission to At 20:00, the transmission take place at 20:00 begins automatically...
Page 559
SCANNER/INTERNET FAX Set the time with the keys. (1) Specify the day. Scan/Special Modes If you do not wish to specify a day, select [---]. In this Cancel Timer case, transmission will begin when the time specified in (2) arrives. Time Day of the Week (2) Specify the time (hour, minute)
SCANNER/INTERNET FAX SCANNING BOTH SIDES OF A CARD ONTO A SINGLE PAGE (Card Shot) This function lets you send the front and reverse sides of a card as a single page, without the need to send each side separately. Scanned image Originals Transmission Front...
Page 561
SCANNER/INTERNET FAX Specify the original size. (1) Enter the original size. Scan/Special Modes • Touch the X (width) numeric value display key and Card Shot Cancel enter the width. Fit to • Touch the Y (height) numeric value display key and Send Size (25~210) enter the height.
Page 562
SCANNER/INTERNET FAX Touch the [Read-End] key. Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Configure Read-End If you will continue scanning additional cards, you can touch the [Configure] key to change the exposure, resolution, scan size, and send size. The ratio cannot be specified and "Rotation Sending Setting"...
SCANNER/INTERNET FAX SCANNING MANY ORIGINALS AT ONCE (Job Build) This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic document feeder, and transmit the pages in a single transmission. Use this function when the number of originals that you wish to scan exceeds the maximum number of sheets that can be inserted in the automatic document feeder at once.
Page 564
SCANNER/INTERNET FAX Select job build mode. (1) Touch the [Job Build] key so that it is Scan/Special Modes Scan/Special Modes highlighted. Program Program Erase Erase Timer Timer (2) Touch the [OK] key. Mixed Size Mixed Size Card Shot Card Shot Build Original Original...
SCANNER/INTERNET FAX SCANNING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original) Originals that are A4 size and A5 size (8-1/2" x 11" size and 5-1/2" x 8-1/2" size), 8-1/2" x 14" size and 8-1/2" x 11" size can be placed together in the automatic document feeder and scanned. When scanning the originals, the machine automatically detects the size of each original.
Page 566
SCANNER/INTERNET FAX Insert the originals face up in the document feeder tray. Place the originals with the sides that are the same length aligned on the left. Place with the sides that are the same length aligned on the left. Inch 8-1/2"...
SCANNER/INTERNET FAX Select the mixed size original setting. (1) Touch the [Mixed Size Original] key so that Scan/Special Modes it is highlighted. Program Erase Timer (2) Touch the [OK] key. Mixed Size Card Shot Build Original Slow Scan Original File Mode Count Suppress...
Page 568
SCANNER/INTERNET FAX SCANNING THIN ORIGINALS (Slow Scan Mode) Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent thin originals from misfeeding. When using USB memory mode, connect the USB memory device to the machine before performing the procedure below. Insert the originals face up in the document feeder tray.
Page 569
SCANNER/INTERNET FAX Select slow scan mode. (1) Touch the [Slow Scan Mode] key so that it is Scan/Special Modes Scan/Special Modes highlighted. Program Program Erase Erase Timer Timer (2) Touch the [OK] key. Mixed Size Card Shot Card Shot Build Build Original Slow Scan...
SCANNER/INTERNET FAX CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE TRANSMISSION (Original Count) The number of scanned original sheets can be counted and displayed before transmission. Checking the number of scanned original sheets before transmission helps prevent transmission mistakes. • This function cannot be used in USB memory mode. •...
Page 571
SCANNER/INTERNET FAX Press the [COLOUR START] key or the [BLACK & WHITE START] key. Scanning begins. To cancel scanning... Press the [STOP] key ( ) to cancel the operation. All scanned data will be cleared. When scanning ends, check the number of original sheets scanned and touch the [OK] key.
SCANNER/INTERNET FAX ELIMINATING BLANK PAGES FROM A TRANSMISSION (Blank Page Skip) When blank pages are included in originals scanned using the automatic document feeder, the blank pages can be detected and automatically eliminated from transmission. Blank pages are not sent Blank pages Send •...
Page 573
SCANNER/INTERNET FAX Set blank page skipping. (1) Select the type of blank page to be skipped. Scan/Special Modes Select from two types. Cancel Blank Page Skip To include blank pages on which the content on the opposite side shows through, touch [Skip Blank and Back Shadow].
SCANNER/INTERNET FAX SCAN THE ORIGINAL DELETING THE COLOURED PORTIONS (Drop Out Colour) The original's coloured portions (portions other than black) can be erased. ABCD abcd abcd 1234 1234 5678 1234 5678 Original Scan data with colour erased • This feature can only be used when set to [Mono2] in [Colour Mode]. •...
Page 575
SCANNER/INTERNET FAX Select drop out colour mode. (1) Touch the [Drop Out Colour] key so that it is Scan/Special Modes highlighted. Program Erase Timer (2) Touch the [OK] key. Mixed Size Card Shot Build Original Slow Scan Original File Mode Count Suppress Drop Out...
SCANNER/INTERNET FAX WHITENING FAINT COLOURS IN THE IMAGE (Suppress Background) This feature is used to suppress light background areas. Level [+] The lightness level at which suppression takes place can be adjusted. Level [-] • This function cannot be used in Internet fax mode. •...
Page 577
SCANNER/INTERNET FAX Select the suppress background setting. (1) Adjust the background suppression level. Scan/Special Modes Touch the [+] key to suppress only faint background. Cancel Suppress Background Touch the [-] key to suppress faint to dark background. Light areas of the original may be suppressed as background. (2) Touch the [OK] key.
SCANNER/INTERNET FAX CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT (Transaction Report) A transaction report is automatically printed out to alert you when an Internet fax transmission fails or when a broadcast transmission is performed. The transaction report contains a description of the transmission (date, start time, name of other party, time required, number of pages, result, etc.).
Page 579
SCANNER/INTERNET FAX Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK &...
SCANNER/INTERNET FAX CHECKING THE STATUS OF TRANSMISSION/RECEPTION JOBS This section explains how to check the status of reserved transmission jobs and received Internet faxes. JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode.
SCANNER/INTERNET FAX JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of two screens: the job queue screen that shows reserved jobs and the job currently in progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key ((2) below).
Page 582
SCANNER/INTERNET FAX Job key display The following information is shown in the job queue keys and completed job keys that appear in the job status screen. Direct SMTP information is also included in Internet fax transmission/reception information. AAA AAA 10:22 04/01 000/004 Waiting (1) (2) Displays the number (position) of the job in the job queue.
Page 583
SCANNER/INTERNET FAX • Completed job Display Status "Send OK" Transmission was completed. "In Memory" An Internet fax has been received but has not yet been printed. "Received" A received Internet fax has been printed or deleted in the check image screen. "Forward OK"...
SCANNER/INTERNET FAX OPERATION WHEN A JOB IN THE JOB QUEUE IS COMPLETED When a normal transmission job is completed, it moves to the completed jobs screen and "Send OK" appears in the status column. Received Internet faxes, timer transmission jobs, and forwarding jobs are handled in the job status screen as explained below.
SCANNER/INTERNET FAX CHECKING COMPLETED JOBS You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on completed jobs that used document filing function, broadcast transmission jobs, and received Internet fax forwarding jobs. Touch the key of the job for which you wish to display information in the completed jobs screen and touch the [Detail] key.
SCANNER/INTERNET FAX STOPPING A SCAN JOB BEING TRANSMITTED OR WAITING TO BE TRANSMITTED Follow the steps below to stop a job that is being transmitted or is waiting to be transmitted. Press the [JOB STATUS] key. JOB STATUS Select the job that you wish to stop. (1) Touch the mode tab of the job to be Print Job Internet Fax...
SCANNER/INTERNET FAX GIVING PRIORITY TO A SCAN TRANSMISSION JOB When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If you need to give priority to a job and send it ahead of the other jobs, follow the steps below. Press the [JOB STATUS] key.
SCANNER/INTERNET FAX CHECKING THE INTERNET FAX ACTIVITY LOG (Image Sending Activity Report) IMAGE SENDING ACTIVITY REPORT You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred. The most recent 200 transactions are included in the report.
SCANNER/INTERNET FAX INTERNET FAX RECEPTION FUNCTIONS This section explains the basic procedures for receiving Internet faxes. RECEIVING AN INTERNET FAX The Internet fax function periodically* connects to the mail server (POP3 server) and checks whether or not Internet faxes have been received. When faxes have been received, the faxes are automatically retrieved and printed. * The default setting is once every 5 minutes.
SCANNER/INTERNET FAX MANUALLY RECEIVING INTERNET FAXES If the interval for checking for received faxes is somewhat long and you wish to check immediately, you can manually initiate reception. Touch the [I-Fax Manual Reception] key to connect to the mail server and retrieve received faxes. Scan Internet Fax USB Mem.
SCANNER/INTERNET FAX PRINTING A PASSWORD-PROTECTED FAX (Hold Setting For Received Data Print) "Hold Setting for Received Data Print" in the system settings (administrator) can be enabled to have faxes received to memory without being printed. To print the faxes, a password must be entered. When this function is enabled, a password entry screen appears in the touch panel when received Internet faxes are retrieved.
SCANNER/INTERNET FAX CHECKING THE IMAGE BEFORE PRINTING When "Received Data Image Check Setting" is enabled* in the system settings (administrator), you can check a received image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a received image.
SCANNER/INTERNET FAX IMAGE CHECK SCREEN This section explains the image check screen. Back Image Check AAA AAA 04/04/2010 10:28 1 / 3 Display Rotation Print 0001 0010 Information display "Display Rotation" key This shows information on the displayed image. This rotates the image right or left by 90 degrees. The rotation applies to all pages in the file, not just the Preview image displayed page.
SCANNER/INTERNET FAX FORWARDING RECEIVED INTERNET FAXES TO A NETWORK ADDRESS (Inbound Routing Settings) Received Internet faxes can be automatically forwarded to an e-mail address, file server address, desktop address, or network folder address. When this function is enabled, you can also have received Internet faxes forwarded without printing them. The machine Forwarding Received Internet fax...
Page 595
SCANNER/INTERNET FAX Enabling the inbound routing function. (1) In the Web page menu, click [Application Settings], [Inbound Routing Settings], and then [Administration Settings]. (2) Select [Enable] in "Inbound Routing" and click the [Submit] button. Users without administrator rights can be prohibited from storing, editing, and deleting forwarding tables in this screen, and from specifying which table is used.
Page 596
SCANNER/INTERNET FAX Store a forwarding table. Follow the steps below to store a forwarding table that combines a specified sender and forwarding address. (1) Click [Inbound Routing Settings] in the Web page menu and click the [Add] button. (2) Enter a "Table Name". (3) Select the line used for reception.
Page 597
SCANNER/INTERNET FAX Specifying forwarding tables to be used. To use the inbound routing function, enable the forwarding tables that you wish to use from among the stored tables. (1) Click [Inbound Routing Settings] in the Web page menu. (2) Select [Always Forward] or [Forward on Selected Day &...
SCANNER/INTERNET FAX SCANNING FROM A COMPUTER (PC Scan Mode) BASIC SCANNING PROCEDURE You can install the scanner driver on your computer from the CD-ROM that accompanies the machine, and use a TWAIN* compliant application to scan an image using your computer. Scanning from your computer is most useful for scanning a single original such as a photo, particularly when you want to adjust scan settings as you scan.
Page 599
[Select Scanner] from the [File] menu. Select the scanner driver of the machine. (1) Select [SHARP MFP TWAIN V]. (2) Click the [Select] button. Select [Acquire Image] from the [File] menu. The scanner driver opens.
Page 600
SCANNER/INTERNET FAX Preview the image. (1) Select the location where the original is placed. "Scanning Source" menu: • If the original is a one-sided original and is placed in the document feeder tray, select [SPF(Simplex)]. • If the original is a 2-sided original and is placed in the document feeder tray, select [SPF(Duplex - Book)] or [SPF(Duplex - Tablet)] depending on whether the original is a book-style or tablet-style original.
SCANNER/INTERNET FAX Select scanning settings while viewing the image. [Rotate] button: Each time this button is clicked, the preview image rotates 90 degrees. This lets you change the orientation of the image without picking up and placing the original again. The image file will be created using the orientation that appears in the preview window.
Page 602
SCANNER/INTERNET FAX [At the machine] Touch the [Exit] key in the touch panel. This machine is in the PC scan mode. Do not remove the original. Scanner IP address:250.160.102.106 Exit Touch the [Yes] key. PC scan in progress. Finish PC scan mode? 5-120 Contents...
SCANNER/INTERNET FAX METADATA DELIVERY This section explains metadata delivery, which can be used when the application integration module kit is installed. METADATA DELIVERY (Data Entry) When the application integration module kit is installed and an image file is generated for a scan send transmission, metadata (data indicating the attributes of the image file and how it is to be processed) can be generated based on pre-stored information and transmitted as a separate file.
SCANNER/INTERNET FAX PREPARATIONS FOR METADATA TRANSMISSION SETTINGS REQUIRED IN THE WEB PAGES All settings related to metadata are configured in the Web pages. (Administrator rights are required.) To configure metadata settings, click [Application Settings] and then [Metadata Settings] in the Web page menu. When configuring settings, be sure to enable metadata transmission.
SCANNER/INTERNET FAX TRANSMITTING METADATA Follow the steps below to select a metadata set, enter each item, and perform metadata transmission. Switch to data entry mode and display the metadata set screen. Scan Internet Fax Data Entry (1) Touch the [Data Entry] tab. Address Book Original Scan:...
Page 606
SCANNER/INTERNET FAX Enter the selected metadata item. (1) Touch the key of the value that you wish to Data Entry enter. Cancel User ID • When the entry values of the metadata item are in the Direct Entry form of selections, the selections are shown as keys. Value 1 Value 2 When a value is editable, you can touch the [Direct...
SCANNER/INTERNET FAX METADATA FIELDS The following three types of metadata are included in the XML file that is transmitted. • Data automatically generated by the machine: These data are always included in the XML file and are automatically stored on your computer. •...
SCANNER/INTERNET FAX NETWORK SCANNER / INTERNET FAX* SPECIFICATIONS 100 x 100, 200 x 200, 300 x 300, 400 x 400, 600 x 600 Scanning resolution (dpi) Internet Fax: 200 x 100, 200 x 200, 200 x 400, 400 x 400, 600 x 600 (200 x 100, 200 x 200 when file type is TIFF-S) Halftone can be selected for resolutions other than 200 x 100 dpi.
SCANNER/INTERNET FAX PULL SCAN FUNCTION (TWAIN) SPECIFICATIONS Supported protocol TCP/IP (IPv4) Supported client PC Windows 2000 / XP / Server 2003 / Vista / Server 2008 / 7 operating systems Colour modes Full Colour, Greyscale, Mono Diffusion, Mono 2 gradation 75 dpi, 100 dpi, 150 dpi, 200 dpi, 300 dpi, 400 dpi, 600 dpi Resolution settings (The resolution can be specified by entering a numerical value from 50 to 9600 dpi.
Page 610
CHAPTER 6 DOCUMENT FILING This chapter provides detailed explanations of the procedures for using the document filing function. The document filing function allows you to save the document data of a copy or fax job, or the data of a print job, as a file on the machine's hard drive.
DOCUMENT FILING DOCUMENT FILING This section provides information that you should know before using the document filing function, including an overview of document filing, the features and functions of document filing, and points to keep in mind when using document filing. OVERVIEW The document filing function allows you to save the document image of a copy or image send job, or the data of a print job, as a file on the machine's hard drive.
DOCUMENT FILING USES OF DOCUMENT FILING Quickly using a file Example: You prepared handouts consisting of numerous pages for a meeting, however, another handout is needed for a newly added participant. The handout was not saved using document filing The handout was saved using document filing Ratio, colour mode, and special mode settings must be reselected.
DOCUMENT FILING BEFORE USING DOCUMENT FILING This section provides information that you should know before using the document filing function. Folders Three types of folders are used to store files by document filing. Folders on the hard drive Main Folder Quick File Folder Custom Folder...
Page 614
DOCUMENT FILING Approximate number of pages and files that can be stored by document filing Combined total number of pages and total number of files that can be stored in custom folders and in the Main folder Examples of original types Number of pages* Number of files Full colour...
Page 615
DOCUMENT FILING Automatic deletion of files You can have document filing data in specified folders automatically deleted at regular intervals by specifying the folders and the time. Periodic deletion of files stored in the machine helps to prevent the leaking of sensitive information and frees space on the hard drive.
Do not store sensitive documents or documents that you do not want to be used by others. • Except in cases provided for by law, SHARP Corporation bears no responsibility for any damages that result from the leaking of sensitive information due to manipulation by a third party of any data saved using the Quick File function or File function, or incorrect operation of the Quick File function or File function by the operator that saves the data.
DOCUMENT FILING USING DOCUMENT FILING IN EACH MODE In copy or image send mode, the original can be saved as a file on the hard drive at the same time it is copied or transmitted. In addition, Scan to HDD can be used to save the scanned data of an original to the hard drive without copying or transmitting the data.
Page 618
DOCUMENT FILING Scan to HDD mode The scanned original is saved as an image file. Neither printing nor transmission are performed when Scan to HDD is used. (1) Touch the [DOCUMENT FILING] key. (2) Touch the [Scan to HDD] tab. DOCUMENT COPY IMAGE SEND...
DOCUMENT FILING BASE SCREEN OF DOCUMENT FILING MODE Touch the [DOCUMENT FILING] key in the touch panel to open the base screen of document filing mode. Files stored on the hard drive in the machine can be retrieved from this screen. When user authentication is used and My Folder is configured, the file selection screen of My Folder will appear.
DOCUMENT FILING SAVING FILES WITH DOCUMENT FILING This section explains how to save an original as an image file using the Quick File, File, and Scan to HDD functions of document filing mode. SAVING A FILE WITH "Quick File" When copying, printing or transmitting a document in copy mode, print mode, or image send mode (excluding USB memory scan mode), "Quick File"...
Page 621
DOCUMENT FILING Touch the [OK] key. Scanned data is automatically stored You will return to the base screen of copy mode and the [Quick in the quick file folder. Do not store File] key will be highlighted. confidential data to the folder. To cancel Quick File...
DOCUMENT FILING SAVING A FILE WITH "File" When copying, printing or transmitting a document in copy mode, print mode, or image send mode (excluding USB memory scan mode), "File" can be selected to save an image of the document to the Main folder or a previously created custom folder.
Page 623
DOCUMENT FILING Select copy settings and then press the [COLOUR START] key or the [BLACK & WHITE START] key. • Copying begins and the scanned document image is saved to the hard drive. The selected copy settings are also saved. •...
DOCUMENT FILING FILE INFORMATION This section explains the settings that are configured in step 3 of "SAVING A FILE WITH "File"" (page 6-13). Specifying a user name, file name, folder, and confidential setting makes it easier to manage and search for a file. In addition, when confidential is selected and a password is established, other people will not be able to view the file without permission.
Page 625
DOCUMENT FILING Assigning a file name A file name can be assigned to the file. Touch the [File Name] key. File Information Cancel A text entry screen will appear. Enter the file name and touch the [OK] key. Confidential A maximum of 30 characters can be entered. Password User Name User Unknown...
Page 626
DOCUMENT FILING Storing a file as a confidential file A password can be set for the file to prevent others from viewing it. Set a password (5 to 8 digits) with the numeric keys. Enable the confidential property. (1) Select the [Confidential] checkbox so that a File Information Cancel checkmark...
DOCUMENT FILING SAVING A DOCUMENT FILE ONLY (Scan to HDD) Scan to HDD is used to store a scanned document in the Main folder or a custom folder. Neither printing nor transmission are performed. "Scan to HDD" SCREEN The following screen appears when the [Scan to HDD] tab is touched in document filing mode. Touch the keys below to select Scan to HDD settings.
Page 628
DOCUMENT FILING [Original] key When the [Original] key is touched, the following screen appears. This screen is used to change the original size and select scanning settings for 2-sided originals. Scan to HDD/Original Scan Size 100% Store Size Auto Original Image Orientation 2-Sided 2-Sided...
Page 629
DOCUMENT FILING [Colour Mode] key Touch the [Colour Mode] key to open the colour mode setting screen for Scan to HDD. Scan to HDD/Colour Mode Colour Mode Full Colour Auto Colour Mode 2 Colour B/W Mode Mono2 Greyscale The following settings can be selected for the scanning colour when the [COLOUR START] key or the [BLACK & WHITE START] key is pressed.
Page 630
DOCUMENT FILING Special modes screen for Scan to HDD When the [Special Modes] key is touched, the following screen appears. For more information on each setting, see "SPECIAL MODES" (page 5-70) in "5. SCANNER / INTERNET FAX". Scan to HDD/Special Modes Erase Card Shot Build...
Page 631
DOCUMENT FILING Checking the image before storing it (Preview) If you touch the [Preview] key and then start Scan to HDD, the screen below appears. Before the scanned data is stored, you can check a preview of the scanned image in this screen and return to the Scan to HDD settings screen to change settings Reset Preview...
DOCUMENT FILING PERFORMING "Scan to HDD" Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Placing the original on the document glass Portrait original Align the top edge of the original against the side of the document glass with the scale.
Page 633
DOCUMENT FILING When Scan to HDD is performed without appending file information, the following user name and file name are automatically assigned to the file. User Name: User Unknown File Name: Mode_Day-Month-Year_Hour-Minute-Second (Example: HDD_04042010_112030) Stored to: Main Folder When user authentication is used, the user name that was used for login is automatically selected. 6-24 Contents...
DOCUMENT FILING USING STORED FILES This section explains how to retrieve a file stored by document filing and print or transmit the file. SEQUENCE FOR USING A STORED FILE This section explains the basic procedure for retrieving and using a stored file. The screens and procedures differ depending on whether or not user authentication is enabled.
Page 635
DOCUMENT FILING Select the file that you wish to retrieve. • Select the folder in the folder selection screen. File Retrieve Scan to HDD HDD Status Ex Data Access When the folder is selected, the files in the folder will Search Back Main Folder...
DOCUMENT FILING FOLDER AND FILE SELECTION SCREENS To use a file stored by document filing, the folder and file must be selected. The folder selection screen and file selection screen are explained below. FOLDER SELECTION SCREEN Two different screens appear depending on whether or not user authentication is enabled on the machine. When user authentication is not enabled When user authentication is enabled Search...
DOCUMENT FILING FILE SELECTION SCREEN The file selection screen of the Quick File folder, Main folder, and custom folders is explained below. The file selection screen can be displayed in "List screen" format or "Thumbnail screen" format. (To select the format, see "(5) [Switch Display] key"...
Page 638
DOCUMENT FILING [Multi-File Print] key Touch this to select multiple files in a folder for printing. ☞ MULTI-FILE PRINTING (page 6-34) Sort Order / Display Items This can be used in the thumbnail screen. The order of display of the file thumbnails can be changed in "Sort Order".
DOCUMENT FILING SELECTING A FILE This section explains how to select a file to be used. Select the folder that contains the file you wish to use. DOCUMENT COPY IMAGE SEND FILING (1) Touch the [DOCUMENT FILING] key. The folder selection screen will appear. If a different tab File Retrieve Scan to HDD HDD Status...
DOCUMENT FILING JOB SETTINGS SCREEN When a file key is touched, the following screen appears. Touch the key of the operation that you wish to perform and select settings. File Retrieve Scan to HDD HDD Status Ex Data Access Cancel Job Settings Search Back...
DOCUMENT FILING PRINTING A STORED FILE A file stored using document filing can be retrieved and printed when needed. The settings used when the file was stored are also stored, and thus the file can be printed again using those settings. The file can also be modified before printing by changing the print settings.
DOCUMENT FILING PRINT SETTINGS SCREEN Cancel Job Settings / Print file-01 Name 1 F. Colour Paper Select Number of Prints Auto Print and Delete the Data (1 999) Output Print and Save the Data 2-Sided Special Modes B/W Print [Paper Select] key Use this key to set the paper size.
DOCUMENT FILING MULTI-FILE PRINTING Multiple files in a folder can be selected for printing. Touch the [Multi-File Print] key. Search Back Main Folder To select files of a particular job type, touch the [Switch File Name User Name Date Display] key, select the job type from the screen that appears, file-01 Name 1 04/04/2010...
Page 644
DOCUMENT FILING Printing a selected file. (2) (3) The number of selected files appears in the number of selected Cancel Job Settings / Print files display. Number of Selected Files: 5 If you wish to use the number of copies that was stored with the file, go to step (3).
DOCUMENT FILING Batch printing All files in a folder that have the same user name and password can be printed at once. When the [Multi-File Print] key is touched, it changes into the [Batch Print] key. Touch the [Batch Print] key. Select All Back Multi-File Print...
Page 646
DOCUMENT FILING If a password has been established, Cancel Batch Print touch the [Password] key. User 1/ All Files Enter the password with the numeric keys (5 to 8 digits) and User Name Name 1 touch the [OK] key. Only files that have the same password will Password be selected.
DOCUMENT FILING SENDING A STORED FILE A file stored by document filing can be retrieved and transmitted whenever needed. The settings used when the file was stored are also stored, and thus the file can be transmitted using those settings. If needed, you can also change the transmission settings to modify the retrieved file.
DOCUMENT FILING SEND SETTINGS SCREEN The keys that appear in the send settings are explained below. For more information on each of the settings, see "BASE SCREEN OF FAX MODE" (page 4-7) in "4. FACSIMILE" and "BASE SCREEN" (page 5-9) in "5. SCANNER / INTERNET FAX".
DOCUMENT FILING PROPERTIES OF STORED FILES FILE PROPERTIES A protect setting can be selected for files saved with the document filing function. This prevents a file from being moved, or automatically or manually deleted. Three properties are available for saved files: [Sharing], [Protect], and [Confidential]. When saved with the [Sharing] property, a file is not protected.
Page 650
DOCUMENT FILING Restrictions on changing the property • A file that is set to "Sharing" can be changed to "Protect" or "Confidential". However, a "Sharing" file that is saved in the Quick File folder can only be changed to "Protect". •...
DOCUMENT FILING MOVING A STORED FILE Use this procedure to change the location of a file (move a file to a different folder). After selecting the desired file, follow the steps below. ☞ SELECTING A FILE (page 6-30) Touch the [Move] key. Cancel Job Settings file-01...
Page 652
DOCUMENT FILING Touch the [Move] key. Cancel Job Settings / Move file-01 Name 1 F. Colour Select the folder the file is moved to. File Name file-01 Move to: User 2 Move A file whose property is "Protect" cannot be moved. To move a protected file, change its property to "Sharing" or "Confidential".
DOCUMENT FILING DELETING A STORED FILE Stored files that are no longer needed can be deleted. Select the file that you wish to delete and touch the [Delete] key. ☞ SELECTING A FILE (page 6-30) Touch the [Delete] key. Cancel Job Settings file-01 Name 1...
DOCUMENT FILING CHECKING AN IMAGE OF A STORED FILE You can check an image of a file stored using document filing. Select the desired file and touch the [Image Check] key. ☞ SELECTING A FILE (page 6-30) Touch the [Image Check] key. Cancel Job Settings file-01...
DOCUMENT FILING IMAGE CHECK SCREEN This section explains the image check screen. Image Check Back file-01 Name 1 F. Colour Display Rotation Detail 0001 0010 Information display "Display Rotation" key This shows information on the displayed image. This rotates the image right or left by 90 degrees. The rotation applies to all pages in the file, not just the Preview image displayed page.
DOCUMENT FILING RETRIEVING AND USING A FILE FROM THE JOB STATUS SCREEN Files stored using File and Quick File appear as keys in the job status complete screen. This is convenient when you need to quickly print the saved data of a copy job or quickly send a saved fax to another destination.
DOCUMENT FILING SEARCHING FOR A STORED FILE When there are many stored files, it may take time to find a file. The search function of document filing mode can be used to find a file quickly. This section explains how to search for a file or folder on the machine's hard drive. Searching is possible even when you only know part of the file name or folder name.
Page 658
DOCUMENT FILING Using the user name to search (B)(D) There are four ways to select the user name: Cancel User Name (A) Touch the key of the user name. Name 2 The touched user name is highlighted. Name 1 If you accidentally select the wrong user name, touch the Name 3 Name 4 Default User...
Page 659
DOCUMENT FILING Touch the [Start Search] key. Search Cancel Start Search The search results will appear in a screen similar to the following screen. A list of the files that match your search User Name Name 1 criteria will appear. Select the desired file from the list. File or Folder Name file-01 The job settings screen will appear.
Page 660
DOCUMENT FILING Searching within a folder You can specify a folder to restrict the search range to that folder. To search within a specified folder, follow the steps below. Open the folder that you wish to search. (1) Touch the [DOCUMENT FILING] key. DOCUMENT COPY IMAGE SEND...
Page 661
DOCUMENT FILING Using the user name to search (B)(D) There are four ways to select the user name: Cancel User Name (A) Touch the key of the user name. Name 2 The touched user name is highlighted. Name 1 If you accidentally select the wrong user name, touch the Name 3 Name 4 Default User...
Page 662
DOCUMENT FILING Start searching. (1) Touch the [Search within Current Folder] Cancel Start Search Search checkbox so that it is selected To search only files that are in the current folder, select User Name Name 1 the [Search within Current Folder] checkbox File or Folder Name file-01 Use this method to search for a file in a confidential folder.
Page 663
CHAPTER 7 SYSTEM SETTINGS This chapter explains the system settings, which are used to configure a variety of parameters to suit the aims and needs of your workplace. The current selections that have been made for the settings can be viewed or printed out. To quickly check where a setting is located in the system settings menu, see "System Settings Menu"...
Page 664
Storing/Calling of System Settings ..7-100 Sharp OSA Settings ..... . 7-101 SYSTEM SETTINGS FOR FAX System Settings for Fax (General) List .
SYSTEM SETTINGS SYSTEM SETTINGS System Settings The system settings are used to configure a variety of parameters to suit the aims and needs of your workplace. The system settings are also used to display or print out the current settings and status of the machine. The system settings allow you to make the machine easier to use.
SYSTEM SETTINGS Common Operation Methods This section explains special operation methods that are common to all system settings. Be sure to read this section, as the information is omitted in the explanations of some of the individual settings. Example: Address book screen System Settings Back Address Book...
SYSTEM SETTINGS SYSTEM SETTINGS (GENERAL) This section describes the system settings that can be configured by general users of the machine. Accessing the System Settings (General) Make sure that the machine is in the standby state and then press the [SYSTEM SETTINGS] key on the JOB STATUS operation panel.
SYSTEM SETTINGS System Settings (General) List When the system settings are accessed with general rights, the following items appear. For items that can only be accessed with administrator rights, see "System Settings (Administrator) List" (page 7-34). • Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings. •...
Page 669
SYSTEM SETTINGS Paper Tray Settings Item Factory default setting Page 7-14 ■ Paper Tray Settings ● Tray Settings Tray 1 Tray 2* Plain, Auto-AB (Auto-Inch) Tray 3* 7-14 Tray 4* Bypass Plain, Auto-AB (Auto-Inch) Select Similar Sizes for Auto Detection Auto-AB: 216 mm x 330 mm (8-1/2"...
Page 670
SYSTEM SETTINGS Printer Condition Settings Item Factory default setting Page 7-25 ■ Printer Condition Settings ● Printer Default Settings Copies Orientation Portrait Default Paper Size A4 (8-1/2" x 11") Default Paper Type Plain Paper Initial Resolution Setting 600dpi (High Quality) Disable Blank Page Print Disabled Line Thickness...
Page 671
SYSTEM SETTINGS Document Filing Control Item Factory default setting Page 7-28 ■ Document Filing Control USB-Device Check Item Factory default setting Page – 7-29 ■ USB-Device Check User Control Item Factory default setting Page 7-30 ■ User Control* ● Amend User Information –...
SYSTEM SETTINGS Total Count This function shows the page count in each mode. Touch the [Total Count] key. Job Count This displays or prints out the counts of all jobs. • Each sheet of paper used for automatic two-sided copying is counted as two pages. •...
SYSTEM SETTINGS Default Settings The default settings for operation of the machine can be configured. Touch the [Default Settings] key and select the settings. Clock Adjust Use this to set the date and time in the machine's built-in clock. Set the time. Item Settings If your region is ahead of GMT (Greenwich Mean Time), select [+].
SYSTEM SETTINGS Date Format The format used to print the date on lists and other output can be changed. Item Settings Current Setting The current time appears in the format set in the date format settings. Format Set the order of display of the year, month, and day. Separator Select one of three symbols or a blank space for the separator used in the date.
SYSTEM SETTINGS List Print (User) Lists showing the settings and information stored in the machine can be printed. Touch the [List Print (User)] key and select the settings. List name Description This list shows the hardware status, software status, printer condition settings, paper All Custom Setting List tray settings, and total counts.
SYSTEM SETTINGS Paper Tray Settings Paper tray and paper type settings are explained in this section. Touch the [Paper Tray Settings] key to configure the settings. Tray Settings These settings specify the paper type, paper size, and functions allowed for each paper tray. When the [Tray Settings] key is touched, a list appears showing the trays and the current settings.
Page 677
SYSTEM SETTINGS Tray Settings Paper Tray Paper Type Size Tray 1 Plain, Pre-Printed, Auto-AB (A4, A5, B5, 216 mm x 330 mm (8-1/2" x 13")), Recycled, Letter Head, Auto-Inch (8-1/2" x 14", 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2"), Pre-Punched, Colour, 216 mm x 343 mm (8-1/2"...
SYSTEM SETTINGS Paper Type Registration Store a paper type when the desired paper type does not appear as a selection or when you wish to create a new set of paper properties. Up to 7 paper types can be stored. Item Description Store any name.
SYSTEM SETTINGS Address Control Address Control is used to store, edit, and delete one-touch keys, group keys, program keys, and custom indexes. Touch the [Address Control] key to configure the settings. • The settings that can be selected vary depending on the peripheral devices installed. •...
Page 680
SYSTEM SETTINGS Settings Item Description Items stored in all modes Select the type of address to be stored in the address book. • E-mail: Store an e-mail address in a one-touch key. • Internet Fax: Store an Internet fax address in a one-touch key. Address Type •...
Page 681
SYSTEM SETTINGS Item Description Items appearing when an Internet fax address is stored I-Fax Address Enter an Internet fax address (max. 64 characters). File Format Compression Mode: Select the compression mode for transmission. Select whether or not you wish to receive a reception report by e-mail after Request Internet Fax Reception Report transmission is completed.
Page 682
SYSTEM SETTINGS Storing group keys This section explains the procedure for storing group keys. Touch the [Address Control] key. System Settings Admin Password Exit List Print Total Count Default Settins (User) Paper Tray Fax Data Address Control Settings Receive/Forward Printer Condition Document Filing USB-Device Check Settings...
Page 683
SYSTEM SETTINGS Use the scroll bar to display the lower System Settings Address Control Cancel part of the screen, and touch the Search Number: 19 (1-999) [Address Book] key. (Touch the [Direct Group Name (Required): test Initial (Optional): Entry] key to store an address that is not Key Name: test Custom Index:...
SYSTEM SETTINGS The group key registration screen appears. If you want to finish, touch [Cancel] key to return to the previous screen. The procedure is complete. Custom Index The name of a custom index can be changed for greater ease of use. Delete the previously entered name and enter a new name (maximum of 6 characters).
SYSTEM SETTINGS Program If you frequently use the same settings and/or functions to transmit to the same destination or destinations, the settings and destinations can be stored in a program. This allows the settings and destinations to be selected by simply selecting the program.
SYSTEM SETTINGS Fax Data Receive/Forward This section explains settings for reception and forwarding. Touch the [Fax Data Receive/Forward] key and configure the settings. For explanations of settings related to the fax function, see "SYSTEM SETTINGS FOR FAX" (page 7-102). I-Fax Settings These settings can be configured when the Internet fax expansion kit is installed.
SYSTEM SETTINGS Printer Condition Settings The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS application. To configure the settings, touch the [Printer Condition Settings] key. Printer Default Settings The default settings are used to set advanced print conditions for printing in an environment where the print driver is not used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed).
SYSTEM SETTINGS Item Selections • (Use Print per Unit) Print per Unit • (Do not use Print per Unit) Output • (Use Staple) Staple • (Do not use Staple) • (Disabled) Quick File • (Enabled) *1 This setting is used to adjust the line width of vector graphics (black & white printing only). Except for CAD and other specialized uses, there is normally no need to change this setting.
SYSTEM SETTINGS PostScript Setting When an error occurs during PostScript printing, these settings determine whether or not an error notice is printed and whether or not the PostScript data is received in binary format. Settings Item Description Selections When a PS (PostScript) error •...
SYSTEM SETTINGS Document Filing Control Document Filing Control is used to create, edit, and delete custom folders for document filing. Touch the [Document Filing Control] key to configure the settings. When the [Document Filing Control] key is touched, the following screen will appear. Back Folder List Add New...
SYSTEM SETTINGS USB-Device Check This lets you check the connection when a USB device is connected to the machine. Touch the [USB-Device Check] key to check the connection. The status of a USB device that is not compatible with the machine will not appear. 7-29 Contents...
SYSTEM SETTINGS User Control This section explains settings for user control. Touch the [User Control] key to configure the settings. • User Control settings can only be configured when "User Authentication Setting" (page 7-50) is enabled. • Depending on the user that logged in, it may not be possible to use the settings below. Amend User Information The information of the currently logged in user can be edited.
SYSTEM SETTINGS SYSTEM SETTINGS (ADMINISTRATOR) This section explains the system settings that are configured by the administrator of the machine. Accessing the System Settings (Administrator) To access the system settings (administrator), the administrator must log in as explained below. When User Authentication is not Enabled When "User Authentication Setting"...
SYSTEM SETTINGS When User Authentication is Enabled When "User Authentication Setting" (page 7-50) is enabled, follow the procedure below to log in. When auto login is enabled, the login screen will not appear. When user authentication is by login name and password (and e-mail address) Administrator login is performed in the user selection screen.
Page 695
SYSTEM SETTINGS Login by user number Touch the [Admin Login] key. User Authentication Enter the administrator password in the administrator password entry screen. This completes the administrator login procedure. The system settings (administrator) can now be used. Admin Login • In addition to login by touching the [Admin Login] key, the system settings (administrator) can also be accessed when login is performed by selecting a user with administrator rights from the user list or by entering a user number with administrator rights.
SYSTEM SETTINGS System Settings (Administrator) List The system settings that appear following administrator login are shown below. The default setting for each item is also shown. • Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings. •...
Page 697
SYSTEM SETTINGS Energy save Item Factory default setting Page 7-62 ■ Energy Save ● Toner Save Mode Print Disabled 7-62 Copy* Disabled ● Auto Power Shut-Off Enabled 7-62 ● Auto Power Shut-Off Timer Varies depending on your machine, 7-62 country and region. ●...
Page 698
SYSTEM SETTINGS Item Factory default setting Page Scan Customize 1 Address Review Customize 2 File Customize 3 Quick File Internet Fax* (Same as Scan) Fax* 7-64 (Same as Scan) USB Memory Scan Customize 1 – Customize 2 – Customize 3 –...
Page 699
SYSTEM SETTINGS Item Factory default setting Page ● Remote Operation Settings Remote Software Operation Operational Authority Prohibited View Password Entry Screen Display in Both PC and MFP Operation from Specified PC Operational Authority Prohibited 7-67 Hostname or IP Address of PC –...
Page 700
SYSTEM SETTINGS Item Factory default setting Page Disabling of Colour Mode* Disabled 7-70 ● Fusing Control Settings 60 - 89g/m (16 - 23 lbs.) 7-70 *1 When a 500-sheet paper feed unit is installed. *2 When a finisher is installed. *3 When a colour-related problem has occurred.
Page 701
SYSTEM SETTINGS Item Factory default setting Page Auto Clear Before Copy Job Execution Disabled 7-73 ● Colour Adjustments 7-74 Initial Colour Balance Setting Factory default state 7-74 Auto Colour Calibration – 7-74 Network Settings Item Factory default setting Page 7-75 ■...
Page 702
SYSTEM SETTINGS Item Factory default setting Page ● Interface Settings 7-77 Hexadecimal Dump Mode Disabled 7-77 I/O Timeout 60 sec. 7-77 Enable USB Port Enabled 7-77 USB Port Emulation Switching Auto 7-77 Enable Network Port Enabled 7-77 Network Port Emulation Switching Auto 7-77 Port Switching Method...
Page 703
SYSTEM SETTINGS Item Factory default setting Page Hold Setting for Received Data Print* Disabled 7-80 Erase Width Adjustment 7-80 • Edge Clearance Width 10 mm (1/2") Settings to Disable Registration 7-80 Disable Registering Destination from Operation Panel All disabled 7-80 Disable Registering Destination on Web Page* All disabled...
Page 704
SYSTEM SETTINGS Item Factory default setting Page Compression Mode at Broadcasting • Black & White MH (G3) 7-83 • Colour/Greyscale Medium Maximum Size of E-mail Attachments (E-mail) Unlimited 7-84 Maximum Size of Data Attachments (FTP/Desktop/Network Unlimited 7-84 Folder) Bcc Setting •...
Page 705
SYSTEM SETTINGS Item Factory default setting Page I-Fax Send Settings 7-86 I-Fax Reception Report On/Off Setting Disabled 7-86 I-Fax Reception Report Request Timeout Setting 1 hour 7-86 Number of Resend Times at Reception Error 7-86 Maximum Size of E-mail Attachments Unlimited 7-86 Rotation Sending Setting...
Page 706
SYSTEM SETTINGS Item Factory default setting Page Delete All Quick Files Delete – 7-89 Delete quick files at power up (protected files excluded) Enabled Default Colour Mode Settings Colour Auto 7-89 Black & White Mono 2 Default Exposure Settings Auto Original Image Type Text 7-89...
SYSTEM SETTINGS User Control User Control is used to configure settings for user authentication. Touch the [User Control] key to configure the settings. User Authentication Setting These settings enable or disable user authentication and specify the authentication method. When user authentication is enabled, each user of the machine is registered. When a user logs in, settings for that user are applied.
SYSTEM SETTINGS Other Settings Actions when the Limit of Pages Automatically print stored jobs for Output Jobs after login This setting determines whether or not a job will be When retention is enabled in the printer driver and print completed if the page limit is reached while the job is in data has been spooled to the machine, you can have the progress.
SYSTEM SETTINGS User List This is used to store, edit, and delete users when user authentication is enabled. When the [User List] key is touched, the following screen appears. User List Back Add New Delete All Users Administrator User Index Switch Other User Name 1 Name 2...
Page 715
SYSTEM SETTINGS Favourite Operation Following the System Settings* Group Card Settings * Not set *1 Items that can be changed. *2 For detailed information of each of the settings, see "List of settings and factory default settings of template groups" (page 7-56). *3 When the HID card reader is enabled.
SYSTEM SETTINGS Page Limit Group List This is used to store groups of Account Limit Settings. The page limits for each user are specified by selecting one of these stored groups when the user is stored. When the [Page Limit Group List] key is touched, the following screen appears. System Settings Page Limit Group List Back...
SYSTEM SETTINGS Authority Group List Use this to store groups of user authority settings. The authority of each user is specified by selecting one of these stored groups when the user is stored. When the [Authority Group List] key is touched, the following screen appears. System Settings Authority Group List Back...
Page 718
SYSTEM SETTINGS List of settings and factory default settings of template groups Item Description Group Name Store the name of the group (max. 32 characters). Select one of the previously stored groups for use as a template for the new group.
Page 719
• Document Filing Image Check Allowed Allowed Prohibited • Display only the Files of Logged-in Prohibited Prohibited Prohibited Users Sharp OSA Approval Setting to Use a Sharp OSA Allowed Allowed Allowed Common Functions [1-Sided/2-Sided [1-Sided/2-Sided [1-Sided/2-Sided Approval Settings for 2-Sided Print Approved]...
SYSTEM SETTINGS Favourite Operation Group List This is used to store favourite operation groups and My Menu. This setting can only be configured in the Web pages. It cannot be configured in the touch panel of the machine. Favourite Operation Group Registration Sets of preferred settings can be as configured and registered groups.
Page 721
SYSTEM SETTINGS My Menu List Home screen settings must be previously stored. Select My Menu when storing a favourite operation group. Settings Item Description My Menu Name Enter a maximum of 32 characters for the home screen name. Select the My Menu to be the Select one of the previously stored My Menu as a template for the new My Menu.
SYSTEM SETTINGS User Count This displays the total number of pages printed by each user. When the [User Count] key is touched, the following screen appears. User Count Back Select All Users Show Delete Administrator User Index Switch Other User Name 1 Name 2 Name 3...
Reset all items of the selected users to "0". Card Settings (when the HID card reader is enabled.) Configure this setting if user authentication will be performed using a Sharp OSA external authentication application and an HID card. Card Reader Device Registration In this setting, the product ID and vender ID of the connected HID card reader are displayed.
SYSTEM SETTINGS Energy Save The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce pollution and conserve natural resources. Touch the [Energy Save] key to configure the settings. Toner Save Mode Auto Power Shut-Off Timer You can reduce the amount of toner used for printing.
SYSTEM SETTINGS Operation Settings Settings related to machine operation can be configured. Touch the [Operation Settings] key to configure the settings. Other Settings Keys Touch Sound Disabling of Bypass Printing This setting is used to adjust (or turn off) the volume of the This is used to disable bypass printing (printing other beep that sounds when you touch a key.
When [Use Custom Image] is selected, the Mode Key image can be changed using a gif file Image of up to 10 KB in size. A shortcut to the Sharp OSA application and keys that appear in "My Menu" can be stored (a Application Keys total of eight keys can be stored).
SYSTEM SETTINGS My Menu Settings Use this to configure the My Menu screen that appears when the [My Menu] key is pressed. The settings are shown below. Item Description Display Title Show a title on the My Menu. Title Enter a maximum of 70 characters for the title name. Display the User Name* Show the currently logged-in user name on the My Menu.
SYSTEM SETTINGS Preview Setting Configure settings for the preview screen that can be used for fax/image send and document filing. Default Preview Set the selection state of the [Preview] key in each of the screens below. Copy Image Send • Scan Send •...
SYSTEM SETTINGS Remote Operation Settings Configure settings required for remote operation of the machine from a computer connected to the same network. Remote Software Operation Operational Authority This is used when remote software is used to operate the machine remotely. When remote software is used to operate the machine remotely, the entry screen for the various passwords entered on the machine (such as login passwords) can be View Password Entry Screen...
SYSTEM SETTINGS Device Control These settings control devices installed on the machine. Touch the [Device Control] key to configure the settings. Other Settings AB/Inch Type Setting Original Feeding Mode The numbers and units of the default settings and input The following original feeding modes can be set to ranges that appear in the setting screens can be operate by default in copy, Scan to HDD, and image switched between inches and AB sizes.
SYSTEM SETTINGS Optimization of a Hard Disk This function optimizes the hard drive of the machine by defragmenting data. If a job is in progress, a message will appear and optimization will not begin until the job is finished. During optimization, the following operations are not possible: •...
SYSTEM SETTINGS Disabling of Devices Use these settings when a peripheral device on the machine has failed or when you wish to temporarily disable a device. Disabling of Document Feeder Disabling of Offset (When a finisher is installed.) Use this setting to prohibit the use of the automatic document feeder, such as when the feeder malfunctions.
SYSTEM SETTINGS Copy Function Settings The following settings are related to copying. Touch the [Copy Function Settings] key to configure the settings. Default settings selected with these settings apply to all functions of the machine (not just the copy function). Initial Status Settings The copier settings are reset when the [POWER] key ( ) is turned on, when the [CLEAR ALL] key (...
SYSTEM SETTINGS Other Settings Copy Exposure Adjustment Card Shot Settings This is used to adjust the exposure level when [Auto] is This is used to set the default original size for the card used for the copy exposure. shot function. Both the X (horizontal) and Y (vertical) dimensions of the Colour original can be set from 25 mm (1") to 210 mm (8-1/2") in...
Page 735
SYSTEM SETTINGS Auto Selection of Paper Tray that B/W 600dpi x 600dpi Scanning was Last Loaded Mode for Document Feeder When this setting is enabled and the machine is on The resolution for copying in black and white using the standby in copy mode, the last paper tray that was automatic document feeder can be changed from 600 x loaded with paper automatically becomes the default...
SYSTEM SETTINGS Colour Adjustments The following colour settings can be configured. Initial Colour Balance Setting Colour balance values obtained using "Colour Balance" in the special modes can be stored in a program (1 to 48), and those values can be retrieved and stored as the initial colour balance setting.* Use this feature when you want to repeatedly use a colour balance setting for a favourite colour or for correction when a change occurs...
SYSTEM SETTINGS Network Settings Network settings are described below. Touch the [Network Settings] key to configure the settings. When settings are changed, the changes will take effect after the machine is restarted. To restart the machine see "TURNING THE POWER ON AND OFF"...
SYSTEM SETTINGS Printer Settings Settings related to the printer function can be configured. Touch the [Printer Settings] key to configure the settings. Default Settings Printer condition settings are described below. Prohibit Notice Page Printing Bypass Tray Settings This setting is used to disable printing of notice pages. Enable Detected Paper Size in Bypass Tray A notice page is printed when printing cannot be This is used to prohibit printing when the paper size...
SYSTEM SETTINGS Interface Settings These settings are used to control and monitor data transmitted to the USB port or network port of the machine. Hexadecimal Dump Mode Enable Network Port This function is used to print the print data from a This is used to enable printing from the network port.
SYSTEM SETTINGS Auto Colour Calibration This is used to perform automatic colour correction when the colour copy or print output appears to contain the incorrect colours throughout the document. The machine prints a test patch, the test patch is scanned, and the colour is automatically corrected.
SYSTEM SETTINGS Image Send Settings Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] key to configure the settings. For explanations of settings related to the fax function, see "SYSTEM SETTINGS FOR FAX"...
Page 742
SYSTEM SETTINGS Must Input Next Address Key at Erase Width Adjustment Broadcast Setting This is used to set the default erase width for erase function. Specify a value from 0 mm (0") to 20 mm (1") in This setting is used to require that the [Next Address] increments of 1 mm (1/8") for edge erase.
Page 743
SYSTEM SETTINGS Disable Registration of Program Settings to Disable Transmission This prohibits the use of the address book when a These settings are used to disable the following program is stored. transmission operations. Configure the setting for each of the following items: •...
Page 744
SYSTEM SETTINGS Own Name and Destination Set Use this setting to enter the Internet fax address, fax number of the machine and the name of the user. Sender Data Registration Use this to store the sender name for fax and Internet fax, the sender number for fax, and the sender address for Internet fax.
SYSTEM SETTINGS Scan Settings Settings related to scanning can be configured. Other Settings Initial File Format Setting This is used to set the default file format for Scan to E-mail and USB memory mode when the e-mail address Default Sender Set is entered manually by touching the [Address Entry] key.
Page 746
SYSTEM SETTINGS Maximum Size of E-mail Pre-Setting Mail Signature Attachments (E-mail) A signature can be automatically appended to the end of the body text of e-mail. This is convenient when it is a To prevent the transmission of excessively large image corporate policy to append a specific signature at the files by Scan to E-mail, a file size limit can be set from end of e-mail.
SYSTEM SETTINGS I-Fax Settings These settings can be configured when the Internet fax expansion kit is installed. Transaction Report Print Select I-Fax Default Settings Setting These settings are used to configure the default settings for Internet fax. This is used to select whether or not a transaction report will be printed, and if printed, the condition for being printed.
Page 748
SYSTEM SETTINGS Activity Report Print Select Setting I-Fax Send Settings This is used to have the Image Sending Activity Report I-Fax Send Settings are described below. stored in the machine's memory automatically print at specified times. The Image Sending Activity Report can be set to I-Fax Reception Report On/Off automatically print each time the number of transactions Setting...
Page 749
SYSTEM SETTINGS Rotation Sending Setting I-Fax Receive Settings When transmitting an image that is one of the following I-Fax Receive Settings are described below. sizes, this function rotates the image counterclockwise 90 degrees. (The setting can be configured separately for each size.) Auto Receive Reduce Setting B5, A5, 5-1/2"...
SYSTEM SETTINGS Letter Size RX Reduce Print Allow/Reject Mail or Domain Name Setting This program is not available in Canada and Philippines. When a letter (8-1/2" x 11") size fax is received, this This setting is used to allow or refuse reception from setting reduces the fax to A4 size.
SYSTEM SETTINGS Document Filing Settings Document filing settings are described below. Touch the [Document Filing Settings] key to configure the settings. Other Settings Default Mode Settings Default Colour Mode Settings This is used to specify which mode, Sharing or This sets the default settings for black & white and colour Confidential, is used as the default mode when storing a when Scan to HDD is used.
SYSTEM SETTINGS Colour Data Compression Ratio Setting [Low], [Medium], or [High] can be selected for the default compression ratio for transmission of a stored colour file. Scan Complete Sound Setting This setting adjusts the volume of the beep that sounds when scanning ends.
SYSTEM SETTINGS Document Output Options The use of a stored file can be allowed or prohibited by operation type and by the mode from which the file was stored. The items that appear will vary depending on the functions that have been added to the machine. Item Description Print...
SYSTEM SETTINGS List Print (Administrator) This is used to print lists and reports that are only for use by the administrator of the machine. Touch the [List Print (Administrator)] key to configure the settings. Administrator Settings List Lists of the administrator settings for the following modes can be printed.
SYSTEM SETTINGS Security Settings The following settings are related to security. Touch the [Security Settings] key to configure the settings. SSL Settings IPsec Settings SSL can be used for data transmission over a network. IPsec can be used for data transmission/reception on a SSL is a protocol that enables the encryption of network.
SYSTEM SETTINGS Enable/Disable Settings The following settings are used to prohibit the use of certain functions. Touch the [Enable/Disable Settings] key to configure the settings. The Enable/Disable Settings control the same parameters as the enable/disable settings in other settings. The settings are linked together (changing one setting changes the other).
Page 757
SYSTEM SETTINGS Copy Function Settings Image Send Settings Disabling Deletion of Job Programs Other Disabling This is used to prohibit the deletion and changing of copy Disable Switching of Display Order settings stored in job programs. This is used to prohibit changes to the order of display Disabling of Bypass-Tray in Duplex Copy (search number order, ascending, descending) in the This is used to prohibit the use of the bypass tray when...
Page 758
SYSTEM SETTINGS Disable Registering Destination on Web Page Settings to Disable Transmission (When network connection is enabled.) These settings are used to disable the following This disables address control from the Web pages. transmission operations. • Group (Direct Entry) Disable [Resend] on Image Send Mode •...
SYSTEM SETTINGS Change Administrator Password This is used to change the administrator password. Touch the [Change Administrator Password] key to change the password. When changing the password, be sure to remember the new password. It is recommended that you periodically change the administrator password. Password Enter the new administrator password (5 to 32 characters).
SYSTEM SETTINGS Product Key The procedures for entering the product keys of the expansion kits are explained below. Touch the [Product Key] key to configure the settings. • It may not be possible to use some settings, depending on the peripheral devices installed. •...
• This function cannot be used while the system settings are in use, while a job is being executed, or when there is a reserved job. • For machines for which data can be imported, contact your SHARP dealer or nearest authorised service representative. Storage Backup...
SYSTEM SETTINGS Storing/Calling of System Settings The current system settings can be stored, previously stored system settings can be retrieved, and the factory default system settings can be restored. Touch the [Storing/Calling of System Settings] key to configure the settings. Restore Factory Defaults This is used to return the system settings to the factory default settings.
Sharp OSA Settings External Account Setting Job Priority Preference External Account Control Set the playing speed of the animation in the Sharp OSA When this setting is enabled, the machine enters application. external totaling mode and the totaling function can be The following settings can be configured.
SYSTEM SETTINGS SYSTEM SETTINGS FOR FAX This section explains system settings that are specifically for the fax function. The system settings for the fax function can only be configured when the facsimile expansion kit is installed. System Settings for Fax (General) List When the system settings for fax are accessed with general rights, the following items appear.
SYSTEM SETTINGS Address Control Address Book This section explains items specifically used for fax in "Address Control". For items that are also used for other functions, see "Address Control" (page 7-17). When the [Address Book] key is touched, the following screen appears. Address Book Back Sort Address...
Page 766
SYSTEM SETTINGS Settings Item Description General items stored Select the type of address to be stored in the address book. Address Type In this case, select [Fax]. Set a search number. The lowest available number is automatically entered. To Search Number change the number, enter a number from 001 to 999.
SYSTEM SETTINGS F-Code Memory Box This section explains how to store memory boxes for various types of F-code communication. When the [F-Code Memory Box] key is touched, the following screen appears. System Settings F-Code Memory Box Back Add New Sort Polling Memory Box 1 Box 2...
Page 768
• [ ] and [#] cannot be used in a sub-address. • Do not forget the Print PIN. In the event that you forget the Print PIN or need to verify the Print PIN, contact your SHARP dealer or nearest authorised service representative.
SYSTEM SETTINGS Fax Data Receive/Forward This section explains settings for reception and forwarding. Fax Settings The following items appear when the "Fax Settings" are configured. Item Description Set the fax reception method. • Auto Reception: When a call comes in, the machine rings and then automatically begins fax reception.
SYSTEM SETTINGS System Settings for Fax (Administrator) List When the system settings for fax are accessed with administrator rights, the following items appear. For information on the general settings, see "System Settings for Fax (General) List" (page 7-102). • For the procedure for using the system settings (administrator), see "Accessing the System Settings (Administrator)"...
Page 771
SYSTEM SETTINGS Item Factory default setting Page Transaction Report Print Select Setting • Single Sending Print Out Error Report Only • Broadcasting Print Out All Report 7-111 • Receiving No Printed Report • Confidential Reception Print Out Notice Page Activity Report Print Select Setting •...
SYSTEM SETTINGS Image Send Settings Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] key to configure the settings. Fax Settings Pause Time Setting Fax Default Settings Use this to change the length of pauses inserted in fax The fax settings can be enabled or disabled to suit the numbers.
SYSTEM SETTINGS Original Print on Transaction Activity Report Print Select Setting Report This is used to have the Image Sending Activity Report that is stored in the machine's memory printed at regular When a transaction report is printed for a memory intervals.
SYSTEM SETTINGS PBX Setting Fax Send Settings This Setting can only be activated in France and Settings for fax transmission can be configured. Germany. When the machine is used on a PBX, you can enable the PBX setting to have the machine automatically Rotation Sending Setting connect to the outside line.
Page 775
SYSTEM SETTINGS Recall in Case of Line Busy Recall in Case of Communication Error This program is used to set the number of recall This determines how many times your machine will attempts and the interval between recall attempts when automatically re-attempt the call if a fax transmission a transmission is not successful due to the line being fails due to a communication error.
SYSTEM SETTINGS Auto Receive Reduce Setting Fax Receive Settings When a fax is received that includes the sender's name Settings for fax reception can be configured. and number, the received image is slightly larger than the standard size. This setting is used to automatically reduce the image to fit the standard size.
SYSTEM SETTINGS Receiving Date & Time Print Allow/Reject Number Setting Enable this setting to have the date and time of Use this setting to specify whether reception from a reception printed. stored number is to be allowed or rejected. Select [Inside the Received Image] or [Outside the Item Description Received Image] for the position where the date and...
SYSTEM SETTINGS APPENDIX System Settings Menu Total Count Job Count Device Count Default Settings Clock Adjust Keyboard Select List Print (User) All Custom Setting List Printer Test Page Sending Address List Document Filing Folder List Paper Tray Settings Tray Settings Paper Type Registration Auto Tray Switching Custom Size Registration (Bypass)
Page 779
IEEE802.1X Setting Enable/Disable Settings Change Administrator Password Product Key Data Backup Storage Backup Device Cloning Storing/Calling of System Settings Restore Factory Defaults Store Current Configuration Restore Configuration Sharp OSA Settings External Account Setting USB Driver Settings Job Priority Preference 7-117 Contents...
CHAPTER 8 TROUBLESHOOTING This chapter provides solutions to possible problems in a question and answer format. Locate the question that relates to your problem and use the answer to help correct the situation. If you are unable to solve a problem using this manual, please contact your dealer or nearest authorised service representative.
Page 781
TROUBLESHOOTING SCANNING / INTERNET FAX • PROBLEMS RELATED TO SCANNING / INTERNET FAX OPERATION ... . . 8-34 • PROBLEMS RELATED TO SCAN RESULTS ......8-37 •...
TROUBLESHOOTING TROUBLESHOOTING PROBLEMS The chart below shows the procedure to follow in the event a problem occurs. Use it as a troubleshooting guide. Check this chapter first You may find a solution to your problem here. Ask the administrator for help Inform the machine's administrator of the nature of the problem and ask for help.
TROUBLESHOOTING FREQUENTLY ASKED QUESTIONS MAKING A COPY OF A NON-STANDARD SIZE ORIGINAL The procedure for making a copy of a payment slip or other non-standard size original is explained below. The "Centring" special mode of copy mode can be selected to position the copied image in the centre of the paper.
TROUBLESHOOTING 3 Place paper in the bypass tray. 4 Select the bypass tray. The bypass tray is used here to copy From the base screen of copy mode, onto paper that is not loaded in any of touch [Paper Select] and then "Bypass the paper trays of the machine.
Page 785
TROUBLESHOOTING Checking port settings in the printer driver Display the printer driver's Properties dialog box and click the [Port] tab. SHARP MX-XXXX Do your port settings look like this? SHARP MX-XXXX Your port settings should look like this. Contents...
TROUBLESHOOTING PRINTING ON ENVELOPES The procedure for printing on an envelope is explained below. Only the name and address side of an envelope can be printed on. It is recommended that you do a test print to check the print result before using an envelope.
TROUBLESHOOTING CHANGING THE PAPER SIZE USED FOR A PRINT JOB When the size of paper specified for a print job is not loaded in any of the machine's paper trays, follow the steps below to change the paper size. Paper Empty Paper Empty 1 Check detail on the job.
TROUBLESHOOTING ADJUSTING THE VOLUME OF THE RINGER If the ringing sound made when the machine receives a fax is too loud or too soft, follow the steps below to adjust the volume. The fax ringer volume is adjusted in the system settings (administrator). Press the [SYSTEM SETTINGS] key on the operation panel, touch [Image Send Settings] - [Fax Settings] - [Fax Default Settings] - [Speaker Settings] - [Ringer Volume] in that order, and then select the desired volume.
TROUBLESHOOTING REMOVING MISFEEDS This section explains what to do when a paper misfeed occurs in the machine. Caution The fusing unit is hot. Take care not to burn yourself when removing a misfeed. • When removing misfed paper, do not touch or damage the transfer belt. Fusing unit •...
TROUBLESHOOTING HOW TO REMOVE MISFEEDS If you require more information when reading the instructions in the touch panel, see the paper misfeed illustrations below. Refer to the illustration below and then go to the appropriate illustration (1 to 10) for your situation. ☞...
Page 791
TROUBLESHOOTING (2) Paper misfeed in the output area (5) Paper misfeed in the reversing unit Remove the misfed paper. Open the right side cover, open the paper conveyor cover, and remove the paper. If the misfeed is not in the (3) Paper misfeed in the fusing unit above location, grasp the If a paper misfeed has...
Page 792
TROUBLESHOOTING (9) Paper misfeed in tray 1 to tray 4 (in the (10) Paper misfeed in the finisher tray) Open the front cover. When a paper gets twisted to the roller, remove the tray and remove the misfeed paper. While pressing the lever over to the left, slide the finisher to When pulling out a tray, be sure to open the right the left until it stops.
TROUBLESHOOTING REMOVING STAPLE JAMS Follow the steps below to remove a staple jam. FINISHER Caution Take care that a bent staple does not hurt you. Open the cover. While pressing the lever over to the left, slide the finisher to the left until it stops. Gently slide the finisher until it stops.
Page 794
TROUBLESHOOTING Lower the lever at the front end of the staple case. Replace the staple case. Push the staple case in until it clicks into place. Slide the finisher back to the right. Gently slide the finisher back to the right until it locks into its original position.
TROUBLESHOOTING INSTALLING THE SOFTWARE WHEN INSTALLATION WAS NOT SUCCESSFUL • The software cannot be installed........... . .8-16 •...
Page 796
TROUBLESHOOTING Problem Point to check Solution The machine is not Is the machine power on? Switch on the main power switch and the [POWER] detected (when key ( ) in that order. (In Windows, search again after connected to a powering on the machine.) network).
TROUBLESHOOTING Problem Point to check Solution The printer driver is Did you connect the machine to your Check the details below and reinstall the printer not installed correctly computer before installing the printer driver correctly. by plug and play (USB driver? If the machine was connected to your computer with a connection in...
TROUBLESHOOTING COPYING PROBLEMS RELATED TO COPYING OPERATION • Copying does not take place............8-19 •...
Page 799
TROUBLESHOOTING Problem Point to check Solution Two-sided copying Does the paper type setting of the Check "Tray Settings" in the system settings. If the does not take place. selected tray specify a type of paper that [Disable Duplex] checkbox is selected , two-sided cannot be used for two-sided copying? copying using that tray will not be possible.
TROUBLESHOOTING PROBLEMS RELATED TO COPY RESULTS Problem Point to check Solution The image is too light Is the image too light or too dark? Select an appropriate exposure mode for the or too dark. original being copied and adjust the exposure level manually.
TROUBLESHOOTING PRINTING PROBLEMS RELATED TO PRINTING OPERATION • Printing does not take place............8-22 •...
Page 802
TROUBLESHOOTING Problem Point to check Solution Printing does not take Is the IP address selected correctly? Check the IP address setting. place. (Windows) If the machine does not have a permanent IP address (the machine receives an IP address from a DHCP server), printing will not be possible if the IP address changes.
Page 803
TROUBLESHOOTING Problem Point to check Solution Printing does not take Is the I/O timeout setting too short? Check with your administrator. place. If the I/O timeout setting is too short, errors may occur while writing to the printer. Ask the administrator of the machine to configure an appropriate time in "I/O Timeout".
TROUBLESHOOTING Problem Point to check Solution Direct printing of a file Is "IPsec Settings" enabled on the Check with your administrator. in a shared folder on a machine? When "IPsec Settings" is enabled in the system settings computer is not (administrator), direct printing of a file in a shared folder possible.
Page 805
TROUBLESHOOTING Problem Point to check Solution Colours are off. Did you perform "Registration Ask your administrator to perform "Registration Adjustment"? Adjustment". If the colours are out of position in the printed output of a colour print job, "Registration Adjustment" can be used to adjust the print position of each colour.
Page 806
TROUBLESHOOTING Problem Point to check Solution The image is upside Is the correct binding position selected Be sure to set the appropriate binding position. down. for two-sided printing? When two-sided printing is performed, every other page is printed upside down when tablet binding is selected for the binding position.
Page 807
TROUBLESHOOTING FACSIMILE PROBLEMS RELATED TO TRANSMISSION • Transmission does not take place........... .8-29 •...
TROUBLESHOOTING PROBLEMS RELATED TO TRANSMISSION Problem Point to check Solution Transmission does Is the telephone line connected Check the telephone line socket, the wall socket, and not take place. securely? any extension adapters to make sure that all connections are secure. ☞...
Page 809
TROUBLESHOOTING Problem Point to check Solution Transmission does Does the job status screen (completed Perform the transmission again. not take place. jobs) or a transaction report indicate that If the transmission is still not successful after recalling is the transmission was not successful? performed as set in "Recall in Case of Line Busy"...
TROUBLESHOOTING PROBLEMS RELATED TO RECEPTION Problem Point to check Solution Printing does not take Does a message appear in the display Restore printing capability as instructed by the place after reception. instructing you to add toner or paper? message. (Printing is not possible when this screen appears.) Does a password entry screen appear? Enter the correct password with the numeric keys.
TROUBLESHOOTING PROBLEMS RELATED TO TELEPHONE Problem Point to check Solution Dialling is not Is the extension phone connected? Check connections. possible. Check the telephone line socket, the extension phone socket, the wall socket, and any extension adapters to make sure that all connections are secure. You cannot talk to the Did you dial using the speaker? Use the extension phone.
Page 812
TROUBLESHOOTING PROBLEMS RELATED TO ONE-TOUCH INDIVIDUAL KEYS / GROUP KEYS Problem Point to check Solution A one-touch individual Has the maximum number of keys been Delete one-touch keys and group keys that are not key or group key stored? being used. cannot be stored.
TROUBLESHOOTING SCANNING / INTERNET FAX PROBLEMS RELATED TO SCANNING / INTERNET FAX OPERATION • Transmission does not take place........... .8-34 •...
Page 814
TROUBLESHOOTING Problem Point to check Solution Transmission does Does the image file exceed the e-mail Check with your administrator. not take place. attachment limit set in the system If your administrator has set a limit on the size of settings (administrator)? transmitted files, a file that exceeds the limit cannot be transmitted.
Page 815
TROUBLESHOOTING Problem Point to check Solution The received image Does the viewer program used by the Use a software program that is capable of opening file cannot be opened. recipient support the format of the the selected file type and compression mode. received image data? The recipient may be able to open the file if you change the file type and compression mode selected at the time...
TROUBLESHOOTING PROBLEMS RELATED TO SCAN RESULTS Problem Point to check Solution The scanned image is Is the original scan size setting smaller Set the scan size to the actual original size. clipped. than the actual original size? If you have intentionally set a smaller size than the actual original size, note carefully the placement position of the selected scan size when placing the original.
Page 817
TROUBLESHOOTING Problem Point to check Solution The scanned image is Are Internet fax addresses included in Send the image to the scan mode destinations in a upside down or on its the transmission? separate transmission. side. When both scan mode and Internet fax destinations are included in a broadcast transmission, the original transmission orientation of Internet fax takes precedence, and thus the file may not appear in the...
Page 818
TROUBLESHOOTING PROBLEMS RELATED TO ONE-TOUCH INDIVIDUAL KEYS / GROUP KEYS Problem Point to check Solution A one-touch individual Has the maximum number of keys been Adjust the number of stored keys. key or group key stored? Delete one-touch keys (or group keys) that are not cannot be stored.
TROUBLESHOOTING Problem Point to check Solution A filed data can not be Have functions been disabled by the Check with your administrator. printed. administrator? Some functions may have been disabled in the system settings (administrator). Check with your administrator. When user authentication is enabled, the functions that you can use may be restricted in your user settings.
TROUBLESHOOTING Problem Point to check Solution A file name cannot be Does the name include characters that The following characters cannot be used in a file or stored or changed. cannot be used in a file or folder name? folder name: \ ? / "...
TROUBLESHOOTING PROBLEMS RELATED TO MACHINE OPERATION Problem Point to check Solution Specified machine Have functions been disabled by the Check with your administrator. functions cannot be administrator? Some functions may have been disabled in the system used. settings (administrator). Check with your administrator. When user authentication is enabled, the functions that you can use and page counts may be restricted in your user settings.
TROUBLESHOOTING Problem Point to check Solution The operation panel Does the message "Call for service. Switch the power off and then restart the machine. cannot be used. Code:xx-xx*." appear in the touch Make sure that the LINE indicator is not lit and that the panel? DATA indicator is not blinking or lit and then switch off *Letters and numbers appear in xx-xx.
Are multiple sheets feeding at once? Fan the paper well before loading it. Are you using paper that is not within Use SHARP-recommended paper. Using paper that is the specifications? not supported may result in misfeeds, creases, or smudges.
TROUBLESHOOTING Problem Point to check Solution The paper misfeeds. Has the correct paper size been set? If you are using a special size, be sure to specify the paper size. If the size of paper loaded in a tray was changed, be sure to check the paper size setting.
Point to check Solution Smudges appear on Are you using paper that is not within Use SHARP-recommended paper. Using paper that is printed output. the specifications? for other models or special paper that is not supported may result in misfeeds, creases, or smudges.
TROUBLESHOOTING Problem Point to check Solution Part of the image is Has the correct paper size been set? If you are using a special size, be sure to specify the cut off. paper size. If the size of paper loaded in a tray was changed, be sure to check the paper size setting.
TROUBLESHOOTING Problem Point to check Solution The finisher does not Does a message appear indicating that Remove all remaining paper from the stapler compiler. operate. you need to remove paper from the stapler compiler? Does the following message appear in Check the connection cable.
TROUBLESHOOTING Problem Point to check Solution The touch panel Is the display contrast properly Touch the brightness adjustment key ( ) on the screen is difficult to adjusted? system bar in the touch panel to adjust the view. brightness. ☞ 1.